Chrysler 300, dodge charger, challenger front speed /abs sensor

like comments and subscribe and share the love.
help me help you by donations no matter how small it is i really appreciate it here is my link to PayPal send it as if you are sending it to a friend
www.paypal.me/Momoboss5
thank you for your love and support

[@dropbear6740]

Thanks mate, finally a video that shows exactly what to do, without talking and carrying on, thanks again

[@zackhansen436]

Thanks dude, good stuff, helped me fix my car

[@AZuLD3ViL]

Great content, thank you for making this!

[@joebluth767]

I used the scanner at O'reily's and it said "Implausible right front wheel speed signal received" I changed the right front sensor. It works now. Thanks for the vid. BTW that red clip is a PITA. needs to come all the way out. then I slipped a tiny screw driver in the slot to pry up on the thin plastic tab holding the connector in.

[@edwinmontes6879]

Thank you for commenting this!!!

[@xXSOLOXx713]

Did your abs light go away after you replaced it?

[@CrabbingWithTony]

Thanks man!

[@KevinMcGuiremagician]

Thank you

[@Kay4sho_504]

Why do those always go out on the 300 , chargers and challengers so often ? It happened to both of my 300’s 2014 and 15

[@markellnicholson4492]

I’m having this same problem but I don’t know which sensor I should change

[@3MoOo0oRy]

hi dullah , i have charger 2014 R/T Max and i had an issue with my FCW it turned on and it won't turned off , can you explain how to fix that one ?

[@J4Gv33r]

I don’t have any scanner to clear the codes so how do I clear the codes? Or will the code go away on its own after test driving the car?

[@douglasgilliam1690]

Dullah, I have replaced the Sensor and tried the battery still can't get it to clear, any ideas?

[@mymillenia2001]

I changed mine but it’s still not reading. Could my tone ring be bad? How do you check it?

[@REVENGEISCANDID]

Would this process work for my 13 Durango? I have a “service park assist system” message.

[@johnarmstrong7230]

Very helpful

[@angellsantiago624]

Mamn I got 300 s 2012 my FCW, abs, and my stability control lights are on after heavy rain? Someone has some ideas

[@annaysraya3758]

Where did you buy the sensor from ?

[@musclelyfetv2248]

Hey I have this same issue now after a big burnout comp. can I use any code reader to find out which sensor is bad ?

[@DULLAHGOSOHARD]

Yes you can thats how you gonna know which one to change

[@ayodemayo]

So mine broke off past the connector … how can I reconnect this I can’t find it anywhere . It’s just two wires that need to be connected and idk which is which

[@carleeanthony8061]

Where did you get your part the dealership? Because I got my part from Autozone and my ABS Light it still on after i tried to clear the codes on a 2013 Chrysler 300s

[@DULLAHGOSOHARD]

Yes the dealership

[@christiandeville17]

so will this help my 07 charger shift out, it wont go over 35mph and i have heard it maybe something as simple as the abs sensors

[@multyt5339]

Did u ever fix it??

[@christiandeville17]

@@multyt5339 no I sold it. It was a computer issue and needed to be reprogrammed

[@multyt5339]

@@christiandeville17 I’m having this same issue...is it expensive?? My car won’t go past 20 abs and traction’s light on

[@chsl8452]

Mi chrysler 300 07 hacia lo mismo no pasaba del primer cambio y no marcaba la abuja de velocidad en el tablero era un problema en la caja de fusibles delantero un conector no conectaba bien lo areglamos y funciona bien ya

[@egossick]

Hey, do you know much about this product, "BlueDriver LSB2 Bluetooth Pro OBDII Scan Tool for iPhone & Android".....is this able to clear codes and such for a replacement like this?

[@DULLAHGOSOHARD]

I dont know the scan tool i used is from snap on it was 3k when i got it

[@caseybalvert3547]

The Blue Driver can read and clear codes. Nice little gizmo.

[@albrax6049]

Where can you purchase the front speed senor because I have gone to a few part stores and the tell me that its just rear sensors but I know there are front ones I replaced the back but the abs light still comes on

[@DULLAHGOSOHARD]

The dealer

[@albrax6049]

@@DULLAHGOSOHARD Thanks I just found a place thats has some.

[@pimpindnice910]

@@albrax6049 what was the part number for the sensors you found?

[@nadirtlizarraga3069]

So, i just replaced the abs speed sensor in the fault code on my driver side... and the abs light still on, is it necessary to delete the codes to get the abs light off?

[@DULLAHGOSOHARD]

Some time you have to delete the code and sometimes they will go away by just driving it

[@andrewoods3224]

Would changing the front wheel sensors fix my esp light from popping on? I can't go over 40mph if the esp light is on☹️

[@DULLAHGOSOHARD]

You have to scan the car first to see what is the people

[@valenzuelayasociados3826]

p1dc7-00 its sensor ?

[@6_robb82]

Same problem my charger is having I have a check engine light and my power steering isn’t working as well

[@MISTAKENEMOTIONS]

I had the same issue with my 300 2014 it was a poor ground connection

[@zeowolfpup4802]

Hi so u see there a peice of metal that holds those 2 wire the sensors and that other wire so mine peice of metal that holds those 2 fell out but i wanna know whats that peice of metal called can u tell me

[@DULLAHGOSOHARD]

I dont understand send me a picture of it on ig

[@blackoutrehabbing4195]

What if I don’t have the machine to clear code but I replaced the sensor?

[@DULLAHGOSOHARD]

Go to auto zone have them run it and clear it and aslo try disconnecting the battery for a few minutes

[@blackoutrehabbing4195]

Thank you so much well explained I unplug battery installed sensor like u explained plug battery back up and light went off. Thanks Brother.

[@marty303]

Is this the same on a 2015 Chellenger ?

[@DULLAHGOSOHARD]

Yes

[@AlexSmith-rz2cu]

I had the code c0031 changed the sensor and the code won’t clear

[@MrManiacosexual]

que singinfica el codigo p1cd7-00 en 300c 2013 motor 3.6 y como se puede solucionar

[@dinodavis075]

what model odb computer you use ?

[@yasmincantor9406]

Okey now I can officially fix pretty easy

[@presdige]

Why don’t mine say which wheel? It just gives me a code of u2110 and u1120

[@DULLAHGOSOHARD]

Try do a live data and drive the car and see which wheel not reading or behaving crazy

[@rachelstroman7109]

Where can u get that computer thing u used

[@DULLAHGOSOHARD]

Got it from snap on

[@franciscosalto3479]

I went to a mechanic and the where trying to charge me 900 to fix it

[@thezod2307]

Make sure you use OEM parts. They dont sell front sensors for 2015 or newer at parts stores. Found out the hard way.

[@jordansheppard169]

So u have to go to the dealer ? Because I bought one at autozone didn't work either

[@thezod2307]

This code is supposed to clear itself from just driving it.