5 Simple Chinese Scooter Tips

[@lyndastarwriter]

I changed my fuel line on my brand new scooter - the line became disconnected. So I replaced it w/ clear tubing and a stop valve, as you suggested. It took me all day, today, but I just got back from a neighborhood spin. Thank you....to the point, demo, explanation. You don't just stand there and talk, you teach very well.

[@VirberelloScooterTips]

Hello Lynda Thank you for watching my videos and have a great Sunday

[@s.f.morris7331]

lets not forget about that awesome accent he has. sometimes I like to watch just to hear his accent. lol puts me in a better mood.

[@melindastrydom6916]

You are the best scooter genius in the world thank you for helping us with our scooter issues thank you sir

[@VirberelloScooterTips]

Hello my friend It's my pleasure to help everyone and thank you for the genius ah ah ah

[@johndee3301]

"You're gonna have a little more brake... for the weekend." Love it.

[@VirberelloScooterTips]

Hello my friend thank you for watching my video

[@rockwithmoss1901]

The rear brake tip works, thanks.

[@VirberelloScooterTips]

Thank you for watching my video

[@DivergentDroid]

The spacer on the brake may give you a little more braking power when your brake shoes are worn but just like a car's brakes it will not extend the life of your brakes. Your brake shoes are going to ware at the same rate they normally do. Once they wear to a certain point no matter how much spacer you use, the brakes will become unsafe to use because you won't have enough brake shoe material to stop the bike.

[@miketyson1717]

I bet the ice helps starting not due to cooling the starter motor, but by engaging the automatic choke! I find my moped starts easy when I have a battery in it, kick start even, and without battery it's sometimes impossible, I believe it's due to the automatic choke being stuck on or stuck off and either flooding it or starving it before it starts.... I believe the auto choke is engaged by temperature, supposed to be enriched if it's cold and non enriched once hot, however I don't know if it's normally enriched or normally normal, or whether it needs electricity to change states.

[@VirberelloScooterTips]

Hello Mike thank you for watching my video

[@lamontappling9]

The 12 volt tip was so helpful...thanx Bro.

[@VirberelloScooterTips]

Glad it helped

[@thebeatfreakz4278]

Love the intros!! How How How How How~~~

[@VirberelloScooterTips]

Hello thank you for watching my video

[@buckets1907]

Hello , Any suggestions for a much brighter 12 v 10w bulb replacement for the stock GY6 turn signal bulb ?

[@VirberelloScooterTips]

Hello on my scooter I have this blinker light iBrightstar Newest 9-30V Super Bright Low Power 1157 2057 2357 7528 BAY15D LED Bulbs with Projector Replacement for Turn Signal Lights and Brake Lights, Amber Yellow amzn.to/3RNRVQx and they work great for the last 3 years check this video kzbin.info/www/bejne/eKjVhX6El8qpr8U

[@buckets1907]

I Appreciate the information !! Thank you

[@buckets1907]

Hello, I received the scooter bulb replacements you suggested and( wow ) they are much brighter than the stock . Thank you for the tip.

[@jaytapang3509]

THANKS BROTHER,I LEARNED ALOT ABOUT MOPED ,IM A BEGINNER IN THE MOPED WORLD,

[@VirberelloScooterTips]

Hello Jay thank you for watching my video and be safe

[@theharvey6664]

I love this guys positive energy

[@VirberelloScooterTips]

Thank you for watching my video and be safe my friend

[@theharvey6664]

@@VirberelloScooterTips you too

[@parentalpotentialintempo2116]

I have the same bike but mine is missing that black box inside the seat compartment. What is it and do i need to find one? Pls

[@VirberelloScooterTips]

The inside bucket www.scooterpartscatalog.com/box-assy-luggage-100-79.html but make sure to check all the dimension

[@troyholland3436]

How often u recommend changing ur gear oil? It’s been close to 1,000 miles since I’ve done my last gear change

[@VirberelloScooterTips]

Hello Troy The recommended frequency for changing gear oil on a 150cc gas scooter can vary depending on the manufacturer's specifications and the usage of the scooter. However, a general guideline is to change the gear oil every 2,000 to 3,000 miles or every 6 to 12 months, whichever comes first. Thank you for watching my video

[@troyholland3436]

@@VirberelloScooterTips ok and also is it true that these 150 mopeds only last up to 10,000 before dying ?

[@VirberelloScooterTips]

@@troyholland3436 ah ah ah yes is true 100 % few mounths ago my scooter turn 9999 and exactly at 10 k the motor went bad I had to replace the motor and now runs great

[@troyholland3436]

@@VirberelloScooterTips are you serious??? There’s no way it died exactly at 10,000

[@troyholland3436]

@@VirberelloScooterTips that makes no sense a motor doesn’t just die exactly at 10,000

[@MandolinAZlife]

Ok all new to me so no mean comments.. mine is black w rust so will that work on that? Also how do I make headlight brighter

[@VirberelloScooterTips]

Hello my friend the best way will be to clean your exhaust with the aluminum foil but if the rust went to deep you need to remove all the rust and spray with black heat resistant paint and for the light you have 2 choice replace your head lights with led but they will flicker at low rpm unless you have a 8 or 10 poll stator or choice number 2 is to add a pair of extra led lights on the front of your scooter connected to the battery with a fuse . Thank you for watching my video

[@karenrocha6361]

I think the chain just popped on my new 200cc scooter while my buddy was on the back. The engine revs fine it only has 200 miles on it, but it's not giving any juice to the wheel. What do u think?? Thank u

[@VirberelloScooterTips]

Hello my friend you need to open the cvt cover and for sure you need a new belt . Thank you for watching my video

[@trav-raider76Alpha]

Thank u.. Ur tips really shine.

[@VirberelloScooterTips]

Hello thank you for watching my video and being a part of my KZbin community. I appreciate your support and look forward to creating more content that you will enjoy.

[@andyproctor3588]

Really enjoyed your video man that was a good informative video thanks my South Florida friend waving my hand from a very rainy Gainesville👍

[@VirberelloScooterTips]

Hello my friend thank you for watching my video & be safe

[@johnduncan8070]

Question, my Benelli 150 doesn't idle anymore. And is hard to start do you have any idea what may be causing this?

[@VirberelloScooterTips]

Hello John There could be several reasons why your Benelli gas scooter is experiencing idle and starting issues. Here are a few possible causes: Carburetor issues: The carburetor may be clogged or dirty, preventing proper fuel flow. This can lead to a lean or rich fuel mixture, resulting in poor idle and starting problems. Cleaning or adjusting the carburetor may help resolve the issue. Fuel system problems: Check if there is sufficient fuel in the tank and that the fuel lines are clear. If the fuel filter is clogged, it may restrict fuel flow and affect idle and starting. Consider replacing the fuel filter if necessary. Spark plug issues: A worn-out or fouled spark plug can cause difficulties in starting the scooter. Inspect the spark plug for signs of damage or excessive carbon buildup and replace it if needed. Air filter blockage: A dirty or clogged air filter can restrict airflow, affecting the fuel-air mixture. Clean or replace the air filter to ensure proper air intake. Ignition system malfunction: A faulty ignition coil, spark plug wire, or CDI unit can lead to starting problems. Inspect these components for any visible damage and consider testing or replacing them if necessary. Engine compression: Low compression in the engine can make it harder to start and maintain idle. It could be due to worn piston rings or cylinder head gasket issues. A professional mechanic can perform a compression test to identify and address the problem. Vacuum leaks: Check for any loose or damaged vacuum hoses that may be causing air leaks. Unmetered air entering the system can affect the fuel-air mixture and lead to poor idle and starting performance. Thank you for watching my video

[@anthonytoler3916]

Awsome guy!always have good video's

[@VirberelloScooterTips]

Thank you for watching my video

[@dennisw667]

I had my Wifes scooter lowered so she coulfd ride it. The place I bought went out of business and she never rides it. I would like to ride it but it is too low , how do I raise the rear suspension? Any instructions?

[@VirberelloScooterTips]

Hello my friend some suspension get shorter by twisting the lower part and some suspension need more gas inside

[@maikolberryte3588]

Such a funny guy. In a good way. Thanks man

[@VirberelloScooterTips]

Hello my friend thank you for watching my video and be safe

[@Visionofgodrecords]

Instead of coke and foil Just use a brillo pad or any steel wool... just be careful not to scratch it

[@VirberelloScooterTips]

Great idea thank you 🙏

[@budski1366]

What part of of Florida I would like to bring my bike over

[@beretta413brandnewrechordz2]

Great video I need help with my odometer on a oahu 2022 49cc xpro

[@buckets1907]

V. Thanks for the response tip for replacing the Stator in my GY6. THANK YOU.

[@VirberelloScooterTips]

Hello my friend you very welcome and thank you for watching my videos

[@hogg1media627]

I have a Chinese scooter 150cc and my exhaust pipe has a vacume hose up to a canister/filter I noticed it was disconnected today. I put an hose extension and it won't start. Any help?

[@VirberelloScooterTips]

Hello the pipe with a vacume is for recirculating egr system but that should not be the problem because the scooter is not starting could be several reasons why your gas scooter is not starting. Here are some common reasons: Empty fuel tank: Check to make sure that there is enough fuel in the tank. If the tank is empty, fill it up and try starting the scooter again. Faulty spark plug: A faulty spark plug can prevent the engine from starting. Check the spark plug to see if it is dirty, corroded or worn out. If so, replace it with a new one. Dead battery: If your gas scooter has an electric starter, a dead battery could be the reason why it won't start. Try jump-starting the battery or replacing it with a new one. Clogged air filter: A clogged air filter can restrict air flow to the engine, causing it to not start. Check the air filter and clean or replace it if necessary. Dirty carburetor: A dirty carburetor can also prevent the engine from starting. Try cleaning the carburetor or taking it to a professional mechanic to get it cleaned. Faulty ignition switch: If the ignition switch is faulty, it may not send the signal to start the engine. Try turning the key to the "on" position and jiggling it around to see if it starts the engine. Stuck starter motor: If the starter motor is stuck, it may prevent the engine from starting. Try tapping the starter motor gently with a hammer to see if it frees it up. Thank you for watching my video

[@hogg1media627]

@@VirberelloScooterTips thank you!!!! I checked my spark plug and it has NOT SPARK. drained the carb in case of flooding. Drained acces gas from carb. I put a new spark plug and not spark. Next I will change out the Ignition coil. If that doesn't work. I'll go off your list. If it does, that you for your help

[@VirberelloScooterTips]

@@hogg1media627If you have installed a new spark plug and are not seeing any spark, there could be a few potential issues. Here are some steps you can take to troubleshoot the problem: Check the spark plug wire: Make sure the spark plug wire is properly connected to the spark plug and the ignition coil. If it is loose or disconnected, the electrical current will not be able to travel to the spark plug. Inspect the ignition coil: The ignition coil is responsible for producing the electrical charge that creates the spark. Check the coil for any signs of damage or wear, such as cracks or breaks in the casing. If the coil is damaged, it may need to be replaced. Inspect the spark plug: Even if the spark plug is new, it could be faulty or damaged. Check the electrode and porcelain insulator for signs of wear, such as cracking or discoloration. If the spark plug is damaged, it may need to be replaced also inspect the inside of the spark plug boot there is a ceramic resistor that can brake with time

[@hogg1media627]

@@VirberelloScooterTips Thank you very much!!!

[@vnonkwinn6233]

That exhaust cleaning trick is going to create Ants bugs and flys. Not to mention lizards.

[@VirberelloScooterTips]

The Ants will died with cancer because I open diet coke ah ah ah

[@rockwithmoss1901]

U can use diet coke it works the same

[@Comedybrand]

Good video thank you!

[@VirberelloScooterTips]

Hello my friend thank you for watching my video

[@markusdecimus4732]

Very informative. Thx bro.

[@VirberelloScooterTips]

Glad it was helpful!

[@buckets1907]

V. ANY SUGGESTIONS ! I PURCHASED A NEW GY6 150CC ZNEN CHINEESE SCOOT ON LINE FROM DEALER IN CALIF. ( SAFER WAREHOUSE ). FROM FIRST RIDE AND FIRST TIME AND EVERY TIME I RIDE IT, AFTER ABOUT 5- 10 MILES THE ENGINE STARTS TO BOGG DOWN THEN SHUTS DOWN COMPLETELY. AFTER A FEW SECONDS IT WILL START UP AGAIN AND RUN FOR A FEW MORE MILES THEN DOES SAME. ANY SUGGESTIONS ? NOTE ITS NOT A GOOD IDEA TO BUY ON LINE.

[@VirberelloScooterTips]

Hello my friend that sound like a bad stator the copper wires when they get hot they expand and disconnect and when they cool down they make contact again so try to call the company and tell them that they send a scooter with a bad stator kzbin.info/www/bejne/p5CqqKKPopmfb68 the part is not to expensive but you need a little time to change it amzn.to/2TdcCtu

[@buckets1907]

V. Thank you for the tip on a bad stator.

[@Jordanvlogs315]

I broke my mirror you have any in mind that will work with my 49 cc

[@VirberelloScooterTips]

Hello my friend this mirrors on Amazon looks great amzn.to/4cKb38R

[@Jordanvlogs315]

@@VirberelloScooterTips will it fit in the existing ones holes

[@jonas6724]

could also put the garbage bag around the seat when it rains to keep it dry and preserve it

[@VirberelloScooterTips]

Great Idea thank you Jonas

[@jonas6724]

@@VirberelloScooterTips Thank you for your videos! Glad I found your channel

[@damianrivera5103]

@@VirberelloScooterTips I have a question my 150cc moped is making like a rattling noise somewhere around the cooling fan but it sounds it’s coming from the inside ???? When I start my moped

[@rapid1014]

I have a 125cc python from direct bikes but can find a new eaxuast system sm1 help

[@VirberelloScooterTips]

Hello my friend best thing to do is to call parts for scooters dot com or check on ebay

[@joelshiny3070]

Your videos are amazing 😉 mate I swear bro from UK 🇬🇧 thank you

[@VirberelloScooterTips]

Hello Joel thank you for watching my videos

[@jessticleez]

I have a scooter that I can't find much info about. 49cc. Id live if you could walk me through a couple things

[@VirberelloScooterTips]

Hello Jesse try to join Chinese Project Scooters on facebook there you can find lots of expert members on 49cc and you can post video of your scooter I have more knowledge on 150cc but if you have a problem I can try but I'm not sure 100% of the result on a 49cc ah ah ah Thank you for watching my video

[@jessticleez]

@@VirberelloScooterTips thank you sir. Your vids are super helpful and im learning a lot.

[@jessticleez]

@@VirberelloScooterTips i think i found it. Its some knockoff but basically its a clone of a keeway hurrican 50cc. Idk if that helps. But the way the frame sits makes it sorta hard to work around. But i am learning more every day

[@Jordanvlogs315]

My scooter feel over when I got off will it be fine

[@VirberelloScooterTips]

Yes should be ok just make an inspection to make sure nothing broke

[@Jordanvlogs315]

@@VirberelloScooterTips feel in grass tho ir seem to be good

[@servantoftheservant5022]

Hi Virberello me south africa my 150cc zapp scooter as soon as i reach 60km per hour it starts to shudder or jerk ..2mths ago i stripped carburator and cleaned.. new spark plug. filter clean.new belt rollers was going fine untill now only thing i haven changed is the petcock help please..

[@VirberelloScooterTips]

Hello my friend that could be the sparkplug boot that is a little loose because at high speed you have more vibrations or the wire in the back side of the sparplug coil ar not to tight . Thank you for watching my video

[@servantoftheservant5022]

@@VirberelloScooterTips thank u so much for your quick reply its 20hh in Johannesburg im a practicing monk going to sleep have to rise at 2am will definitely try tomorrow cant wait thanks again 🙏🙏

[@servantoftheservant5022]

Hi Virberello it was the spark plug boot thank u ..there was a small clip on spark plug but cant get that clip inside boot so will have to buy another boot which i replaced 2month ago there is a lot of these small road breakers which vibrates the scooter a lot thanks southafrica ..

[@davidhawes9423]

I have vit acci spark 150" put new muffler on, it burned holes in head pipe on 2 days?? The bike did! Lol, help!?

[@VirberelloScooterTips]

Hello David in 2 days thats crazy you can bring the pipe to a professional welder but this is not normal

[@davidhawes9423]

Thanks! Yur fast! I knew not normal! Its just running to rich!" But, its got power! Keep the videos coming!! Yur @wesome!

[@thedealmakergogoba8087]

Love yr tips, thanks buddy!

[@VirberelloScooterTips]

Hello my friend Thank you for watching my video and be safe

[@vnonkwinn6233]

Why does my gy6 stall at every stop? Then it takes an hour to start again.

[@VirberelloScooterTips]

Hello my friend you need to check your valve clearance or check compression on the motor . Thank you for watching my video

[@aquariusreneanderson]

I love this video! Great job! 😁

[@VirberelloScooterTips]

Hello Rene thank you for watching my video

[@aquariusreneanderson]

@@VirberelloScooterTips Youre welcome 😁

[@natashavillagrana]

We just bought a yamati strada rx150 and have some questions. We cant find anything on it. Do ypu think you can help us?

[@VirberelloScooterTips]

Hello Natasha Villagrana if your scooter looks very similar to the one I have and is a GY6 motor there is a high possibility that I can help you so feel free to contact me at any time for your questions

[@natashavillagrana]

@@VirberelloScooterTips I think it is the same motor. Do you have an email address and I can send you pictures to make sure first. This is our first scooter so we are rookies 😂

[@VirberelloScooterTips]

@@natashavillagrana yes Virberellogameon at gmail com but let me know when you send me something because I do not check my emails anymore

[@ruddyrabe]

We all need dat Virberello energy in da morning :D

[@VirberelloScooterTips]

Hello Oikake thank you for watching my video

[@deezy128]

What is that exhaust? Sounds nice bro

[@VirberelloScooterTips]

Hello my friend Performance Racing Exhaust Muffler Pipe For GY6 amzn.to/35pcEE5 the muffler is cool but the sound was not my favorite

[@deezy128]

@@VirberelloScooterTips I just don't want my scooter to sound like a hairdryer, but more of a Muffled bassy sound if you know what I mean

[@floris906]

Good video friend. Do you think a 80cc kit for gy6 from AliExpress is good?

[@VirberelloScooterTips]

Hello Floris if you like a good product buy Taida

[@Davidsmith-tj5st]

HOLA PA! Been watching & wor king on my scooter a lot 50cc-49cc with big bore ...i have question...how many scooters do u have? ¿ I'm also in South FL on west coast

[@rjuarez4913]

Remember if you use a spacer or nut for your brake adjuster , you won’t have the curve to keep your nut from falling off!

[@VirberelloScooterTips]

Hello Juarez my nut is been there for 3 years and is not moving my friend plus the nut is not round and does not allow the curve of the oem nut to turn . Thank you for watching my video and be safe

[@WalterKnox]

good video: just have to use that foil when my wife is not home or she would have a fit.

[@VirberelloScooterTips]

Hello Walter yes you are right I do the same thing I 'm aloud to take that foil when my Boss is not home ah ah ah thank you for watching my video and be safe

[@jodym3005]

How do I know if my shocks are bad ?

[@VirberelloScooterTips]

Hello Jody look at the center part of the shocks and make sure you don't see to much grease because when shocks seals / gasket are bad they leak oil fluid and the shocks do not not go up and down very easily

[@jodym3005]

@@VirberelloScooterTips thank you very much And I wanted to see you do a great job on your KZbin page

[@onesky9003]

Does it have to be Diet Coke?

[@VirberelloScooterTips]

Hello my friend regular coke is just that diet is my favorite. thank you for watching my video

[@williamlagi9871]

That helpfully bro😀

[@VirberelloScooterTips]

Hello William thank you for watching my video

[@Akzel_]

i love you bro

[@VirberelloScooterTips]

Hello thank you for watching my video and be safe

[@marineboy4181]

Hey bro you somewhat know a lot about bikes. What type of formats will I get out of my GY6 93 CC TaoTao scooter if I swap out the OEM bearings in my CVT I did the whole swap in my cvt except the bearings and what type of performance will I get out of swapping out my OEM bushings.? And do I need to swap out my crankshaft since it's not a 49cc no more the mechanic that I talked to said I don't he doesn't know what the heck he's talking about

[@matthewchristian9830]

Nice one

[@VirberelloScooterTips]

Thank you for watching my video

[@demetriusrobinson5372]

To add 12 volt charger on my scooter.

[@augiebuttinelli7662]

😎

[@VirberelloScooterTips]

Hello thank you for watching my video

[@consciouslystupid-rq7pe]

Wife’s kitchen ! Lol

[@gilabola4642]

you should add "never drink coke" to the title

[@geraldscott4302]

Hilarious

[@VirberelloScooterTips]

Hello my friend thank you for watching my video

[@dylanscott3874]

borat vibes

[@VirberelloScooterTips]

I love Borat ah ah ah