Chinese Scooter mods

[@Spitfireseven]

Your overall command of the subject is as good as anybody could ever have. Nobody could explain it better. Giving the the overall reasons why it is silly to try and push this too far is the wisdom many afficianados fail to appreciate. To many people try to push the fifty cc like it was a Kawasaki 750. This 150 has those identical limitations because it is just bigger and less limited. It is still a CVT unit and really great for being that person about town. It is not designed for Lemans and never will be. You really held that sentiment. It was a pleasure to watch your video.

[@VirberelloScooterTips]

Thank you for watching my video

[@johnlovell1035]

My bike has a chain drive, did I have a belt for the transmission under the cover on the left side? Also I've changed out carburetor, the air/fuel screw is set at 3½ turns out.

[@cityofjoy2576]

You saved me over $400 in fixing Mt scooter... I found out the guy nebs scooter mechanic was ripping me off... Thanks soooo much bro....

[@VirberelloScooterTips]

Hello my friend I'm very happy I save you money and thank you for watching my video

[@ahmedkaram2470]

Perfect !! What the job of hose that comes from cover of head cylinder to air filter!???

[@VirberelloScooterTips]

Hello my friend for the hose that comes from the head I have a catch can

[@ahmedkaram2470]

@@VirberelloScooterTips So Sorry, I can't get you !!😂😂

[@GY6-SCOOTERS]

@@ahmedkaram2470 that hose that comes from the tip of the valve cover to the airbox is a engine breather hose sometimes oil will come out from it along with vapors and pressure if your ending up with oil in your airbox you can purchase this oil catch device that this guy who makes these videos was trying to tell you but you quite didn't understand..? I had a problem with this vent hose so after researching watching one of his videos on this channel I decided to purchase the oil separator catch you plug the vent hose from your valve cover to one side any fluids will no longer be going into your airbox but into this little catch bottle if your interested in watching a video on this just type in vent hose oil catch you'll see that this man on this very channel had two detailed how to videos on how to reroute your vent hose into this great device that is sold on Amazon for for under $20.00 ok !🙂👍

[@MrJUNE224]

This man has a heart of Gold, He take time from his life to teach us how to fix are Scooter. If you feel about him like I do all you have to do is show it, Donate $2.00 where it said Thanks. I did it the first day and it was worth it cause he show me how to install a throttle Cable. He save me lot of money and time.(( SHOW HIM YOUR APPRECIATION HIT THE THANK )). I DID!! !MR VIRBERELLO make some T-Shirt. I buy a XL.

[@VirberelloScooterTips]

Hello my friend thank you so much for taking the time to watch my video! Your support and engagement mean a lot to me and the tshirt idea sound good I need to work on that

[@pedroleger5961]

Nice video I like it 1 quick question I have a 200cc efi scooter Chinese but its fuel injection how can I work on that fuel injection to make it go faster? exhaust

[@VirberelloScooterTips]

Hello personally I will not touch the efi system because is very delicate and losing the balance of the fuel your scooter will bug down but personally if I was you I will replace the roller weight at the variator and will switch to 19 grams weight and that will make a big difference on your top speed but remember to ride smart and be safe with your scooter

[@pedroleger5961]

@@VirberelloScooterTips thank you will do

[@melindastrydom6916]

Hello my super helpful friend im back again I've got a 150cc gy6 scooter with 10g rollers and 1500rpm clutch spring with a cone filter and performance exhaust.i was wondering what will be better to put next will it be a big bore kit or a performance carburetor thank you for all your help

[@VirberelloScooterTips]

Hello my friend I will buy a performance carburetor before upgrading to a big bore sometimes by changing the carburetor you can get to a good level of performance but don’t forget on the gy6 we have a little problem on space for a 30mm so you can get a 28mm with larger jet according to your altitude

[@melindastrydom6916]

@@VirberelloScooterTips thanks your the best i always follow exactly what you say

[@markospina575]

My moped is 50cc and only idles when the fuel screw not idle screw you know the one on the side i turn all the way in and only half a turn out and that is the only way I can have the idle screw very low even if I adjust it will rev alittle higher but no wheel spin and maybe sometimes die out. Valves just adjusted perfectly believe me I don’t thinks it’s vacuum leak changed the cdi and spark and coil plug, if I turn the fuel screw two turns out from tight the idle screw had to be all the way down for it too run.. lmk what you think

[@markospina575]

I also changed the fuel Petcock and all fuel filters

[@markospina575]

And when I do get it to go it will work fine then 3 min later start to bog out and only hit 15 mph but that was before the valve adjustment so I’m not sure

[@markospina575]

I just don’t wanna run the bike to lean or rich HELP

[@VirberelloScooterTips]

Hello Mark wow you did a lots of things on your scooter not sure what is the problem try to inspect or change the carburetor jets to see if you have improvement keeping in mind the altitude of your location that what comes to my mind at the moment and also join chinese project scooters on FB there you can post your question and you will find lots of great members. Thank you for watching my video

[@chantakzee]

You should have the coil in hand because GY6 chinese scooters are known for cheapening out on the spark plug coil and the starter switch. Switch it out beforehand to have peace of mind.

[@skitsafonic8510]

Hi, any chance you could advise me on a problem I have with my direct bikes 125cc cobra scooter? The issue I have is when riding my headlights flicker on and off. I have rewired and put new conectors on the wires but they've continued to flash on and off at different intervals. It's causing a problem when riding at night, as cars think I'm flashing at them and I've nearly had several close accidents. Hope you can help or anyone can help?

[@VirberelloScooterTips]

Hello SKITSAFONIC I will personally try to check all the headlight wire with the multimeter and every time you check one wire point I will shake the scooter to see if something change in the multimeter reading also try to check the light bulb tungsten filament to make sure is not broken or almost burnt also make sure the bulb is not loose and fixed well in the socket and make sure the socket is not contaminated with oxide corrosion and for last I will open the stator and will clean the head only the head of the stator bobina poles with fine sandpaper and when you are there clean the inside of the flywheel with sandpaper and after clean with dry cloth. I hope this can help my friend be safe and thank you for watching my video

[@cityofjoy2576]

This guy is ...Great... good info.. and even msgs you back with questions

[@VirberelloScooterTips]

Hello my friend thank you for watching my video and have a great holiday season

[@nobadvibes4186]

Well all these links work for my roketa 150cc?? I’m still getting vibration only when initially throttle

[@VirberelloScooterTips]

Hello No Bad Vibes yes Roketa have a gy6 150cc motor so all the links are good for Rocketa for the vibration did you check your roller weight to make sure they are not damaged because some vibration can come from there . Thank you for watching my video

[@nobadvibes4186]

virberello GY6 Scooter Tips thank you for the quick reply. No I have not yet, but that’s a good point. I feel it mostly in my seat. I will order the smaller weights and will look if I have any damage. Also, can you post what tools are needed ? As well my cap fell off from the box !

[@nobadvibes4186]

virberello GY6 Scooter Tips my NCY transmission kit just came in! Performance clutch , 10gm rollers , 1000 coil spring ,new variator, and a new clutch cover, new belt. :)! Wish me luck !

[@topcat15191961]

How do tell if your gy6 is a long case or short case ?

[@VirberelloScooterTips]

Determining whether your GY6 engine is a long case or short case is relatively straightforward. The case length refers to the physical size of the engine's crankcase, which houses the transmission and other internal components. Here's how you can identify the case length: Measure the distance between the center of the rear wheel axle and the center of the front wheel axle of your scooter or motorcycle. This measurement is commonly referred to as the "wheelbase." Long case GY6 engines typically have a wheelbase of around 49 to 51 inches (124 to 130 cm). Short case GY6 engines usually have a wheelbase of about 43 to 47 inches (109 to 119 cm). Keep in mind that the wheelbase measurement is not an exact science, and there may be some variation depending on the make and model of your scooter or motorcycle. In some cases, the engine case length may be listed in the owner's manual or specifications of your vehicle. Another way to identify the case length is by referencing the vehicle's model number or VIN (Vehicle Identification Number) and cross-referencing it with the manufacturer's information or online resources specific to your scooter or motorcycle model. Thank you for watching my video

[@06kauaiboy]

Just subscribed to your channel. I’m really getting into scooters myself. I’ve got a 50cc gy6 and really to update my exhaust and intake would the parts in your recommendation fit on mines. Thank you

[@VirberelloScooterTips]

Hello my friend Welcome aboard! just shop on line for 50cc gy6 exhaust amzn.to/2XbiMIl they have a smaller flange connections my scooter is a 150cc with a larger flange. thank you for watching my video and be safe

[@GY6-SCOOTERS]

Hello my friend I like watching all your videos !🙂👍I need your help I purchased a brand new icebear Hawkeye 150cc scooter when it arrived I noticed lots of oil soaked into the cardboard box once I opened the box and uncovered all the bubble wrap I noticed oil coming out from the tip of the seat to the floorboard to the front of the scooter I wiped it all away clean after assembling the scooter I noticed a big problem during my first test ride the scooter would not go past 30 mph come to find out the airbox was filled with oil I washed the filters with warm soap water and let it dry out good is there anything else I should do ? I did watch your video about installing a oil catch I purchased one on Amazon it will be delivered tomorrow morning I sure can use any advice you might have for me ? Thanks amigo

[@VirberelloScooterTips]

Hello my friend after the oil goes on the filter you will need to buy a new filter because those filter are not to good after you wash them they work ok but they do not perform great because the oil came from the breather hose at the valve cover make sure the lower part of the air box has no oil and is clean after place your scooter on the center stand and make sure is level to the ground at that point check your oil level because there is a possibility that from the factory they over fill your scooter with oil if not the scooter will send with motor pressure oil back again at the filter after try to remove the air hose behind the carburator and make sure the inside of the hose or the back side of tha carburator is not oily because if some oil went inside the carburator at the moment oil by force of gravity will be in the Carb bowl and will seat there for few miles and will effect the performance of the scooter unless you clean the carburator . Thank you for watching my video and fel free to contact me anytime be safe my friend

[@GY6-SCOOTERS]

@@VirberelloScooterTips thank you so much for your great advice I really appreciate your time in helping me out I'll definitely replace the filter and I'll install a new carburetor I will also make sure to drain and refill the oil at the correct level I should receive the oil separator tomorrow along with the lil pod filter as you shown in one of your videos I plan on rerouting the vent hose to it instead of to the airbox!🙂👍 I learn so much from watching your videos thanks for everything my friend have a great day k

[@herrwingnut]

Every time you create a video, I have something new to do on my scoot....which is perfect in these times of social isolation 😀

[@VirberelloScooterTips]

Hello my friend Thank you for watching my video

[@aski1529]

I need better exhaust but i dont want it to be too loud

[@VirberelloScooterTips]

The stock exhaust is better and last long time the rest are not good quality

[@ashiemflowers8119]

Are you local I would like if you could come through to help me change my spring an jets.

[@VirberelloScooterTips]

Hello Ashiem Flowers I'm from WPB in FL are you from around here ?

[@zulutribe48]

Love what your doing..I've really learned a lot

[@VirberelloScooterTips]

Hello my friend thank you for watching my video

[@carlosdavidfalconi599]

Unrelated question... can I use a bigger carb on the 150cc? I have one of those hammerhead gokarts and had a lot of issues speacially to keep it running. I bought a carb that said 150cc but its slightly bigger and has more ports to it. this is the one ... do you think I can make it work? www.ebay.com/itm/PERFORMANCE-GY6-Carburetor-30mm-GY6-150cc-250cc-Moped-scooter-KF-Carb-Carburetor/251760067407?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

[@VirberelloScooterTips]

Hello Carlos the best carb for a 150cc is a 26mm or a max is a 28mm this 2 are great for any altitude if you leave at higher altitude in the mountains above 3000 ft you can place a 30mm where the air have less density or if you change the top end of your scooter to a 171cc boar kit you will need for sure a 30mm because you will have more room for air inside the cylinder . Thank you for watching my video and be safe

[@cityofjoy2576]

Thanks for the info.....

[@just4kicks950]

All good point's my friend! We know what the deal is at 60 to 75mph ! different on Chinese steals LOL. What a lot of peeps talk about the frame breaking apart & the long case crack's in hafe at 70 . Just becarful speedster's Salute my friend

[@VirberelloScooterTips]

Hello my friend Thank you for watching my video

[@just4kicks950]

@@VirberelloScooterTips I've got to ask ! Can't get a decent CDI even seemst o be a mystery !tried,of the racing nother work ??

[@scottbaddley72]

@@just4kicks950 I would use this CDI NCY from amazon, dont use the cheap blue one if u have a big bore kit, it will mess the timing up www.amazon.com/NCY-Motorsports-High-Performance-Vento/dp/B008QZCDMO/ref=mp_s_a_1_4?dchild=1&keywords=ncy+cdi+and+coil+for+gy6+150&qid=1587265004&sr=8-4&swrs=DA081D6C19C4D698BF26713DAC5B50B1

[@floris906]

Good video friend

[@VirberelloScooterTips]

Thank you for watching my video

[@gamma_corvi]

Thanks Dude!

[@VirberelloScooterTips]

Hello my friend thank you for watching my video

[@alpharomeo5123]

Very helpful 👍 you very nice😎

[@VirberelloScooterTips]

Glad it was helpful! Thank you for watching my video

[@Catalysis1144]

Thanks this was helpful

[@VirberelloScooterTips]

Thank you for watching my video

[@islamayman5927]

Thank you sir very much for that video ❤️☺️

[@VirberelloScooterTips]

Hello my friend Thank you for watching my video

[@jordy-b-gaming6311]

Great video man

[@VirberelloScooterTips]

Thanks for watching my video

[@stefan6608]

Great video ... 😊

[@VirberelloScooterTips]

Thank you for watching my video

[@stefan6608]

@@VirberelloScooterTips my pleasure sir ... every time ..😊

[@scottbaddley72]

Great vid. I have all of the upgrades you mentioned plus more :D Do you have a suggestion for better shocks or how to reinforce the frame ?

[@VirberelloScooterTips]

Hello my friend for the frame you need to bring the scooter to a welder specialist and add more bars on the frame Thank you for watching my video

[@VirberelloScooterTips]

I forgot my favorite shock are this on amazon Mallofusa 13.7Inch 350mm Pair Rear Motorcycle Air Shock little expesive but they look cool amzn.to/2RLdy4j