New Headlights installation Electrical Connection H7 LED.

  Рет қаралды 34,138

Chris Caliente

Chris Caliente

Күн бұрын

electricalconn...

Пікірлер: 70
@emmettrowe5164
@emmettrowe5164 4 жыл бұрын
Hello Chris ..this is EMMETT..U.S.M.C..great video on the headlight installation.. it also helped me to install the speakers as well because when I WATCHED YOUR other video on upgrading your speakers.. you did not go into detail on how to REMOVE the panel to get to the speakers. Which was truly what I needed to see ..so,. this helped a lot ..but I ALSO wanted give you a heads up.. because electrical connection was not too happy with you ..for not contacting and letting them know that you were going to make videos of their products and they would appreciate you CALLING them to let them know.THAT you would like to make a video on their products reason being..when you make the video the buyers start to call in and they quickly run out of stock of the item you were doing the video on.. causing electrical connections to have a large backorder problem for the customers especially for this US Marine.. so just wanted to give you a heads up when doing your videos of their products. To please let them know in advance that you would like to do a video on their product so that they can get ready for the large orders, for that product so they can keep their inventory full .and not have a large waiting list because of back orders..so just wanted to let you know Chris.. I finally received my Bluetooth connection from electrical connections and we'll have to go back to your video for the install.. 👍👍👍👍👍
@rickwells3402
@rickwells3402 2 жыл бұрын
A minor point- for both removing and installing the heat sink, you said turning it counterclockwise. I'm quite certain anyone attempting such an installation would know that is not correct, I just wanted to bring that to your attention. Thanks for the detailed instructions!
@ValkyrieRiderIPT
@ValkyrieRiderIPT 4 жыл бұрын
Love it. Where I live there's hogs, deer, and other varmints that get on our roads. You can never have too much lighting. I have a 2002 Valkyrie with some extra lights I though lit up the road very well. After seeing your set-up my old Valk ain't nothing.
@majorhah8309
@majorhah8309 3 жыл бұрын
Installed a set today. What a difference it makes. Thanks Chris for sharing this video. It helped to make the process of installation easier.
@DanielEsquivel
@DanielEsquivel 2 жыл бұрын
I did it today on my 2004 gl1800 . I removed the shelter . Made it way easier.
@roadglide
@roadglide 2 жыл бұрын
That bike is on fire! Call fire dept. Always nice work Chris.
@roadtripper5553
@roadtripper5553 9 ай бұрын
I used to video twice. Thank you again.
@egore675
@egore675 5 жыл бұрын
Lights look good and was a great instructional for anyone wanting to install all types of headlights on the Wing.
@mervinoabrams9292
@mervinoabrams9292 5 жыл бұрын
Thanks Chris right on time with this install video. 👍🏾
@da72ma
@da72ma 4 жыл бұрын
Good deal Chris... I put in the Pathfinder LED kit for all lights... important is that Leads are good quality... with them or my Pathfinder I wouldn't have any issues...
@DergEnterprises
@DergEnterprises 5 жыл бұрын
Awesome job, good detail on the install. I have these hooked up to headlight modulators on mine. They are very bright at night on the highway.
@cknorris3644
@cknorris3644 5 жыл бұрын
Looking good brother! Coming down the road looking like the Starship Enterprise.
@timfoley3189
@timfoley3189 5 жыл бұрын
That intro is awesome!
@PeteR-ed9nd
@PeteR-ed9nd 5 жыл бұрын
Great instructional video..and who doesnt need brighter lights! Thanks for the info/howto.
@fabrizioleonardis1475
@fabrizioleonardis1475 5 жыл бұрын
I need deep light not necessarily bright...led are brighter but not deep at all
@NonStoppie
@NonStoppie 5 жыл бұрын
Sadly I do not have a Goldwing but still thumbing up. Always appreciate such an indepth How To!
@karltech6694
@karltech6694 5 жыл бұрын
I'm diggin it. But still not enough lights Chris... We need some aircraft strobes on there also! You'd be the first... ;-)
@davechurchill416
@davechurchill416 5 жыл бұрын
Nice job of showing how too do it professor Caliente 😁
@michaelsloane1034
@michaelsloane1034 Жыл бұрын
Wow chris I just wanted to tell you man you got mad skills brah omg dude seriously you put out amazing content and I love watch N your videos and you have helped me with my own ideas for when my goldwing will arrive peace my man and be safe out there
@saltydog361
@saltydog361 5 жыл бұрын
Hey Chris, I installed those about a year ago, liked the heat sink better than socal
@valhala56
@valhala56 5 жыл бұрын
somehow every time I think about upgrading something you make a vid on it Chris, you read my mind from hundreds of miles away. Pscyhic!
@chriscaliente5033
@chriscaliente5033 5 жыл бұрын
Brilliant minds think alike.
@jmorris9931
@jmorris9931 4 жыл бұрын
Great video, gives me a good idea what to expect for installation. Great looking bike, too!
@jmorris9931
@jmorris9931 4 жыл бұрын
Just did my install, new LED bulbs are a great improvement! A few comments: CW= Righty - Tighty, CCW= Lefty - Loosey, Heat sinks tighten w/ a CW turn. ;-) I was able to do the install without removing the upper dash panel. I have Medium sized hands and it was tight until I got past the top of the fork head. I'm right handed and for some reason, I had more trouble doing the left bulb vs the right bulb using my left hand. Go figure. Using the wooden stick is a slick idea, but I actually reattached the clip on the right bulb without using it faster than with it. Again, go figure. I used "industrial strength velcro" for attaching the power regulator. It was too tight to try the heated screwdriver trick (for me anyway). Zipties are definitely better, tho. Hooking up the wires was easy coming in from the front of the bike. Very happy with the improved light output! Don't think I could do the high beams though, too tight! Thanks, Chris!
@poppacapinya
@poppacapinya 3 жыл бұрын
cant wait to install mine i get flashed by cars all the time now imagine when these go in lol . great video
@jhug9764
@jhug9764 5 жыл бұрын
Clean install!(I'm a future wing owner)
@scorpiofor
@scorpiofor 5 жыл бұрын
Great job Chris
@davidleeakins
@davidleeakins 5 жыл бұрын
Man from now on , when we ride u are getting in the front,, and I am just going to turn my head light off lol ,, man that look real good ,,
@derrickanderson4932
@derrickanderson4932 5 жыл бұрын
Super Bright Chris
@curtisbryant330
@curtisbryant330 5 жыл бұрын
Here I go buying headlights now. Thanks Chris. LOL
@marlusstokes9466
@marlusstokes9466 5 жыл бұрын
Good detailed video
@RagtopRoads
@RagtopRoads 5 жыл бұрын
I think Chris has the best accessorized gold wing on the road.
@valhala56
@valhala56 5 жыл бұрын
Def and he is the King of the Gold Wing......
@RagtopRoads
@RagtopRoads 5 жыл бұрын
True
@chriscaliente5033
@chriscaliente5033 5 жыл бұрын
just one of many.
@DcArmy9015
@DcArmy9015 4 жыл бұрын
I Like your videos Chris. One thing I did notice, is that on the LED lights you stated an in correct temp range, its -40c to 80c which is 120 °C range, you mistakenly read it as 40-80°C, or 40° swing. Just figured viewers may think that it is not tolerant to big swings in temps when it actually is.. Thanks keep up the great vids..Dale
@HussainHH989
@HussainHH989 2 жыл бұрын
Thanks man
@BIGMAN503NYC
@BIGMAN503NYC 3 жыл бұрын
Hey Chris thanks for great video, I have a 2012 gl1800 and it seems it couldn't fit with the spacer the clip went on Ok without it. Is the spacer. Is it possible its not needed if it installs ok without it? Let me know thx , oops nevermind I found out the problem was the right side of clio did not come out so when I got it out I'm was able to correctly fit spacer it was very quick for the low beams I did not have to take anything apart I just put my hands from top and bottom ..
@fabrizioleonardis1475
@fabrizioleonardis1475 5 жыл бұрын
Sorry but led low/high bean are not better. They might be brighter but not deep...I prefer my high beam little yellow but way more deep down the road especially if I speed a little, no doubt about it
@photoggenes7443
@photoggenes7443 3 жыл бұрын
LOL Are you speeding at 186,000 mph?
@fabrizioleonardis1475
@fabrizioleonardis1475 3 жыл бұрын
@@photoggenes7443 you the only one that understand what you said!!??
@timchapman6702
@timchapman6702 3 жыл бұрын
@@photoggenes7443 It’s 186,000 miles per sec. not per hour. But I knew what you meant lol
@mikeknoll1130
@mikeknoll1130 5 жыл бұрын
Chris what leds do you have in Your hi beam sockets? Eclectically Connection H7,s or something else? Thanks for a reply.
@gavinbitz2563
@gavinbitz2563 Жыл бұрын
To do the high and low beams you'll have to get a set of 2 of the H7's correct?
@markvpool
@markvpool 2 жыл бұрын
Hi Chris - very useful … thank you !! any reason you chose Electrical Connection versus the Pathfinder LEDs ?
@johngallagher2265
@johngallagher2265 11 ай бұрын
Thanks
@robcraft1373
@robcraft1373 5 жыл бұрын
Was these bulbs cheaper than the pathfinders?
@sandynelson9569
@sandynelson9569 4 жыл бұрын
Hey Chris, Love the stuff you do with your Wing. Is there any problem with heat generated by the LED lamp on the rubber boot?
@emmettrowe5164
@emmettrowe5164 4 жыл бұрын
Well hello Chris was watching this install of those LED headlights in have a question you did not state the year on this video of your bike versus the year that we have out here I have a 2009 1800 Goldwing and wondered if the wiring installation is going to be the same on mine by all means let us know that these installs and accessories are for all of the GL 1800 from 2000 to 2020.. and we'll be waiting on your response my friend hopefully you will get this message
@bubblehead7680
@bubblehead7680 3 жыл бұрын
2001-2017 use H7 bulbs for headlights.
@Bass.Player
@Bass.Player 5 жыл бұрын
Have you installed LED's for the high beams?
@chriscaliente5033
@chriscaliente5033 5 жыл бұрын
Yes my I put LED in my high beams long ago.
@DJBIGSEXYBERLIN
@DJBIGSEXYBERLIN 5 жыл бұрын
Man you can see Jesus with all those lights. 😉
@emmettrowe5164
@emmettrowe5164 4 жыл бұрын
Oh and PS Chris you did not state or let us know what kind of electrical power draw on the stock alternator and battery from those new bright headlights..????
@photoggenes7443
@photoggenes7443 3 жыл бұрын
Less
@lonnie.stephens
@lonnie.stephens 5 жыл бұрын
Chris, that’s not a piece of wood you use for the head light clips. That’s a highly valuable, specifically designed piece of engineering marvel, or aka “specialty” tool! I use one for my ST1300 headlight bulbs. My teenage son, who rides an SV 650 and a Grom, says; Dad that tool is dope!!! I believe that means he likes it! He also tells me my tool collection is the bomb!! Is it me, or is English getting harder to understand?🤔
@chriscaliente5033
@chriscaliente5033 5 жыл бұрын
Lonnie Stephens Lol, English is not English anymore, it’s getting harder to understand
@OynxBlack
@OynxBlack 5 жыл бұрын
are those low beams in your side mirrors????
@smovride
@smovride 5 жыл бұрын
Chris.. Did I miss a video? I see another new set of speakers with what appears to be a volt meter.. Where can I get those?
@chriscaliente5033
@chriscaliente5033 5 жыл бұрын
smovride they are show chrome speakers, the volt meter is from electrical connection . Here is the link electricalconnection.com/index.php/product/honda-gl1800-f6b-digital-voltmeter-2006/
@bigbrew2573
@bigbrew2573 5 жыл бұрын
I thought you had the SoCal Pathfinders installed. Why do the switch to EC?
@chriscaliente5033
@chriscaliente5033 5 жыл бұрын
One of my low beams went out, upgraded to Electrical Connection
@bubblehead7680
@bubblehead7680 5 жыл бұрын
Something wrong with the LED headlights you already had installed?
@chriscaliente5033
@chriscaliente5033 5 жыл бұрын
One of my low beams went out, so I upgraded to electrical connection.
@hippielewis4768
@hippielewis4768 3 жыл бұрын
I will leave my stock ones in.
@ballykhan1650
@ballykhan1650 4 жыл бұрын
Hi bro.. I have 2012... What is i need for led... h4 or h7? Please explain in detail.. for both high and low beam .. I will be thankful....
@bubblehead7680
@bubblehead7680 3 жыл бұрын
Maybe late now, but low and high beams are H7.
@curtisbryant330
@curtisbryant330 5 жыл бұрын
I bought two sets
@chapterk-2586
@chapterk-2586 4 жыл бұрын
What is the cost
@ArthurRoy
@ArthurRoy 2 жыл бұрын
Good way to get rocks, hammers, grill of a 3/4 ton truck or pretty much anything that will kill you to shut those lights off
Show Chrome Honda Goldwings  H-7 LED Headlights
10:59
Chris Caliente
Рет қаралды 7 М.
Install Pathfinder LEDs on Honda Goldwing GL1800
13:31
Cruiseman's Garage
Рет қаралды 55 М.
Oh No! My Doll Fell In The Dirt🤧💩
00:17
ToolTastic
Рет қаралды 13 МЛН
У ГОРДЕЯ ПОЖАР в ОФИСЕ!
01:01
Дима Гордей
Рет қаралды 6 МЛН
Electric Flying Bird with Hanging Wire Automatic for Ceiling Parrot
00:15
АЗАРТНИК 4 |СЕЗОН 2 Серия
31:45
Inter Production
Рет қаралды 803 М.
Goldwing LED Flasher and Switchback Turn Signals Install
8:29
Chris Caliente
Рет қаралды 37 М.
The Truth about LED bulbs - Don't Buy LED Headlight Bulbs Before Watching This!
15:06
Goldwing New Owners Questions Answered!
20:30
D2 Destinations
Рет қаралды 6 М.
Changing Spark Plugs On A GL1800 Goldwing
8:56
Paul & Kathy Short
Рет қаралды 100 М.
Watch this before installing a LED bulb
10:20
goPat Channel
Рет қаралды 837 М.
How to install LED brake/tail lights on a Honda GL1800 Goldwing
13:13
Cruiseman's Garage
Рет қаралды 140 М.
Install GoldWingLEDs.com Driving/Fog Lights for Honda Goldwing and F6B
12:23
Top 10 Goldwing Accessories!!!
10:08
D2 Destinations
Рет қаралды 11 М.
Oh No! My Doll Fell In The Dirt🤧💩
00:17
ToolTastic
Рет қаралды 13 МЛН