Can't Find Salt Level on Hayward Aqua Rite Salt System? Chlorine King Pool Service

[@medicalgastestingnathantyl3726]

I accidentally switched into metric mode and didn't know it. Called Hayward for help and got no help. Thank you! This fixed my problem.

[@ChlorineKingPoolService]

You’re very welcome! I’m glad it helped.

[@justinreynolds3935]

I get this same call a lot Also the 500 hr inspect cell light reminder that clears by holding the diagnostic button down. Easy $ I suppose. Even when I explain it most clients can't get it figured out and end up changing the cell type and screw everything up. This video is very helpful for them.

[@ChlorineKingPoolService]

Yea the inspect cell light freaks people out for some reason. Even after explaining it’s built into the system and doesn’t mean that something is wrong. 😑

[@mikeschmitz8355]

Perfect, I must've accidentally switched into metric mode when I opened the pool. This has totally saved me a real hassle!

[@ChlorineKingPoolService]

I'm glad it helped out Mike! Thanks for watching :)

[@dustintorres3195]

Finally fixed my problem with this device thanks to you. Much appreciated!

[@ChlorineKingPoolService]

You’re very welcome. I’m glad it helped.

[@Everythinglifehastooffer]

Thank you very much by mistake I've played with my system and change it by mistake and couldn't figure it out what was going on. thanks in a million. Its back to normal now

[@ChlorineKingPoolService]

I’m glad to hear that. Thanks for watching!

[@Buckoff9900]

Thank you so much it fricken worked now we can sleep better at night

[@hotstepper2006]

Nice. I put the reading to temp, and then moved the switch up and down once. Got me right back to where I needed. Thanks man!

[@ChlorineKingPoolService]

You're very welcome! Have a great day!

[@bosshawg401]

Wow, this just saved me from buying a new main board! Thank you!!

[@ChlorineKingPoolService]

You’re very welcome!

[@harryzak9054]

I finally was able to convert from metric after watching your video. Thank you

[@ChlorineKingPoolService]

I’m glad it was able to help you! Thanks for watching.

[@johnmccarter4595]

Thank you so much. Such a simple fix for an annoying problem!

[@GregPowell-zi4or]

My Circcupool controller was displaying HOT and water temp of 194, which I assume is max. I ordered a potentiometer kit for about $8 on amazon. I decided to prep for the potentiometer install by carefully cutting away the cable insulation and cutting the red and blue wires. I decided to check display with nothing connected, my potentiometer kit arrives tomorrow, and discovered the controller has a default of 82 degrees. Everything is functioning perfectly now, should I install the pot?

[@ChlorineKingPoolService]

If it seems to be working I would let it be.

[@paulcrescenti5581]

Dude. You and KZbin!

[@ChlorineKingPoolService]

Hahah. Thanks for watching.

[@davidrottman7303]

Dude I needed this. Thank you!

[@ChlorineKingPoolService]

You're very welcome. I'm glad it helped!

[@Cathy-zz1rw]

Wish I could hear it

[@ChlorineKingPoolService]

I know Cathy I’m sorry about that. It’s one of those videos that I wish I would have done differently. All you have to do is (very quickly) hit the diagnostic button once then flip the toggle from auto to superchlorinate and then back to auto. That should switch from metric to standard. Thanks for watching.

[@raw542]

Thank you somuch

[@frenchycanada]

My panel shows zero salt. Why is that? Water temp 83. Tried multiple resets....nothing works. Help.

[@ChlorineKingPoolService]

That more than likely means either the cell or board is faulty. How old is the system?

[@walkerbell2817]

SAME! Solution??? Assume the salt cell is bad

[@rblnk123]

Thank you so much for this video!!!!!

[@ChlorineKingPoolService]

You’re very welcome!

[@jmorrison6914]

what? Cant hear you over the pump!

[@UAPPAU]

Mystery solved. Thanks!

[@ChlorineKingPoolService]

You're welcome Chris. Thanks for watching!

[@pabblo6103]

Worked.

[@ChlorineKingPoolService]

I’m glad to hear it. Thank you for watching!

[@frankhirrill]

Audio is terrible

[@ChlorineKingPoolService]

It is. Thank you for the reminder! Happy new year!