Hyte Y60 Build - Step by Step Guide

[@GX0n3]

Holy shit. That cable clean up was straight up wizardry.

[@ProxxyReloaded]

KZbin is the fuckin best. Haven't built a rig in a while? New futuristic case in my build? Oh no worries, there's a fucking clear step by step tutorial on how to build my exact case. Thanks man, shoutout all the youtube learners and teachers changing the way humans learn.

[@mjacecombat]

Just stopping by to say: Thank you for making this guide! I built my first ever PC in this case about two months ago (I'm using it now!) and this guide was incredibly helpful and easy to follow.

[@TheContentCreator_hub]

3 days a go I built my PC with the help of your video and I would like to genuinely thank you so much for this video which is amazingly helpful! :) Great job, you are the best! Best of luck!

[@Triberzis]

Commenting from my finished HYTE Y60 build in black thanks to your tutorial! Keep doing what you doing bro

[@Lowflyingmoose]

Just a tip for anyone following. I am doing a similar build, so first thank you, this guide is so helpful, first one that doesn't gloss over stuff. Anyway the best fan config I found is with the SL infinity Uni fans, they offer a reverse blade so you can have all fans without the X through them. Looks amazing and my temps are nice and chilly :) Good luck fellow fish tank builders this case is wicked.

[@bebp]

Learned more about the Hyte Y60 from this video than I did like 10 other videos I watched before this. Great video, very informative, earned a like and sub.

[@kenzington4short]

Just wanted to say thank you for this video. I picked up the Hakos Baelz edition of the Y60 when it released and have been sitting on it all this time. I wanted to find a step-by-step build using this case and this video delivered in spades. A few comments from a complete newb that might help others: - An Intel CPU is used here so it'll be a little different on an AMD CPU for the AIO cooler. -Don't remove the plastic cover on the heatsink connected to the AIO cooler until you're going to install it as that's where the thermal paste is. There may or may not be a finger print on mine. -And the biggest one for me: The motherboard here has the I/O shield (backplate thing) pre-installed so that step is not mentioned. It needs to be installed BEFORE the motherboard is installed. Ask me how I know. Even if you're following a detailed video, read the instructions for all of your components. 😬 Seriously though, thanks for the video. Especially loved the close up shots when connecting the cables to the mobo. It was very helpful.

[@NeuroPulse]

Your content is really good. Definitely the most thorough guide I've seen with the best close up shots and general detail shots from all angles.

[@catorunekojo]

bro hasn't watched linus tech tips's video

[@ondsnap]

Did anyone else notice his final build he changed the 2 140mm fans from exhaust to intake? I'm guessing his temps were not optimal so he had to change them from exhaust to intake?

[@SniperSpense]

Dude I know I'm so confused! And noone ever responds back anymore!

[@WoodenFilms]

I wish these builds would just stick to what came in the case.

[@BBC_bottom]

yoo, i am actually building in my hyte y60 case with this video rn. AND HOLYYY SHIT YOU HELPED ME SO MUCH cuz alot of tutorials kinda rush through it or take like 3 hours, so thankyou so much i am almost done, just the videocard :)

[@Grizgrig]

You attention-to-detail video and step-by-step write up where really helpful and much appreciated!

[@hytebrand]

Love the build and review of the case! Thank you so much for doing this video. Super helpful 💛

[@Pookiebear4000]

I'm saving for a build in the hyte y60 but you guys don't ship to Australia I need to find someone selling it for not to much wish me luck 🤞

[@anso3886]

@@Pookiebear4000pccasegear is in Australia and is a official seller of hyte

[@Alexandra-Rex]

Congratulations on the 50K! Glad to see you look at this case, been hoping you would for a closer look at it.

[@JayDoesVR]

I stand by it the Y60 is my favorite case of all time (Y70 as well for the extra spacing for airflow for triple slot cards)

[@sergiosandoval9275]

Hey Christopher excellent video as always. Two years ago I watched your build on lian li mesh cool II and I built my first pc. Today I watch this build as I attempt to move my new rig into the hyte y60. Cheers!

[@Johnnybandle]

I just wanted to thank you again because i got a 3 pack of 120's and i never realized 140's would fit much better and be so much more astatically pleasing!

[@michaelmalatesta5091]

Congrats on hitting 50k! I don't know what was different about this video but the audio has an echo.

[@rvs55]

Just got a Y60. Your vid is a godsend. Thanks! Subscribed.

[@Thomas-fe4sw]

Concise instructions with fantastic camera work. Thank you for showing how to plug in ALL the cables. 💖

[@PapiGrande1]

Just ordered mine for my first full build. I'll be using this as a guide for sure. Thanks bro.

[@PantsaBear]

In case anyone is curious about the 4090 in this case, pasting my comment after installing my GPU earlier: Can confirm the Gigabyte Windforce 4090 fits without issue (listed at 70mm wide, very close to glass and I would imagine max would be like 72mm). My PC: Ryzen 7 5700x, 32 GB Ram, Gigabyte Windforce 4090, Seasonic Focus Gold 1000W PSU, 2 sata ssd and 1 nvme ssd, NZXT Kraken Z73 vertically mounted, 7 fans total with the rear and top set to exaust, side and bottom set as intake. Set fans to "high" settings on NZXT and Lian Li software, but setting to standard made little to no difference. (I run all my games at 4k 120Hz on my LG C1) Results from running the following games at max settings (I run all my games at 4k 120Hz on my LG C1) : -Elden Ring (Never hit max load, 50 C) -Red Dead Redemption 2 (Ran benchmark which was sustained 100% load, no issues with max temps around 67 C, also ran gameplay with no issues) -Cyperpunk 2077 (ran benchmark, have not played through real gameplay yet but temps were low the whole time 68 C) -God of War PC (Was able to have the game sustain 100% load in the area where you can change realms at the table, left it like that for about 10 to 15 min, was able to have game ramp up to and top out at 80 C, but could not get it to go past this temp.) Hope this helps someone! Note: be careful when installing the GPU, its big and heavy. I broke the locking mechanism on my Hyte Y60 vertical mount :( might need to buy new riser cable from Hyte directly.kzbin.info/www/bejne/i3vQe2h8l75oiLs

[@RexZShadow]

Thanks! Had many people say the 4090 would not work for this case not because it won't fit but because thermal would be very bad. There is a special edition of this case I might want and was worried if i get a 4090 at some point but thanks for clearing htat up!

[@privatewojtek895]

Watched this whilst building my PC and it was a super helpful video. Thank you so much, Christopher!

[@makiwa]

I really like the way and also the detail you go into with your builds - these would be highly beneficial for novices! Thanks Christopher.

[@Charlie-ct5fd]

This is my first time coming across and watching your video. This video is probably one of the best and the only video that I can actually follow through. Well explained, shows where to plug in cables. aughhhhhh!!!!!! Where were you when I was building my pc😭 the amount of time I had to rewind and watch tutorials is crazy. Keep up the amazing work and content man! This deserves a like and subscribe!🙌

[@alexgroberman]

Congrats on the channel growing, another great build/review

[@11CarCarl11]

“Hears NI accent” subbed, nice to see a successful channel from home

[@nonbeliever3000]

This case looks really interesting. Thank you for the great video.

[@edb1913]

The best feature of this case is the huge amount of space you have to stash the cables.

[@ΓιάννηςΧατζηγεωργίου-θ9σ]

Congrats for another great build Christopher!! Always nice to see you ''building''. The case is outstanding but even more outstanding is the idea of a single cable for power/reset/led etc...at last someone thought of it!!!

[@elliot138]

aiutami a capire. nella tua assemblea : Lian Li Uni Fan SL120 (6 pieces) ? Lian Li Uni Fan SL140 (2 pieces) ? AIO costume?

[@dude-dt6lm]

I trust you with every cell in my body

[@jordanpop11]

Thank you so much for this video! Extremely helpful and thorough. I appreciate how you walk through the process concisely and explain yourself in few words. Bonus to linking the motherboard setup. 10/10 video. Subscribed

[@skeptikal_gaming8809]

I love this case. haven't watched yet, but eager to see what you think and how it builds. I'm so happy you're doing this!

[@WinterSoldierMN]

Hey man, I just wanted to say Thank you for your amazing work! I just build my second computer using your videos as guide.

[@amiesports]

Thank you for the in-depth build/review. I will force my GPU horizontally using spacers and a GPU holder.

[@ebaylover24]

I needed help with using this case and I'd say you helped me out a lot , thank you !!

[@jadedbreadncircus9159]

OHHHHH yes, you are exactly what I'm looking for. As I get closer to actually building (parts spread on floor now) small details are arising.

[@setoace]

honestly that case is no doubt aesthetically beautiful, I would love to have one and replace my O11D mini but those huge open gaps at pcie slots are just a big NO. house lizards at my home tends to crawl inside my pc to stay warm.

[@tarandeol03]

bro what

[@300sekkq]

mf buy an rpg and protect your pc

[@vickyf211]

Install a 3090 in your pc, lizards immediately gonna leave your pc.

[@MrFeli100]

Tape

[@KristianH1986]

Please lizard proof your game room my man 😂

[@dysnXO]

25:51 the HDMI port is being blocked by the metal things.. im having the same issue, any fix?

[@MrDeathseraph13]

Video saved! Building a new PC with the same case, and your video is of great help

[@DennDaniel]

Big help building out this case for the first time. Thank you for your hardwork.

[@nathanlewis5782]

Bought this case and mother board so this is probably the best video Out there for me

[@MrFrings89]

Your videos are excellent. You always answer every question I have and your production quality is brilliant. Thank you

[@inpraise.of.shadows]

This was very helpful, thanks. Looking forward to more builds from you!

[@BineshLad]

This is SUPER useful. Great production valau as well. Thank you for sharing.

[@hugofrutos9692]

Great video Man, was building my 1st PC and this video helped me a lot. Keep it going, tks! 👏🏼

[@turtlefeet7722]

thanks man, I really needed this video. Huge help!

[@FishBoneCh]

Building my first pc soon with this case. Gonna use this as reference.

[@gerrard9631]

Nice vid chris & im gonna use this this vid as a guide to do my new Hyte build...cheers mate.

[@1tommymulligan]

If your concerned about GPU Temps. "ColdZero" do a glass front/side at the GPU intake for this case,with a cut out which allows outside air to the GPU fans.

[@lenhumbird]

Christopher, your video is spectacularly detailed! I've watched tons of vids on AIO and custom cooler for the Y60. This video of yours is well beyond what everyone else is doing, in terms of completeness, accuracy, and presentation. What I intend to do differently is have a custom loop to water-cool the GPU and CPU, and add an internal sensor display. I definitely agree on using 140mm fans instead of 120mm at the bottom and side.

[@elliot138]

dimmi se metti Lian Li GALAHAD AIO 360 SL RGB V2 White andrà bene?

[@r0ugh]

Congrats on the 50k subs!

[@Johnnybandle]

Thank you so much for this video! I just got the snow-white one! 👍

[@alirios2241]

got lost when he said "two ate e-e-pin-es cables" did he say 2, 8 pin- aps cables?

[@jogolock1190]

Great find this, going to be my next build.

[@floodo1]

Thx, gonna follow along with my own y60 build this weekend. Thx

[@clarencestephen]

Awesome video, thank you! One suggestion- could you edit it so the mistake ~24min isn’t repeated by the next viewer?

[@Tempestkaine]

I took the rear fan off my case to replace with a corsair and cannot for the life of me figure how to attach the new fan ive been working on the build for a couple weeks so not sure what screws came off there any one help?

[@InsaneFlaGATORS]

Wish I could. They are pretty small Phillips head screws not sure actual size. I'm having issues myself. First pc ever and first build. Thought I was done and no power

[@InsaneFlaGATORS]

They weren't in the box with the corsair fans?

[@naam34]

for fuck sake m8, i thought i had a dirty spot on my monitor and my fat ass been trying to clean it off and im like its still there untill i went off full screen and noticed it was his wall thats a lil dirty lmao. 13:50

[@RSN-09]

Your motherboard and cpu happens to be the components I’m getting in that exact case!

[@Daniel-h4j3t]

I was thinking about going with an a red case with all-red rgb, thanks for the video

[@codyphillips0]

You switched the side fans to intake in the last clip??

[@sideshowr6]

Love the instructional video. TY. I will say that the angled screw placement at 24:40 made me cringe lol. You can also install 3 fans on the side panel as well. There's guide on here that show how to. I can't wait to build my y60 in the next few weeks.

[@BIGDOOKY]

Congrats on 50k! 🥳

[@nicklane7778]

Did he cross thread that screw at 24:40?

[@rtnguyen97]

Going thtu comments looking for this 😂

[@strooooble]

Congrats on 50k subs :D

[@matthewward1346]

Fantastic walk through!

[@raynicle]

thank you so much, this video has been a godsend

[@BenBoi720]

im so glad i found this. you have helped me so much thank you

[@billw1958]

excellent job, enjoy your builds and Thank You

[@TheTydino]

Hi from France .... Thank You for this nice video .... :)

[@j.b.125]

That was very helpful. Thanks!

[@xTorMenTx123]

Everything looks great but my OCD is killing me. Please tell me you fixed that screw to the PCIE lock when you screwed the riser cable in at 24:40

[@timf2533]

It would be nice to see how the temps would be for a 2800mm AIO set as intake on the side, and then just 3 120mm fans on the top set to exhaust.

[@jameshau7408]

That's what I was just thinking. I originally went for the artic II freeze 360 but it didn't fit, unfortunately that's not the first time (I really wanna know what case that monster fucking fits into)

[@snakebite1933]

Question 🙋‍♂️ I have a Micro ATX motherboard and for this christmas I always wanted this case!! So I want to know if it will be ok for me to use this case with a Micro ATX motherboard!!

[@Mwd52_]

Is it correct if I set the 3 fans on the top intake only and the rest of the fans are exhaust? 29:05

[@boredczechguy]

you saved me i was about to buy 2 200mm fans

[@clarencestephen]

Awesome video, thank you! One suggestion- could you edit it so the GPU cable issue ~24min isn’t repeated by the next viewer?

[@m4dcausebad143]

hi,idk if you can help i builded pretty much same build exept i have asus ASUS ROG Strix Z790-F and a 4080 zotac.first after i installed cpu,,m.2,NZXT Kraken 360-360mm AIO,ASUS ROG Strix Bloc d'alimentation 1000 W Gold PSU, i installed 2 normal Corsair LL Series LL120 RGB 120 mm, at this point i tried to power up and it go on fans was running exept the one came with the case so after i turn it off and install 2 other corsair fans and the 4080 and when i tried up nothing go on ,only mobo light up and a red light on it ,so after i removed gpu and tried again and still not working event the pcu fans dont run anymore the only thing light up is ram and the mobo rgb,did i fucked up and killed my mobo?

[@Mik3Th3Rock3r]

Am I able to mount the Riser cable on the bottom PCIe Slot for the graphics card ?

[@elliot138]

Si scopre che le ventole inferiore e superiore soffiano aria nel case? Spiega per favore 😢

[@mikecaseymotors]

Very well done - detailed, informative, and no stupid comedy. English was hard to understand now and then, but I was able to get most of it. Thank you, Chris.

[@tonylou8424]

hello can you help me plz i am having problem fitting my Lian-Li uni AL120 v2 ARGB PWM Lufter 3ER Pack onto My ASUS Rog Rujin 360 RGB all-in -one Liguid CPU Cooler 360, because of the side of the screws as they are not long enough can you give me the name and the side of the screws you are using in your video time@ 16:48 plz i am in the uk and i do not no what side i have to get and i am looking for #6-32x3/8 IN plz many thank TonyLou or links to where to buy them from

[@ChristopherFlannigan]

I used the standard screws that came with the AIO because the 1st version of the fans are 25mm think. You are having problems beacuse the second version of the fans are 28mm thinck. You need to add 3mm to the screws that cam with your AIO.

[@rafaelpaz3590]

I know this video is old, but just to make sure, you said you’d set the top radiator fans to exhaust and the two side fans to intake for best cooling correct ? I just finish my first build and want to make sure I get the best cooling

[@GameOn_2077]

Looks pretty sick!

[@faraz-i3x]

Very helpful video. Thank you.

[@samramtv]

I’m so lost, with the Lian Li part… mine aren’t turning on or spinning - it also wasn’t explained with cables to use on which spot for the fans.

[@yuyuko8925]

if you do not have enough argb or rgb headers, you can buy splitters cheap at walmart or whatever equivalent stores you have in your region. Single 3 pin argb header only supports 3 amps on my mobo, so a 3-long aio + 3 case fans was a little over for me. Got a splitter and was good to go. Electricity is weird. This guy has 2 argb on his board so no splitter necessary to stay under max. Mobo->3pin argb splitter splitter->fan->fan->fan splitter->aio is what end result looks like for me

[@Turn-the-light-off]

Congratulations 🥂🍾

[@applegeargaming]

hey bud with the aio mount i have the 280 versiona s i bought the wrong one but wanna mount at the top if i do you method could i still mount 3 fans in the y70 case?

[@crazefar]

Sweet build! Still contemplating if I should get this case 😅

[@LiquidBlackWolf]

The power button in my case dont light up? 🙈 And I have intake at the bottom.. and then just exshaust for the rest. With the radiator on the side. And 2x 160 fans exhausting on the top... When there is no load it makes a cool brease at the top of the case

[@travishunt8999]

4:30 do the bottom fans have to be standard 25mm thick or can they be thicker? If thicker, what is the maximum thickness? thanks!

[@rickylim2540]

Great video but the fan at the bottom doesn’t really need to be changed since it cant be seen easily anyway

[@ElsePoem]

im looking for the link for the original AIO fans but im not seeing it

[@glyphs320]

I should’ve payed attention. While building, my z73 wasn’t fitting due to my MB but after I rage quit and decide to come back tomorrow, I find out that you can take the top bracket off for the radiator 🤦🏻‍♂️

[@errol3438]

Thanks so much for your help.. Built my 1080P endgame machine.... :D

[@elliot138]

aiutami a capire. nella tua assemblea : Lian Li Uni Fan SL120 (6 pieces) ? Lian Li Uni Fan SL140 (2 pieces) ? AIO costume?

[@CollinLutz-p9e]

I got a GPU with an aio. I'm thinking I will be able to get lower temps because of that. Should help prevent more heat building up in the case. Hopefully I'm right.

[@Garfield_2.0]

What if it does not line up with the slot? Its between 1st and 2nd