Those are nice, I would still put jack stands in the corners I've seen too many failures. But all in all excellent and plenty of height.
@LifeOfAnAutoTech5 жыл бұрын
Love how clean the garage is. Good job. And the lifts are good enough for most jobs. Good stuff
@joekapel52854 жыл бұрын
Got mine today! Now I can detail my Corvette and change my oil.
@ramstar273 жыл бұрын
I just got mine yesterday. I'm excited about being able to get the car at a comfortable height to detail it also. (C6)
@richardkorab17595 жыл бұрын
Quick Jack is an awesome setup. I bought mine 3 years ago and very happy with the purchase and would recommend to anyone. For most applications, the 5000 is the way to to go.
@johnbrownlee76234 жыл бұрын
Man thats bad ass..................I must get one.!!!!........JB..
@johnbrownlee76232 жыл бұрын
ok, just got one.....need to put it together...And try it out...........✌
@gdog58412 жыл бұрын
Nice vid. Any update on how these are working 2 years in?
@timgreenshields24313 жыл бұрын
Nice video! Thanks for helping all of us. Tim in Colorado.
@artjinks29353 ай бұрын
I just bought the 5000 tl ,the jack pucks don't line up about 3inch difference
@Dragon-ty6lhАй бұрын
What did you end up doing?
@artjinks2935Ай бұрын
@@Dragon-ty6lh I took them to a friend of mine who owns a fab shop to weld steel plates in so I can get the distance I need to line up with the jacking points on a c5 .should get them this week.
@mikecolles89075 жыл бұрын
Very interesting , I'm interested in getting these too. My C5 Corvette would love them too....
@mycorvettelife5 жыл бұрын
They are great.
@USMCghost5 жыл бұрын
I see you switched them, from the first demo, due to the locking mechanisms being on the inside track. Smart man.
@thomaswilson86344 жыл бұрын
Drive Hub is his channel. Between your channel an his yall have taught me so much. I want to say thank you.
@frontxxrunner5 жыл бұрын
Costco did have an awesome deal. I just wasn't in a financial spot at the moment to buy but I doubt you'll find these cheaper for a long time.
@LeadDevelopAchieve2 жыл бұрын
what side skirts or rocker extensions does the car have on?
@beerbottlebaby3 жыл бұрын
Just ordered one today for my 1987 C4.
@kanth66 Жыл бұрын
Your orientation says that your Corvette engine is toward the back is that right
@lionelruningen60875 жыл бұрын
That is something I may only use occasionally, but got to have! Way cool. Thanks Chris for helping me add to my garage collection.
@h2oquality20105 жыл бұрын
Wish my garage was so organized as yours. But I can still fit both cars in it. Never seen this jack. Really informative. Thanks!
@nicolasbates2047 Жыл бұрын
Thanks for the video, I am a new c5 owner and will be buying a set of these ASAP. Quick question, where did you place the jack platform and where are the blocks lifting the car from?
@Iwillnotbepushed5 жыл бұрын
I was looking into one of these lifts. I’m glad I saw your video. I LIKE IT!
@FabioGs0075 жыл бұрын
I definetely need a set like that! Thanks from Spain tho!
@robgarcia1631 Жыл бұрын
you leaking oil, 3:46 . are oil leaks an issue or just user error?
@superdon1chw5 жыл бұрын
well that is good for flat spots on tires from storage
@SHODUUP2 жыл бұрын
How do the rubber blocks fit in the rocker slots where the pucks go in? Do they make any contact with the painted surfaces of the car ?
@backpacker725 жыл бұрын
Thanks for the review Chris! That's next on my list for my garage
@inquisitive9805 жыл бұрын
Very nice! Good choice.
@johniboz15 жыл бұрын
Just bought a C3 and I'm definitely going to need this! Thanks
@ronsteitz45354 жыл бұрын
Good way for storing car in Iowa winters or minor repair work.
@blaiwayw13 жыл бұрын
II just finished setting up the quick jacks yesterday. Haven’t tried them on my C6 yet. While I was tempted to try raising the jacks after bleeding the hydraulics, quick jack instructions specifically tell you not to raise the jacks without the vehicle in place. No doubt it takes a long time to lower them if you don’t have the vehicle on them. Don’t know if there’s any other reason for it. Otherwise, a good demo.
@serenedelusions3 жыл бұрын
Ordered just now...Have the Mobile 1 filter/oil ready, going to be nice putting the Speedway White c5 up now!
@macgroober13962 жыл бұрын
@Chris do you remember how much you paid? I seem to remember this sale going on a couple years back and I think they were $895? Now...$1450 is the cheapest I've seen.
@buickmonte5 жыл бұрын
Man....i need this for my garage(2004 vette).Thanks for the video.
@RARenfield4 жыл бұрын
This would be worth a Costco membership. Just need to wait for the next sale.
@tumyung96662 жыл бұрын
nice vid, i have the same. you might want to get some lift pucks to insert in to the lift points. otherwise its possible to crack the lower rocker plastics.
@mycorvettelife2 жыл бұрын
I have pucks.
@vettepwr235 жыл бұрын
I just picked up one of these two days ago. Have yet to set it up.
@thomaswilson86344 жыл бұрын
I dont know how this one got past me. I just ordered the 7k lb. Lift. Cant wait till it comes in. By the way there is a guy in Cobb county Georgia that rebuilt a c5 on you tube. He has a monster cam in his.
@SteveAZ7115 жыл бұрын
Thanks Chris. I have been looking into something like this for dropping a non-corvette engine from the bottom. I think with the blocks there maybe be enough room. This is a convenient and economical design compared to others.
@druechamberlain40185 жыл бұрын
I gotta do the same thing but I'm not convinced it will be high enough.
@generalcornelius18802 жыл бұрын
Awesome. What a smokin deal from costco too! Do you happen to know the minimum distance on the lifting playes on your quick jacks? The 5000TL is 37" and that isnt short enough to hit the lifting pucks on a c5
@davidfox63244 жыл бұрын
Garage looks awesome! Love my Quick Jacks!
@myfastcars4 жыл бұрын
Chris I want a quick jack. I'm torn between getting the 5000 ext or the 7000 ext. I own a C5Z, C6 GS and eventually a C8 ZO6. My concern is, Will the 7000 fit under the car? How much clearance do you have between the quick jack and frame on a fully collapsed 5000 on your car? We can discuss through e-mail if you need to. Thank You! Bill C
@mycorvettelife4 жыл бұрын
What would you be using the 7000 capacity for? All 3 of the cars mentioned will work with the 5000. Unless you are working on full size trucks, the 5000 is more than enough.
@Maximus091768 Жыл бұрын
Garage is fuckin spotless!
@adamknighten69094 жыл бұрын
The jacks look cool
@nowotarzan5 жыл бұрын
Can this be permanently installed on the floor? And can you drive over it? Or do you have to slide it under each time you use it? Looks great, never seen them before
@mycorvettelife5 жыл бұрын
No, they are portable.
@teczac76ny812 жыл бұрын
Which particular model you purchase that will work best with C7 corvette
@mycorvettelife2 жыл бұрын
I have a 3500
@Justone3729 ай бұрын
Nice 👍
@albertcooper6315 жыл бұрын
Wow Chris that is very nice and convienant.
@phillipmcgrath5992 жыл бұрын
Hi Chris , what lifting pucks do you use on your Quick Jack ? I'm looking for a set don't know which ones to get ...
@mycorvettelife2 жыл бұрын
Hockey pucks
@rayballinger18484 жыл бұрын
BIG QUESTION? My C6 Grand Sport is lowered. Will the Quick Jack slide under? IN ADDITION, do you need both pucks and the block, or only the block. I've been looking at the Quick Jack but I've never jacked up my car.
@mycorvettelife4 жыл бұрын
On a Corvette you will need a puck regardless. If you car is too low, my suggestion is to put a floor jack under the rear end and jack it up a few inches then slide the quick jacks in place.
@captaintom95214 жыл бұрын
You should dub in Benny Hill music while you're fast-forwarding during the unboxing
@grahamfrost24805 жыл бұрын
Scary stuff, but seems safe enough!
@robertdavis86824 жыл бұрын
does this lift the c5 high enough to drop out the driveline?
@mycorvettelife4 жыл бұрын
Yes
@theCycleReport2 жыл бұрын
how much clearance between the fully lowered q.j. and the jacking points on the car?
@mycorvettelife2 жыл бұрын
Depends on your ride height.
@theCycleReport2 жыл бұрын
@@mycorvettelife i meant how was yours
@robertsilverman99375 жыл бұрын
How stable are these? Is it safe to get under the car to work on it?
@mycorvettelife5 жыл бұрын
Very stable
@richritzwoller89005 жыл бұрын
Sweet video Chris. Quick question,..when you did your radiator service video with those adapter tools did that lower you temps at all?. I'm constantly 220-225 around town and the car being 20 years old has probably never had that done and dirty.
@mycorvettelife5 жыл бұрын
Those temps are normal, but if it’s never been done I would do it.
@sjllee25884 жыл бұрын
I am debating on Jack stands vs 4 post lift. What is your celling height? It looks low.
@mycorvettelife4 жыл бұрын
8’. I can’t fit a 4 post, that’s why I went with Quick Jacks.
@andrewstout7775 жыл бұрын
These are awesome! Definitely need a set, do you think these will lift the car high enough to pull the torque tube, transmission and rear diff?
@hendo66825 жыл бұрын
Greygoose c5 using both sets of blocks, it will raise it high enough to remove the rear cradle. You’ll have to lift your car a bit with a jack to get both sets of blocks under it initially.
@mycorvettelife5 жыл бұрын
I’ve seen people do it on jack stands so I’m sure you could.
@pedrojosehernandezrojas85603 жыл бұрын
hi Chris what brand of the quick jack do I need to buy for a c4 corvette?
@mycorvettelife3 жыл бұрын
QuickJack - I have the 5000SLX. Works for the C5 and C4 and I’ve used it on a dozen other vehicles.
@leecovette68955 жыл бұрын
Definitely would have been useful during our side skirt and front bumper lip installs hows the family?
@mycorvettelife5 жыл бұрын
Everyone is doing great! Avery is growing up so fast already.
@leecovette68955 жыл бұрын
@@mycorvettelife only going to get more fun man
@GR8WHITEC52 жыл бұрын
Looks like your local Costco had a sale on garden tools too. Hahahaha Nice garage. I like the paint scheme. Surprised you didn't go gray wall with Black and Red stripes at the top to match the Vette!! BTW, that C5 seat has seen better days. Hahaha No damage to the side skirts?
@mycorvettelife2 жыл бұрын
You don’t lift on the side skirts.
@raymondshartrand24172 жыл бұрын
Chris does your local Costco carry these? My local Costco, I’ve never seen them. I wonder if they still sell them on their website? I will check. What Costco do you go to? I live in Mesa so I go to the one closest to my house. Thanks for the demonstration on those lifts.
@katzazzproducts4 жыл бұрын
You are awesome
@Antonio-gs4jn3 жыл бұрын
Any damage to the garage floor? I have a finished floor
@mycorvettelife3 жыл бұрын
No
@nashrambler52465 жыл бұрын
That’s very cool!!! But I am one of those guys that takes safety far too seriously, I would have jackstands and blocks in places too just to be sure I don’t get pancaked. 🤣
@mycorvettelife5 жыл бұрын
It’s pretty safe. Each frame is the same width as a 12 ton jack stand, and 60” long.
@mycorvettelife5 жыл бұрын
kzbin.info/www/bejne/q3a6ZamJjK52l6M
@mycorvettelife5 жыл бұрын
kzbin.info/www/bejne/omeXkJ-lZs2Cg5o
@mmy5955 жыл бұрын
I thought the same.
@drjohnsonhungwell51153 жыл бұрын
Do you know how much clearance it'll give ?
@mycorvettelife3 жыл бұрын
18-21” depending on what blocks you use. That doesn’t sound like a lot but if seen people drop transmissions out with this. It’s plenty for 95% of jobs.
@drjohnsonhungwell51153 жыл бұрын
@@mycorvettelife I appreciate it I have a 94 C4 that's immaculate and was looking for a safe way to lift it i may get one of those or a drive on lift with scissor jacks
@pjfan1735 жыл бұрын
Which model did you buy
@mycorvettelife5 жыл бұрын
5000
@narcissistinjurygiver29325 жыл бұрын
i remember when i suggested you get some sort of lift and you responded by insulting me
@enkay37915 жыл бұрын
Ooouf
@druechamberlain40185 жыл бұрын
Crow is best served cold.
@timsmola99453 жыл бұрын
What is the lowered height? My C5 has 2.25 inch clearance under the pucks.
@mycorvettelife3 жыл бұрын
I don’t know off hand, but with my splitter and side skirts it’s low.
@wjlowe1113 жыл бұрын
How much was this? Do you still recommend it?
@mycorvettelife3 жыл бұрын
$1500, yes absolutely
@tommycastro73573 жыл бұрын
How much was it ?
@mycorvettelife3 жыл бұрын
$1500
@tokyodragonmasterlee4095 жыл бұрын
Nice
@colemcmeans78095 жыл бұрын
Does it lift high enough to get the trans out?
@mycorvettelife5 жыл бұрын
I wouldn’t want to, but I’m sure you could. I’ve seen people do it on jack stands.
@mycorvettelife5 жыл бұрын
The blocks come with it, not sold separately.
@raylegend8084 жыл бұрын
How much did Costco have them for? Thanks
@mycorvettelife4 жыл бұрын
Normally $999, I got mine on sale for $899.
@raylegend8084 жыл бұрын
My Corvette Life wow great price, I see they got it for 1199.00
@genej504 жыл бұрын
sweet
@119heath5 жыл бұрын
Very cool. I must have them.
@aaronmiles19714 жыл бұрын
Buy see electric impacts. It sucks using a ratchet as much as you do. You won't regret getting one.
@OMEGATECH5 жыл бұрын
U lucky Dog!!!
@emersonwilliams65463 жыл бұрын
Why did you not open the doors or hood and trunk due to stress on the fiberglass body
@mycorvettelife3 жыл бұрын
You only need to do that if you’re are lifting 1 corner.
@youngestson65375 жыл бұрын
Price?🤔
@mycorvettelife5 жыл бұрын
From Costco on sale for $999 plus $100 mail in rebate. They retail for $1400 normally.
@youngestson65375 жыл бұрын
@@mycorvettelife. Ok Appreciate the info.
@BlownC520003 жыл бұрын
I would still use floor jacks. I dont trust anything from Costco.
@mycorvettelife3 жыл бұрын
They are not Kirkland…
@wrends2 жыл бұрын
i think its not really safe
@mycorvettelife2 жыл бұрын
It’s very safe. Probably the safest vehicle lift on the market.