Chinese Scooter Headlight Upgrade 2020

[@andyproctor3588]

The tail light video and the headlight video super safety cannot thank you enough my friend you're helping so many people these last two videos can easily save lives for very little money very little work thanks my South Florida friend

[@VirberelloScooterTips]

Hello my friend finally with this new lights I can see better at night time and I hope this video is going to help lots of scooters owners to upgrade their lights and be more visible on the road thank you for watching my video my Florida friend and be safe

[@Youcefdjezzar98]

Thank you virberello for your vidéo take Care for your self

[@VirberelloScooterTips]

Thank you for watching my video

[@kamilkarol5320]

Hi, I am a fanatic of these scooter models. I am so glad I found your channel and your mods. Thank you very much for your movies. U R my Men bro, hands up.

[@VirberelloScooterTips]

Hello Karol thank you for watching my video and be safe

[@jbnicaragua1]

Thank you for the video 👌🏽 really helpful

[@VirberelloScooterTips]

Glad it was helpful!

[@iamjeromeflores611]

I have 2 led bars on mine (2017tao tao lancer powersports 150cc)..i deleted the hood since the hood was too brittle and the attatchment was also gone.. i connected the led wires to stock harness going to bulb.. i cut the connections to bulbs and rewired the led bars.i got it on autozone for 30bucks each.

[@The1NightBaker]

The replacement low/high bulb will it fit all gy6 150cc? I have a icebear trifecta PST150-2 model... Also do you know the size led front turn signal bulb.

[@kan815k]

If you are getting a AC volts at the bulb holder, these LED lights will last only for few hours or burn out soon. Need to go through rectifier first.

[@NotThePulla]

I was just gonna comment this, I did this with these bulbs, and the exact thing youre saying happened one ride with a decent section WOT and got home and both bulbs blew the lowbeam circuits and the dash was showing my high beams on all the time no matter what I did wiht the switch. I ordered a 12v full wave rectifier and am thinking i hook that up to the yellow wire going into the lights low/high switch to see if that resolves the issue. Fingers crossed

[@baxdesign]

I have the same model scooter as the one you didn't upgrade here - do you know if it also uses T10 and BA20D bulbs please?

[@VirberelloScooterTips]

Hello Mark both scooter on the front they use s2 35/35 bulbs but you can use ba20d an t10 but to run them better you will have to run them from a stable 12 volts source like your white wire on the scooter or the yellow wire will make them fliker

[@baxdesign]

@@VirberelloScooterTips Champion, thank you.

[@epkugelman]

Great video my friend! I appreciate you making it.

[@VirberelloScooterTips]

Hello my friend thank you for watching my video

[@Nightmare038]

I have a La Souris Sourini 2020 model with yellow light, can i change that to LED without any problems?

[@vamountainman2512]

Only thing I would add is, If you live in a cold climate. The Plastic is 100x more delicate and easy to break in cold temperatures. If you have to mess with the plastic in winter, be extra cautious or do in a heated garage.

[@stevensuarez8443]

Hello my friend, I own a 2021 Amigo 150 Avenza would this type of light work as an upgrade for my scooter?

[@VirberelloScooterTips]

Hello my friend that I’m not sure the best thing to do is to open your light and check the size

[@stewheff1290]

I can't wait to put my clutch in today

[@VirberelloScooterTips]

Thank you for watching my video and have fun fixing your scooter

[@m.joeymcgrath6842]

Hey. I have the kymco agility scooter and my low beam headlight is blown. I can use the high beam lights though. Are the bulbs easy to change and do most automotive stores have the bulbs? Thank you.

[@VirberelloScooterTips]

Hello my friend yes the head light are easy to change you only need to remove the front plastic cover and remove the headlight assembly but the light bulbs are not easy to find at any automotive store because scooter use a lower voltage then cars but so I order all my lights on line but sometimes is possible that some auto store have them in stock

[@m.joeymcgrath6842]

@@VirberelloScooterTips Thank you for your response. I took off the part which the headlights are in and they are covered by plastic and it looks it be easier to take the bulb holder out with pliers and take the bulb to an automotive store and see if they have one in stock?

[@VirberelloScooterTips]

@@m.joeymcgrath6842 sometime they have them make sure is the same watt because if is to many watt the light will run to hot and will melt the headlight assembly

[@m.joeymcgrath6842]

@@VirberelloScooterTips hey there, I will un-Do the cover for the headlight and try to pull the light plug out with pliers and take it to one of the automotive stores or 2 places which may have the bulb?

[@cityofjoy2576]

You also have to unplug your scooters. Power wire from the headlight directly from the headlight and run it to DC current. Not the alternating current that it's currently connected to. Or it will flicker.

[@VirberelloScooterTips]

Great idea and thank you for watching my video

[@velcrodreams178]

Your the coolest Italian I know 😎

[@VirberelloScooterTips]

Hello my friend ah ah ah thank you for watching my video

[@velcrodreams178]

Thanks for responding sir you have great energy God bless you !

[@Pinhead_larry265]

Already upgraded to led lights, as always great video virbello

[@VirberelloScooterTips]

Hello my friend Larry thank you for watching my video

[@xxmiami4lifexx]

Hello Bello thanks for the videos I did the led swap on my peace sport 150 like you did and while I was at it added the multimeter and all around leds everything working 100percent but my headlight flicker during low idle and start working better when I’m driving longer distances?

[@VirberelloScooterTips]

Hello my friend yes the led will flicker a little at low idle the only way to fix that is to upgrade to a larger stator with 8 to 11 poles or connect the leds directly to the battery . Thank you for watching my video

[@xxmiami4lifexx]

@@VirberelloScooterTips do you have a video for a stator upgrade lol

[@xxmiami4lifexx]

@@VirberelloScooterTips would a led resistor work ?

[@christophermcallister929]

Thank you so much for all your help 💯💪

[@VirberelloScooterTips]

Hello my friend thank you for watching my video

[@vuyanimfeka1522]

Hello I own a PGO X-HOT 125 and I just found out the headlights relay burnt out because for the couple of days I had no lights.so today I decided to check so I found the problem, what I do want to find out is can I replace it with any as long as it matches the volts and amps? PGO parts aren't easy to come by in South Africa as the brand itself is scarce. Many thanks

[@jesspatel1828]

So will these lights work on Chinese mopeds with just one bulb? I imagine the bulbs version mopeds are smaller. Cant imagine you having twice the light

[@VirberelloScooterTips]

Yes they will work with one light scooter but make sure you have a 150 cc or more scooter because they have a bigger stator alternator or your like will flicker unless you connect the light directly to the battery

[@jesspatel1828]

@@VirberelloScooterTips Ohhh ok I see. Mine is only a 50cc a Tao Tao Pony or ATM50.

[@joecantu3416]

Where can I find these LED’s? I found the Sylvania ones. But not the main headlights!

[@VirberelloScooterTips]

Hello Joe I buy all my part on Amazon but some of the lights they do not last to long for poor quality

[@harveysayles7627]

Thankyou ! Will be doing this very soon !

[@VirberelloScooterTips]

Hello Harvey thank you for watching my video

[@clifforddeschaine6346]

I just bought a taotao lancer 150cc...Still waiting for it !!!What kind of scooter do you have ?

[@VirberelloScooterTips]

Hello Cliff my is a Eagle Gy6 150cc motor I like that motor because the parts are cheap and you can switch pats like a lego ah ah ah Thank you for watching my video and ride safe

[@just4kicks950]

🌟I've already did the upgrade & that was a nice choice in LED bulbs my friend 👍I like the aluminum heat sinks, protects LED from unwanted heat . My only complaint about mine, not much of difference between Hi & low beams . Not a deal breaker for me luv, em . Thanks for sharing 👊🙌 Salute 😎

[@VirberelloScooterTips]

Hello my friend I'm very happy about this Led upgrade I finally can see at night ah ah ah thank you for watching my video

[@ironhead320]

Big improvement

[@VirberelloScooterTips]

Thank you for watching my video

[@dxvidb01]

Hey are all Chinese mopeds like this? Wanna change my lightsb

[@VirberelloScooterTips]

all Chinese are very similar but if you have a 50 cc the led light will not work great because smaller stator and smaller battery

[@kingant1777]

I've recently purchased my 49cc Chinese scooter .I got it mostly for work since I done Uber eats in nyc . I've notice that the stock headlight are really trash after sunset and very often I find myself hitting a lot of potholes . How are these lights ? Are they good lighting up the road ahead of you while riding ?

[@VirberelloScooterTips]

Hello the led light work great but they flicker a little so the best way to install them will be to go directly to the battery or the rewire from the regulator

[@NotThePulla]

@@VirberelloScooterTips Do you have a video you can link where you've wired the headlights into the rectifier? Im guessing its the Yellow wire in the headlight switch, that goes into the rectifier, and the positive from the rectifier goes into where the yellow wire was in the switch. Thanks! Great videos

[@lukasbabb8330]

Can you do a video on what wires to check and how to do testing if your main light, lo/hi are not working at all? Mine is not and I cannot figure it out, signal lights and dash lights all work.

[@VirberelloScooterTips]

Hello Lucas great idea I will think about that but in the seme time check the yellow wire coming from the stator and search for gy6 150cc electrical diagram that will help you a lot

[@scottwest3677]

Hi I have a sinnis shuttle will these bulbs be ok to fit thanks

[@VirberelloScooterTips]

Hello my friend I'm not sure but check on amazon because they have more then one amzn.to/3n30ZOS just remove your light and look but if you have a 50cc scooter they flicker to much because the 50cc stator is to small but you can always run wires to the battery and fix the problem . Thank you for watching my video

[@crankshaft30]

sir your headlight takes power from alternator. alternator produces ac (alternative current) but leds work with dc only. you can see your lights flickers because of ac

[@VirberelloScooterTips]

Yes the led light flicker in the video camera but not in reality because when the frequency of the camera's frame rate per second (FPS) and the LEDs don't quite match, the flicker becomes visible on the camera screen the video has different speed and they working ok with ac for the 150cc scooter if you have 5 pole stator or more poles / heads in the stator now if you make the led light to work on dc direct from the battery they will work 100% better you are completely right . Thank you for watching my video and be safe

[@joshc7765]

Do these lights work for a 50cc scooter? If not any recommendation?

[@VirberelloScooterTips]

Hello No unfortunately 50 cc has a small stator and on 50 cc the lights will flicker a lot more you will have to run the positive wire directly to the battery at that point they will work a lot better

[@skipperdan1]

Thanks for another great video. Since I also live in Florida like you, I assume that I will be able to upgrade to these lights. I looks like two of the lights are "flashing". Are they really flashing or is this just because the scooter is running and vibrating?

[@VirberelloScooterTips]

Hello Skipperdan 1 sometime they flicker at very low idle but over 0.500 rpm there is no problem in the video you can see more white led flickering because the camera recording frame does not have same frame alignment per second . Thank you for watching my video

[@Zerotletien]

I bought a light for my scooter, and only the Big beam works, when I switch it to my low beam, it turns off, do u maybe have a solution?

[@VirberelloScooterTips]

Hello my friend that is a little strange make sure the lower part of the light is clean and the socket where you place the light is clean with no corrosion . Thank you for watching my video

[@Yenkna_PCs]

I own an Icebear Minicruzzer and I'm thinking about replacing the tail light with LED.

[@VirberelloScooterTips]

Hello Yenkna the quality of the red rear light is not there yet they burn little to easy but the front led light are good is your scooter is 150cc if your scooter is a 50cc light are not good and they flicker to much unless you connect them directly to your battery anyway thank you for watching my video and be safe

[@UncleHoCM]

Are the bulbs flickering at idle?

[@VirberelloScooterTips]

Hello Duc Yes sometime they do. Thank you for watching my video

[@UncleHoCM]

@@VirberelloScooterTips I think it's because it's AC to DC voltage. They have capacitors or something of the sort to fix that I think.

[@Mikeb8134]

thx

[@VirberelloScooterTips]

Hello my friend thank you for watching my video

[@alexisrodriguez4500]

ty got the same ones

[@alexisrodriguez4500]

how do u take out the mealt brackets .

[@JimmieFayeHolcomb]

Do you sale rider auto fold scooters

[@VirberelloScooterTips]

Hello Jimmie no I don't sell them but I buy all my products on Amazon check this amzn.to/3IXUaLN for on 749 dollars and free shipping with 5 stars not bad for the price

[@UncleHoCM]

👍

[@jalalmaache573]

Please help. I have same scooter as yours.the problem I have all lights working except the headlight. Both are not working. Please help.

[@VirberelloScooterTips]

Hello Jalal you need to follow the wires and the connections and make sure you do not have any cuts in the wires or corrosion at wires plug connector will be great if you have multimeter to check if the stator is producing current on the yellow wire. I hope this can help you thank you for watching my video

[@jalalmaache573]

@@VirberelloScooterTips Thanks a million Please keep making gy6 videos You are helping do many people Thanks again

[@VirberelloScooterTips]

@@jalalmaache573 thank you for watching my video s and I'm very happy that I'm helping somebody that needs help from me be safe my friend

[@Muslims617]

Cant find them at all

[@bennieeastes5243]

Whey is my frant lights is not working please help

[@VirberelloScooterTips]

Hello Bennie you need to test your stator with a multimeter to make sure you getting good clear voltage on the yellow wire and follow that wire to the front of your scooter to make sure you do not have any cut wires somewhere

[@daquanmiller2836]

I want to install red led

[@VirberelloScooterTips]

Hello my friend the rear led light are great but they do not last long time because the quality is not there yet but soon we will get very cheap light at great prices . Thank you for watching my video

[@daquanmiller2836]

@@VirberelloScooterTips ok thanks but I want to change the front light headlights to the a red or green color do they sell bolts like that

[@spidervenom3341]

😂😂😂😂 'baby light'..

[@VirberelloScooterTips]

Thank you for watching my video

[@AgeofReason]

Stop talking so much about so-called legalities

[@VirberelloScooterTips]

Ah ah ah thank you for watching my video

[@AgeofReason]

@@VirberelloScooterTips your videos are excellent, just a little long winded sometimes. Absolutely great thoughts and showing how to do things though. I support you.

[@AgeofReason]

You actually do great shows. I just popped a LED light in place of the old lamp, and the spread and clarity is phenomenal, however my turn signals no longer flash. Let me know if your brain has any ideas.