MATHEWS PHASE 4 BOW BUILD

BEEREAL MERCH - beerealmerch.com
ULTRAVIEW - ultraviewarche...
SAVE 25% ON HUNTWISE - get.huntwise.c...
SAVE 10% ON MAGVIEW CODE: BEEREAL - magviewgear.com/
Check out my PODCAST - apple.co/3vyQ6JP
INSTAGRAM - / chrisbeereal
My CAMERA Gear:
My MAIN Camera - rb.gy/nzanez
My Favorite Mic - rb.gy/vbl1vn
My VLOG Lens - rb.gy/5pk6eg
Best DO-IT All Lens - rb.gy/klx2x5
Best Hunting Lens - rb.gy/wvwxan
Audio Recorder - rb.gy/5pklm2
Other Gear
Editing Laptop - rb.gy/jps8mn
Editing Software - rb.gy/pwwuo9
Best Action Cam - rb.gy/w302ih
Camera Case - rb.gy/ie3n8l
Best Beginner Camera to Film Hunts - rb.gy/j902od

[@GideonMatthews6109]

I just turned 15. I was workin hard and just bought a brand new phase 4. And just got a fast eddie xl sight and a qad rest and bridgelock stabalizer. I'm pumped and I love this video. This made me pumped right before I got my bow

[@jayceereff2093]

You should do a comparison between the v3x and the phase 4 with the same shrewd stabilizers on the phase 4. I think that would really show the difference between the limbs itself. Also it would show the difference between the new bridgelock stabilizers and a regular stabilizer setup. I’m excited to see more with the phase 4!!

[@Cpt-Pugwash14]

I shot them both extensively yesterday, there is absolutely no difference i found, i went with the V3X as its a more simple limb design so less prone to problems down the road.

[@Travis09kailee05]

Doesn’t get any better to sit back and watch you build and shoot a new Mathews! 🔥

[@shaneziegler2555]

I wonder what Chris would say if he wasn’t sponsored. I’m not knocking anyone but I’d like to hear cons along with the pros.

[@dinodude1690]

It would be a dream for me to have a bow like that. I already have my Mathew’s set up planned out for when I get older. I like that Mathew’s continues to make new things and talk with people in the community to see what we all want.

[@BadKarma.-]

Dont sell yourself short and pick a bow manufacturer before shooting, Im a fanboy for sure but you should shoot as many bows as you can at the shop to see what feels the best for you. All major companies are producing the same quality gear so its just down to what feels the best and shoots the best for you

[@Firefox-cr3jw]

@@BadKarma.- i would not say the quality is the same with every one. Mathews can be compared to Apple. While all are very good bows, you are absoultely paying for the brand aswell.

[@Getdownorlaydownbum]

Did your bow yet ?

[@GregorsOutdoors]

What impresses me is going for the lower right dot at 125 yards. That's confidence and accuracy magnified!

[@idahoman325]

I love everything about the history & story behind Matthews, with that said I'm so tired of the death by a hundred cuts (( extra added costs before you escape out of the shop )) but as everyone will state that's the way of everything nowadays.

[@Vintage-406]

This just in. Mathew’s has announced the new bow for 2024! The phase 4X!

[@chrisparker9886]

Yeah, it's only $2500! And the stabilizer's another $1000🤣

[@TheArrowsEdge]

I bet it's dead in the hand and super quiet. Do you think they make their ambassadors read off a teleprompter?

[@jimmiekaelin4804]

No, the new bow for 2024 is called the Phase 6, featuring 12 limbs.

[@strata862000]

Mathews are solid bows. Loved my vxr. I’ve been shooting Hoyt for a couple years now and I will give it to them that instead of coming up with new tech to have people spend $250, they come up with their little nub stabilizer and include it with the bow!

[@bwagner71]

Definitely worth the extra $500.00 that the Hoyt Flagship costs over the Mathews!!

[@strata862000]

@@bwagner71 didn’t know the Ventum cost $1799.

[@DB.KOOPER]

Yeah but then youre still shooting a Hoyt...

[@stephengatley8144]

What you pay for with the hoyt is some riser machining & tiny peen extension a $500aud premium. That's the difference between Torrex & Ventum. I shot the Ventum 33 & V3X 33 Mathews 🏆

[@muffinking313]

I been only watching your contect for a couple weeks now. It has been super helpful and gets me excited to eventually get my first bow.

[@BrandonM83]

I am absolutely in love with this bow. And the UV button release. Buttttery smooooth

[@jaysears06]

I like the stabilizer set up but $270 for a stabilizer is absolutely nuts. That's just for one. That's not even counting the rear stab and the mount lol. Wow

[@jackbuendgen389]

And I'd be willing to bet they will be all over the place at TAC

[@brandonpatterson5705]

1400$ that’s what nuts

[@brodiemizer519]

Always been a hoyt guy but I love release season for all brands. I appreciate the engineering behind all the new bows.

[@odysseybmxguy]

Hoyt guy here as well, albeit I almost bought a VXR this year! Mathews does feel great in the hand, but Hoyts just feel better personally! Release season is the best!

[@ICU2B4UDO]

I just bought a few days ago the Hoyt Ventum Pro 30...82#'s, 29" draw...The deadest and quietest bow I've ever shot...Even guys waiting around said the same thing...And it didn't cost $700 extra for a stabilizer and bridgelock system...Mathews will ALWAYS give you extra stuff for TONS of extra $$$...Imo, they're not worth it...

[@abegraber6504]

Hoyts are purified garbage

[@lanewillhite]

Great Video and breakdown, as usual. I'm definitely intrigued by the bow but like many, have some reservations about the durability of the limbs. It DOES certainly seem quieter, even in the vid, so I assume it's even more (or "less") noticeable in person. An easy test to maybe see what is doing the most vibration-dampening (new limbs vs bridgelock stabs)...would be to put your Shrewd stabs on the 'standard' mounts on your Phase4 and see how much, if any, vibration comes back. Keep up the great work.

[@dailyduo486]

Watching your videos taught me a lot about hunting and bow’s themselves. Keep up the good content.

[@ninjazxd]

Just spec'd it out on Mathews website and subtotal was $2,650 before tax. I will definitely keep the Halon.

[@Malaphisis]

+ a few hundred for arrows.

[@tsoffroad5834]

Me too lol 😆

[@dristonlouis]

Mathews day is the day I always look forward to, thanks for the video Chris.🤙🏽🐝

[@dansellhausen]

Love watching the build videos! Shop is coming along really nice

[@brettsundland1646]

Another great video. I would really love to do one of these builds with the phase 4 in the future when I can afford it because I’m only 15 😂. You have inspired me so much to get into bow hunting, and I have learned so much from your videos, thanks.

[@tehranvirus]

hey man u swedish?

[@jimmiekaelin4804]

With the Bridgelock stabilizer mount, Mathews created a solution in search of a problem that didn’t exist.

[@TheArrowsEdge]

Haha, truer words have never been spoken. Wow, they put the stabilizer in the center of the riser?! And then proceed to add a bolt to hold it in... and they even give you an offset system for the back bar?! Does this make sense to anyone?? 🤣🤣🤣

[@hootiesfilms6446]

Just a way to sell you some insanely expensive stabilizers. About 50% more than their stabilizers from last year which were already double the price of any other stabilizers on the market. I love this bow but where do they getting off making a stabilizer system like this.

[@jimmiekaelin4804]

@@hootiesfilms6446: I am a lifelong Mathews fan. I own a Drenalin, Vertix, V3X 33 and Phase 4 29. I love Mathews accessories in general, especially the Limb Legs and quick detach low-pro quiver. The Bridgelock stabilizers on the other hand, forget it. Costs aside, they just aren’t as good as what the aftermarket has to offer, in my opinion. And you don’t see the pros using them either.

[@aaronthomaspharmd8505]

Love this! You can tell it has a different sound and is quieter. One question is the down angle on your front stabilizer. With the bridge lock you give that up. Is it worth it??

[@ShadeTree_Certified]

I’d bet they’ll come out with a stabilizer that has that angle built in. Kinda disapppointed that you lose that adjustability, but I won’t be buying one anyway. Still love my v3😎

[@aaronthomaspharmd8505]

@@ShadeTree_Certified I had the V3 and sold it for the bridge lock technology. You can tell this bow is quieter too.

[@jackbuendgen389]

250$ for ONE STAB. I'd save the money and buy a normal stabilizer

[@KamilOwnz]

$250 per stabilizer and $200 for the bridgelock. Your setup here for JUST the stabilizers costs over $700, including tax. That's really hard to swallow... Who's idea was it to price stabilizers that high??

[@wesrobinson6781]

At least the quality is really good

[@davidsteiner6301]

No one is forcing you to use those ones. Still has the regular holes for normal stabilizers. Crazy how that works.

[@ApexPredatorOutdoors]

I think they did it because they knew people would buy it. Mathews' marketing team could sell Water to a drowning man...

[@skyheckler]

@@davidsteiner6301 so you think it's a good price point?

[@davidsteiner6301]

@@skyheckler I never said it was. All I stated was no one forced you to buy that. There are other options. As far as price, it depends on multiple factors. Your income, your disposable income, are you a serious hunter? Just the occasional hunter? I believe it’s a pretty high price in addition to the bow, but it’s not unaffordable.

[@l.i.archer5379]

My question is, if you re-served the center serving the same way to give the arrow a natural left-spin at the shot, are your arrows also fletched with left helical? A lot of archery shops and archers don't realize how important it is to fletch their arrows to spin the same way they leave the string. Personally, I make my strings with a natural right spin on the serving, so I always fletch with a right helical.

[@benfisher8863]

It’s nice too with those stabs is you can slide them in to fit in your bow case or if your hiking up into country so it’s not catching on anything. Simple and quick slide out and you’re ready to go

[@jacobbaugus6311]

Regarding re-serving for better nock fit... What size serving are you typically using? I think average is .020 for center serving, but I may be wrong. Are there certain materials that servings a made from that you feel are best for center serving vs end serving etc.? Thanks! Always enjoy the content!

[@wcwcgarner2717]

I love my v3x 29 in granite. I have the hamskea epsilon rest made for mathews. The bows have the same specs.

[@garrettheapy7254]

Use black KT athletic tape on the rest. Way better than the QAD felt and silent! I covered the rest fork and made a pice to sit on top of my shelf and it’s perfect. And has lasted 10x longer

[@Briguy933]

May use this for my Hamskea launcher. Stick well?

[@AJ-mw9um]

I do the same!

[@AJ-mw9um]

@@Briguy933 yes it should work

[@garrettheapy7254]

@@Briguy933 it sticks awesome!

[@Briguy933]

@@garrettheapy7254 thanks man, I just ordered some on Amazon

[@ronnieparker4393]

Would love to have a bow built by you Chris….Such awesome videography all around

[@williamfaulkner7065]

Love these build videos, great comparison between the two bows! Thanks for keeping up with the great content, your work is greatly appreciated by us all!

[@justinshaw5541]

Went and got my Phase 4 today. Had a concert to go to right after so getting up in the AM to sight it in.

[@garycoutu8759]

Looking forward to getting this full setup within the next two months

[@rodneyhanbaum697]

Super enjoy watching this build, great reviews between the two bows! Thank you !

[@aaronclay7003]

Awesome video. I have learned a lot watching your channel. Watching your channel is what turned me to shooting Mathews, I used to have terrible shooting form, and I learned my draw style from you and I have learned a lot about customizing bows and arrow builds. It would be a dream of mine to be able to get a new Mathews bow and to be able to do a bow build with you. Awesome reveal video. Thanks for the insightful content.

[@landenmoore5680]

I love watching him build the bows i wish I had a bow like that but I’m gonna gat one

[@s2perman]

I like it. New technology. Everything always expensive for these bows. Pay it once and take care of it, I tend to Keep mine for years. Good job Chris.

[@samgoral4]

Talks about how these integrate stabilizers eliminate screws and vibrations…..proceeds to put on more screws and brackets just to attach the stabilizers

[@ashesofamerica3753]

When are you going to come out with your Chris Bee 🐝 Stabilizer edition? I just bought my Mathews Phase 4 still waiting for the bow shop to adjust my rest so I haven’t even shot it yet, but I shot one of the other 4s they had there.

[@Gibsonlife573]

I would say set it at 13/16 like you said shoot a bearish after paper if you get a big tear turn the Knock First to make sure it ain't a bad Arrow then switch the top hats try it again try turning the knock again that's how I found a lot of them I'm going to tell you right now though I love this Channel and I love what you do and I'm so very proud of you buddy I like Matthews the TRX it was a very hard in between to choose in between it or the BowTech Reckoning I chose the Reckoning I shot three shots off that new SS 34 and had a bullet hole with a bear shaft that's because you could move that cam left to right on the line it is so very dead in the hand and will absolutely pound arrow for Arrow and 50 yards

[@Aatje21]

Man, i would love to have a shed like that... I know it's a LOOOOOT of time, effort and work that went into it... But seeing it all the way in europe, it looks freaking amazing!

[@fattboy121285]

First interested but just got the v3x so might have to wait

[@jwild5360]

Have been saying for year Mathews needs one more size addition to the top hats. They need a set that’s equal on both sides putting the cam in the dead middle of the limbs. I’ve seen many guys land right between 2 sets where they get a tail that changes like yours did.

[@TSNOutdoors]

Well… I really want to get a new bow but when I buy one I keep it for YEARS! I’m worried about the rubber rotting between the Limbs / wearing out. Just another thing to maintain.

[@southernbowhunter]

In that case, I’d say you can’t go wrong with the V3X. The bow is amazing. Still quiet. Holds really steady. And when I put the two piece lowpro quiver on, it actually made it quieter. I recently bought mine and it’s amazing. The new phase 4 is nice and all, but I’m not feeling a need to rush to my nearest bow shop to shoot it. I’ve very happy with my V3X 33

[@bigz5262]

Try the rx7

[@Dr10Jeeps]

Okay Chris, you've sold me. I'll be down next week so you can set up my two Hoyts and one Mathews bows for me. If only.

[@codyjones5535]

That’s some good felt work pal!!

[@timbow50]

Well, that’s about perfect! Wouldn’t except anything else would we? Good looking bow over all.

[@Ligganover69]

i’m a mathews fan, but dangit hoyt, and bow tech make so many different looks, and different bows made for different things. Mathews just has their flagship, target, and youth.

[@Kanddande]

I bought the z7 extreme, then the creedxs. Hated the creedxs. Stuck with my z7 until I bought a halon 6. Hated that bow too. Shot a triax and loved it but needed some tweaking. Own currently a vxr28, a v3 27”, and a v3x 29”. They all shoot exactly the same. I say all this to get to my point….. if you like the new small features then buy the new bow, it’s as simple as that.

[@codywhitaker800]

I think that back bracket would be a bit cumbersome, you have to make sure to put it in correctly. A regular bracket has a quick disconnect you put in, twist it tight, ready to go whereas this has to be put in almost like a sight bar

[@dieselslurper505]

Just curious, like what do you do with al your old bows. Do you just hang them on the wall and never touch them again or do they al get a different purpose. It feels like you have about 15 bows or more.

[@Bajablast_scuba_cat]

I know this video is older, but is there anyway to get a more detailed model/mount part list for this sight? Just got my phase 4 and this type of set up, especially the sight and ability to mount through the riser is exactly what I want. Any help is greatly appreciated!

[@williamwest831]

Can you explain a bit about maintenance and the longevity of a compound bow ? What needs to be replaced if there’s anything that does wear out or not ? I’m considering getting a compound bow and would like to know your thoughts . Cheers 🍻

[@livingadreamlife1428]

With respect to maintenance, there are a few things you should do. 1. Wax your strings 2. Keep bow dry 3. Do not dry fire the bow 4. Depending on your usage, change your strings when needed 5. Inspect your bow before and after shooting. Tighten any lose fittings. 6. Store your bow at room temperature when not in use. Anyway, my .02 cents.

[@TN_vigilance]

@@livingadreamlife1428pretty solid list I would just put do not dry fire as number 1 and in all caps 😂

[@caateyeddevils9228]

I hardly shoot archery anymore. But I still love your build videos. Nothing slaps like a tuned bow 👍🏼

[@gabrielacevedo4059]

Hey do you know what serving size you used? Gonna have to do the same thing! My 4mm nocks are to tight.

[@tightright7561]

What’s your arrow weight, type, length, build etc.? Would like a bow tech to explain what they are doing like you are. Haven’t had consistent “help” and with a $1500 toy I want it perfect.

[@josephgish2573]

The arrow rest smacking the riser makes more noise than the bow does. That's pretty badass.

[@awannabeprofisherman1248]

What type of serving material do you use for the center serving?

[@whitetailhabitatandhunting]

Thanks Chris! Great video! 👍

[@davidarrieta3995]

That is the absolute sickest setup I’ve ever seen.

[@jeremyscheel4857]

Would you recommend this bow for a beginner?

[@levilayher3642]

I just set up my hha virtus drop away. I have a bullet hole but the arrow is shorting way left compared to my whisker biscuit,should i take it into a shop?

[@chucknorrisbrah4141]

Lol Chris how in the world did you already get your hands on a phase 4 which just released today? You gotta have a Hella serious sponsorship with them. Thanks for the content and your thoughts of the bow for this coming year

[@qaundaledingle4151]

Looking forward to this for Christmas 😅

[@user-ti8vy2uw2m]

I'm kinda disappointed. I've been waiting to buy a new bow since my VXR but there hasn't been a reason to. This is yet again the same bow minus the limb gimmick. And to be honest the V3X sounded a touch quieter in this video

[@Pakman13]

Love it. Gotta have one!

[@dereksisson2133]

This bow is sick. I bet it shoots pure with the rubber in the limbs and the bridge lock stabilizer. I need to upgrade. Wish I could afford one like this. Keep up the videos. Always like watching.

[@TheRealPico]

Do you happen to know which Mathews switch weight mods are needed to adjust draw length to 29.5 inches?

[@blm148]

Chris. How come you choose a cable driver vs a limb driver rest?

[@meanstinkgarage3575]

saweet... ordered mine today

[@jeffpeyton4850]

Chris do you prefer to wrap the center serving by hand instead of using a jig?

[@shawnviratham9521]

It a solid shooting bow it’s definitely quiet got to shoot it at my part time job today

[@chasewalker7741]

I just got my stage 4 and I love it and mine on the crono hit 319 on 70 pounds

[@IV3ECTZ_YT]

I might have to get this for Christmas 😅

[@gilberttobias4533]

I started off with Hoyt so I’ve always been the Hoyt guy. Well…….. I bought a phase 4 yesterday 😂😂

[@briandicristoforo7383]

Great video Chris! Love watching you content… perhaps it’s time to upgrade from my Tactic. Thanks for all the great info! Merry Christmas to dad this year 😂

[@guillaumecrepeault2090]

What do you think of the bear g2 cruzer as a beginner bow?

[@PNW_MXvideos]

Does the bee real grip fit on a mission hammr? I don’t want to order one for it to not fit, so thanks and I love your videos so much

[@markgunnell2149]

Thank you, job well done

[@PatriotPopp19]

Anyone know where I can find a used 65# RH V3 29? I’ve been trying to get one since they came out and I just never be able afford a new one . I don’t even care how beat up it up as long as it’s safe not broke and shoots straight.. I’m dealing with a lot of medical problems past few years and I just need something like shooting that I can focus on.

[@michaelalvarez9832]

Every year I’m here to watch the new Mathews drop. I got the v3 when it came out because of this vid. Now maybe the phase 4!

[@thenatorbator2197]

Love the bow builds keep it up

[@orlandoagostinho6615]

Could you eventually buy the phase 4 limbs for the V3X

[@Bobbydoesarchery]

Miss these bow builds

[@richardjohnson6517]

How long till we get 10 degree down on the integrated stabilizers for an option in the riser?

[@jessewinger5989]

Would love to get the same string and cables as you have for my V3x. Can anyone point me in the right direction on what brand he is using?

[@joshcc1974]

I love the review, thanks.

[@coltondeterman8370]

I'm so glad to see you twisted the wrong way LOL i seem to always twist the wrong way. like butter side down on toast

[@TacoFiend]

“Catch us if you can” Mathew’s new stabilizer to my wallet!! 😅

[@ryanlefebvre5482]

In all of the Mathews Integrate rests you’ve had, have you ever experienced sticky launcher springs? Like the spring in it just isn’t butter

[@athosdecrignis5877]

Sorry Chris, what knot for the rest cord on the cable? Just a simple one? Great video as usual anyway you rock man👍

[@Bostcustomwoodworking]

I need this setup!

[@Mike-ul1xn]

hopefully this means more bridgelock sight options soon

[@antidk1084]

Hey, Chris. Are you using the UV3XL or just the UV3 sight? Thanks in advance.

[@alexanderrodriguez-cayro1607]

Being a Hoyt guy for years and having mine in the shop since the beginning of season waiting for parts now may give me a reason to buy this👀

[@Sherabhutia]

What's your opinion on the mission mxr bow and how does it compare to other bows in its price range?

[@thenatorbator2197]

Love the Bow builds

[@leroyewing3345]

What is your a opinion on the v3 27, I am shooting a mathews z7 extreme I want to step up to a newer bow I like small bows?

[@vanceriekels7171]

I would love to see a decibel comparison between the V3X and the Phase 4 to see what the actual difference is

[@jamesluscombe1234]

Elk Shape did one roughly in their latest vid

[@bowman.sweden3899]

You also need do a frequency measurement ro get it right.

[@eyesintheskies]

Wonder what bows will be like ten years from now. If your watching this is the future please let me know? When’s the 4x4 coming out? 4 limbs 4 cams no riser just a laser 😀

[@nolanohagan9588]

Hey Chris, I can’t figure out if you said it or where you said it, in the video but what size is this one that you got, and what is your draw because I’m a 30.5 and can’t decide whether to get the 29 or 33.

[@mikestackz854]

29 only goes to 30” you’ll like the 33 more

[@JOutdoor]

Chris, i'm having a problem with my peep sight on my v3. i've taken it to my pro shop multiple times and it keeps twisting. they tell me it's fine. but again i was shooting today and hitting to the left. adjusted the peep to line up straight and dead center shot. besides going to a different shop lol, what can i do?