My composit bed has held up better then any steel bed I've ever owned and I overload my tacoma two or three times a year with stone, coal and firewood. Sometimes's with more then a ton. One summer I hauled over 100 tons of stone. These are definitely unnecessary except perhaps where you install a camper shell or something similar.
@BOBBYdigital312 жыл бұрын
Just a quick suggestion for anyone doing this. I would recommend using a small brush and a bit of primer to touch up those drilled holes otherwise with moisture and condensation you could develop rust and rot over time. Or at the very least some urethane window sealer on the exposed metal. Not a problem for the short term but people pass these tacos down and could be helpful for future resale owners.
@fixittony2 жыл бұрын
Great point! I totally agree. I use POR-15 rust preventive and top coat combination.
@skytechenterprise99062 жыл бұрын
Or apply antisieze to threads and flange head of bolts, it will prevent rust forming as well.
@JuanManuel-fm9jt Жыл бұрын
No need
@ElevationEveryWeekend2 жыл бұрын
I should probably do these for when the rack and tent is on my bed! I like the extra mounts they provide, am a little concerned the bottom lip will impede sliding cargo in and out. Keep ‘em coming Chloe!!
@vcg2134 Жыл бұрын
You make all of the installs seem so easy. Last night I installed the decked drawer system on my 2022 Tacoma Off Road by myself. It wasn’t easy and it took me at least 6 hours. OMG my back is killing me. But the install came out great. Thanks Chole for the inspiration.
@russellwood87502 жыл бұрын
I’ve been watching your channel for quite a while and it’s nice to see some of the recommendations I made you’ve actually put on your truck feels good feels like I’m helping you even though I’m not actually there LOL. I did go with a different make and brand then you did I went with total chaos it’s not quite as boxy as yours and follows the lines of the bed and runs higher up the side walls of the box so little different than the one you selected.
@ChloeKuo2 жыл бұрын
Thanks for all of your recommendations!
@fixittony2 жыл бұрын
Thank you Chloe, you are making my decision to buy a Tacoma easier.
@thomasoverton71312 жыл бұрын
Great video Chloe. Definitely getting some for my Tacoma build. Thanks for sharing 👍
@jonnewbury34822 жыл бұрын
I noticed a lot of bed side flex just using ratchet straps when hauling. I don’t plan on having a bed rack or a tent but will be installing bed stiffeners.
@fiorisony2 жыл бұрын
If you are worried about the bed cracking from offroading I feel like those will actually make it more prone to cracking...
@alexgarcia39002 жыл бұрын
I have an access cab (probably more likely to crack since it's a long bed) and I also have a double cab short bed. I off road all the time on both with a bunch of gear and I've never had any issues. I live in Hawaii and everyone has a tacoma and I've never heard of them cracking.
@politerudeboi6898 Жыл бұрын
@@alexgarcia3900 same here got an access cab n im on the big island and the tacoma is the state bird lol flocks of them everywhere no one had a cracked bed from who i talked to. i however plan on getting loads of sand and rock from the quarry so maybe i might run into the issue
@Rpeices11 ай бұрын
So I have a set of these from my friends kids who run a fabrication / cnc shop from home. They are also powder coated and pretty much exactly the same. What I wanted to point out is on my 08 taco the top bolt is at the exact location of a piece of stiffening metal behind the tail lights. It was an absolute nightmare getting the nut on. One thing also to consider is putting a washer on each side of the bolt, I did this on mine and while probably not needed it should add some additional strength. Great Vid and I really like the deck system.
@EL_wardan11 ай бұрын
If you got them free, install. If you didn’t and you paid 100 for them boy do I have some oxygen to sell you.
@Rpeices11 ай бұрын
@@EL_wardan Mine were free since I did some work for them.
@allentolbert84042 жыл бұрын
Looking good CK another great video GBU And Family Always ❤ 🙏
@JasonExplainsThings2 жыл бұрын
Nice Chloe! I’ll be doing this as soon as I get my Tacoma… if it ever comes! When we added a spare tire carrier to my friends Colorado ZR2, that required bed stiffeners as well.
@dadgarage79662 жыл бұрын
When drilling new holes to line up with existing holes, use a transfer punch. They come in sets. It punches a centered drill point so there's no guessing. Also, it's almost 2022 and the whole world is metric. Why U.S.-based accessory manufacturers still include inch hardware with their products is puzzling. It's that difficult to include M10 fasteners with this kit?
@curtishoward55842 жыл бұрын
Well Miss Toyota, I will be starting the rebuild process on my Tacoma this week. I have all the parts I need other than a few small things I’ll have to get at dealer. I’ve got a 18 Denali duramax I gotta paint , soon as I finish it the yota is next in line. Bed stiffeners are good idea with composite bed. If I was gonna serious off roading I’d prolly go for it to. But I won’t be doing any real hard off roading. Maybe fishing and snowy roads is about all mine will see. Good job as always.
@julestrdprodjimavicpro28692 жыл бұрын
hmm bed stiffeners? when will the spending ever end? Taco Life$ 🤨 another cool video!
@bernielawson54992 жыл бұрын
Great video as usual!! I have these and will be installing soon. I have zero need for it but kinda live by the motto “over kill is my motto” so why not. Thanks
@eliteinventor2 жыл бұрын
This answered alot of questions, I always wondered what those were for
@FirebirdsWrestling42 жыл бұрын
Also you can get this same exact ones on Amazon for a lot cheaper. I have these exact ones and I didn’t go through Cali Raised.
@jerry9012 жыл бұрын
no link? c'mon man...
@Boobtube.2 жыл бұрын
Thanks Chloe. Those look really beefy. Not sure if you have a spring loaded center punch or not. If you don't, you might want to get one. they are cheap, and help you to center up a hole before drilling it. No hammer needed to hit them, cause the spring action gives the punch the juice it needs to make a starting mark for your drill bit. Again, thanks for what you do Chloe, your a real gem.
@ChloeKuo2 жыл бұрын
Agreed, that would be so useful! Adding that to my Christmas wish list 😁
@Boobtube.2 жыл бұрын
@@ChloeKuo Cool Beans :)
@sayeednmb2 жыл бұрын
Awesome. These are on my mod list
@jefferylorance79882 жыл бұрын
I enjoy the video…I also purchase a Cali Raised Bed stiffers..easy to install..I do have a 6 foot Leer camper…with so many aftermarket bed stiffers…it must be a needed MOD…Toyota Corp? Are you listening? Aloha
@kyebo17762 жыл бұрын
You should get one of those tailgate interior covers. They have them with drink holders built in also
@ChloeKuo2 жыл бұрын
I need one of those!
@kyebo17762 жыл бұрын
@@ChloeKuo yes, I know when I climb in it really is hard on the knees, or if you set something on the tailgate invariably it topples over! Looks like an easy install.
@danielangeles862 жыл бұрын
Makita, a reliable tool brand for a reliable truck
@ChloeKuo2 жыл бұрын
I agree!
@rastersplatter Жыл бұрын
Another great video. Just picked up a set.
@TheExpert7.622 жыл бұрын
Another pleasant video from Chloe! I wish you owned a 5th Gen 4Runner. BTW... You would think Cali Raised would provide metric hardware instead of SAE in these kits. Just curious.
@JonWolf-nf5cr Жыл бұрын
You forgot to include to torque the T55 star hex bolts. I believe it’s 50-60 ft-lbs and the T40 is 30ft-lb.
@kinanromman51972 жыл бұрын
Great video and very helpful. Wondering why toyota didn’t just make the bed strong enough from the factory?
@royportalise52692 жыл бұрын
Hi Chloe please bring back Land Cruiser with TRD Pro (Tacoma rims) and BFG K2O's!
@ChloeKuo2 жыл бұрын
KO2s (or KM3s) for sure! But I think I’m going with some Method wheels for that vehicle
@johnjohnson51162 жыл бұрын
Thank God I kept my first gen!
@ScottWilliams3232 жыл бұрын
another great video!
@maomaniarocks2 жыл бұрын
bed stiffeners was my first mod. went with total chaos. no paint for those holes you drilled?
@ChloeKuo2 жыл бұрын
I should go back and paint them
@billymcbilliam2 жыл бұрын
Hey Chloe! Could you please post the links to your bed mat and your all weather floor mats for the interior? I would really appreciate it!! Best, Alex
@itsdennis75 Жыл бұрын
@Chloe - if you look close, how come the product looks different from your video and the one from CaliRaisedLED?
@titaniummaster1532 Жыл бұрын
How about for a 22 power wagon?
@rayreyes24902 жыл бұрын
great video!
@antoniopacheco20342 жыл бұрын
Hi, Chloe i want to replace my headlights bulbs to LED for my low beams and high beams also fog LED bulbs. What do you recommend I should buy. LET ME KNOW THANKS.
@knolysjohnson72442 жыл бұрын
Let me know when they release this part to fit a 2022 Tacoma ;)
@thomasr75522 жыл бұрын
Do you know how strong the tie hooks are at the front bottom corners of the box? I’m sometimes a bit worried carrying my dirt bike on the truck and strapping it down. There is unite a bit of flex on a he hooks compared to my old truck. Not sure if there’s a reinforcement kit or just use large washers and longer bolts
@alexcloyd96202 жыл бұрын
Nice. Been thinking of this. Carpenter by trade and will be getting the decked system soon. Can the stiffeners be installed before the decked system? (I haven’t investigated how modular the deck system comes, so I am unsure on the order of installation for myself).
@ChloeKuo2 жыл бұрын
I think that’s possible, but it would be easier to do the DECKED first. I have an install video on the DECKED if you want to see what it involves!
@alexcloyd96202 жыл бұрын
@@ChloeKuo thanks- will do
@llrmo2 жыл бұрын
These look similar to the r4t ones, are they the same thing just with different branding?
@walkr79982 жыл бұрын
dang its already hard enough fitting hay bales in this short bed
@mildaudiophile38792 жыл бұрын
I wondering if this would help the truck with towing?
@cunawarit2 жыл бұрын
Now I'm wondering if the composite bed is one of the reasons for the lower payload rating of the Tacoma vs. Hilux. Tacoma is rated at 1540 lbs vs 2200 lbs.
@alexgarcia39002 жыл бұрын
I think it's mainly the suspension. American market is different. The tacoma leaf springs are actually super weak.
@cunawarit2 жыл бұрын
Ah ok! I'm guessing then that America's mid-size trucks ride better unloaded than world market ones? The new world market trucks are getting better at being comfortable (my 2021 rides very well), but they used to be super stiff unloaded!
@alexgarcia39002 жыл бұрын
@@cunawarit yeah I own one and it's designed more for off roading and articulation. Stiffer springs are better for heavy loads but limit articulation and make the ride less enjoyable. Americans are very demanding lol and also don't usually use midsize trucks for actual truck use. We use bigger trucks for that purpose.
@bjn982 жыл бұрын
Chloe did ur bed make noise (like a squeak) prior to this when it was flexed? If so, did the noise go away now?
@ChloeKuo2 жыл бұрын
Great to hear from you Brian! No, but I did have a squeaking issue on the passenger front end a few weeks ago because of a bushing that was very annoying
@bjn982 жыл бұрын
@@ChloeKuo hope u are well. Love the vids!
@billdean.x2 жыл бұрын
Could I put these over my bed rug ?
@stevepatterson22902 жыл бұрын
very nice good job
@markohd10752 жыл бұрын
Good Video. I did see you still have your bed side mounting racks. The racks where you can tie things to the side of your bed. Do you believe those also give you added structural support? I do not remember how those were mounted.
@ChloeKuo2 жыл бұрын
Thanks! If you’re referring to the molle panels, they do not provide any additional support. They are made of star board and are very light and flexible
@gero47082 жыл бұрын
Would these work with a bed extender?
@NateMaris2 жыл бұрын
Sweet! I’m sold
@chuckswayzee2 жыл бұрын
Should use some Loctite on the nuts
@savuthvann2 жыл бұрын
Do they get in the way when you try to pull out your drawers?
@ChloeKuo2 жыл бұрын
No
@thehandsomemikey2 жыл бұрын
Wait, they include SAE hardware with these? WTH?
@briangarity63362 жыл бұрын
The bottle opener part looks sharp AF!!! Don’t slice yourself on those!!!
@ChloeKuo2 жыл бұрын
Lol it’s sharp!!
@cjc05222 жыл бұрын
So basically you chose these over the total chaos because they gave them to you for a shout out and a discount code?
@davidbaron66472 жыл бұрын
nice
@muddyh2o2init442 жыл бұрын
Hey how about disclosing whether you purchased or were sent by the manufacturer the items you post. It will add more validity to your channel. You jump around so much when it comes to quality levels on the items you install. Some followers might not know better and take your word. The only decent thing to do 👍🏼
@ChloeKuo2 жыл бұрын
Thank you for the feedback! I should have done a better job clarifying that in this video. I was not paid in exchange for making this content and always disclose that information for other videos that I am. I specifically installed these bed stiffeners on my truck over other brands I researched for the reasons I explained in the video-although I was able to work with Cali Raised LED on the backend to make my own discount code for viewers
@Boobtube.2 жыл бұрын
I trust Chloe to give honest opinions no matter if she paid for the product or not. So far she has been fair and honest and I see no reason for that to change.
@EL_wardan11 ай бұрын
Lol always funny to come back to videos like this when the dummy’s got scammed into buying companies scraps.
@pimpinbass473610 ай бұрын
yr code doesn't work
@torchoffroad2 жыл бұрын
Great Video! We would love to do a collab with your channel. Let us know if you're interested!
@tommcl85482 жыл бұрын
👍👊
@scotw672 жыл бұрын
It would be nicer if Toyota actually made a strong, non flexy bed to begin with. A steel bed with a spray in liner is way better than the Tacoma plastic bed.
@Sal-vb4ur2 жыл бұрын
Can you translate your videos into Arabic please? ._.
@tomasapena2 жыл бұрын
🛻 👍
@ausencioariza43832 жыл бұрын
Not needed! Let’s see a bed that has flexed…ever actually seen one?
@jonkirkwood4692 жыл бұрын
My son-in-law followed me wheeling on some old fire roads. At our first stop, he and my daughter both commented on how much twist my truck had on uneven surfaces. I had nothing in the bed. It was not encouraging. But, I'm tired of buying things to make my Tacoma a truck.
@NoSpillsChills2 жыл бұрын
When you dropping that only fans tho😻
@jacoblarson2742 жыл бұрын
first
@barbecuetechtips60242 жыл бұрын
I don't see the point honestly. If you're that worried about the bed over time. Just get a flatbed.
@rp38232 жыл бұрын
Nice addition! … I’m now wondering how good are stock bump stops on your Taco? 🙄🛻
@ChloeKuo2 жыл бұрын
They don’t look too bad, but I would like to upgrade!