Church Live Streaming Setup 2022 | Best Cameras, Switcher, Software, and Multi-Streaming Platforms

[@DavidAberdeen]

With the ATEM pro, and an analogue sound desk, you don't need an audio interface. We run a stereo mix out of the sound desk, and straight in to the Mic1 input on the ATEM. (with a custom cable, 2 RCA into 3.5mm stereo). Then the audio comes into the computer as part of the HDMI video from the ATEM. The ATEM also can process basic compression and level limiting on the audio.

[@davelongenecker649]

Audio Capture begins 10:08 Reverb 12:53 Limiter 13:18 Using a DAW 13:38 Beginner's Guide to Live Streaming for Churches 24:46 Pro presenter 14:41

[@jeremycf5122]

Stream to multiple places is very impressive and I can see the benifits, but I've found that with my church streaming to one place is better because you aren't dividing the viewers into seperate places. One stream, one very lively stream chat

[@Churchfront]

Yeah not a bad idea. I think I prefer the benefits of more people discovering the stream on different platforms and having redundancy in case a platform glitches or takes down your stream.

[@KeithWestInLimeGreenLoafers]

We run multiple streams and find different kinds of conversations happening on each of them. We have multiple hosts and a pastor on the streams. Also looking to expand into paid streams

[@BenReese]

@@Churchfront same for us. KZbin is my preferred platform and I think it's better quality live streams, but Facebook is more convenient for some of our congregation.

[@twelvegr]

❤

[@abimaelhernandez5595]

“A quick word from our sponsor, the like button” GENIUS! I’ll put a like just for that. 😂😂😂😂

[@michaelwolfe6924]

with the ATEM mini pro you don't need to route it through the computer at all... we stream directly from the ATEM mini pro to our church website and KZbin (both of which record automatically so we do not have that load on a PC either). Use the PC as an input to the ATEM mini pro! Doing this we also run a cable directly out of the mixing console into the back of the ATEM mini pro. This is even easier for a small church.

[@xFlapJack]

I’d really love to get more information on your whole setup! Looking into streaming my church’s service but struggling on what exactly I need to do so.

[@chriskaufman3160]

We also stream directly from the ATEM. We are having a little challenge with getting lyrics and scriptures in the lower third of the feed in a professional looking appearance.

[@putrimeta8370]

Hehehhe jeke milo lebih dari lr5fjro5figkfssssss dy Gtj je Hhhea ima

[@bertinrivasoficial1898]

And you can have 4 cámaras in action?

[@rachelyoung3553]

The only thing about streaming directly to KZbin is that you have to have 1000 subs. As a small church, that's not always easy to accomplish.

[@wagnercs]

Thank you for posting this. Very helpful! The only things I would recommend: 1) Consider the CABLING. If I follow your instructions and go-for-it, this will not work probably in the majority of situations. Mainly because the HDMI CABLES would not do it. Maximum length is 20 meters / 50 feet. Most churches are bigger than this, unless you move all your desk to the front of the church, and ends up being the main attraction of the service. Please talk a little bit about CABLES (SDI vs. HDMI vs. FIBER HDMI vs. SDI CONVERTERS); 2) Please check the costs, they are incorrect. Again, if I go-for-it once again, and I ask the church for USD 3K, this would not cut either. Again, don't get me wrong, just helping you being more helpful and effective. Thanks!

[@The14541]

may i help you with the cabling choices? my church built the streaming service around in the middle of last year so i know how the cabling choices is a bit worrisome there are few choices; 1. full HDMI cable, cons: expensive, and prone to breaking if it bent too much 2. SDI cable (i use this one), cons: you need converter if your capture card or video mixer, or your camera, doesn't have SDI in/out (still cheaper than hdmi, and more resistant in bending) 3. HDMI extender using UTP cable, cons: you got more equipments to take care of i did not included Fiber and Wireless bcs it's gonna really expensive LOL

[@thirdenvoqation7735]

If cables or distance is an issue, then consider wireless HDMI such as the Hollyland sets, bang for buck and ease of use they're some of the best on the market at this time.

[@wagnercs]

@@thirdenvoqation7735 That’s what we did. Bought 3 Mars 400s Pro. Some attention is needed for clearing frequencies, but other than that, the freedom they provide gives the production a huge added value.

[@adnanparray4235]

F

[@adnanparray4235]

F

[@laydellrogersjr8445]

Before watching this video, I had no earthly idea of live video streaming. Thank you for simplifying and breaking down this process. I am an old school pastor, however, I seriously believe it time to rethink how we do church. I hope by subscribing to your channel I can learn how to set up church like the young folks.

[@IhsaanS]

This video just gave me a foundation to start from, given a sudden influx of requests I've gotten since I started redoing my Mosque's sound system, now getting questions about lighting and livestreaming. Thanks a bunch, and God bless!

[@docboii7645]

Man this helps! Thank you guys for sharing this, I just started being sound man in my church because our lead guy stepped out of the position and I had already had some time with him learning everything he knew, then I was thinking there has to be a better way to run it and live stream our services, this will help our ministry! keep making informational videos! So excited to see what the Lord will do with this!

[@glendalechurchnewburyuk8533]

We’ve done a PC based life stream in the UK using a Cannon camera connected to pc via cam link over hdmi, iPad and iPhone connected over NDI for multi camera views and using OBS to stream to Facebook live and KZbin simultaneously. Audio comes from our X32 via the usb cable. Seems a good solution after almost a year of doing this. We have one venue with cable broadband and one venue where we use 4G LTE connection, but same setup at both.

[@wonabe]

had chance to try POE@lightning converters?

[@jason3000tt]

Hi, thank you for sharing. I am looking for a a solution for my Church. Can you send me a your product and software list? And maybe a Diagram?

[@tomiwaabayomi4876]

Please can you send the diagram for this setup

[@tomiwaabayomi4876]

Or an instruction

[@mcswipe16]

I was practically brand new at my church when Covid hit, they bought a PTZ camera, I mentioned I was good with that stuff, so naturally they had me set it up 😂. 4 years later as the worship pastor, I’m just now learning that this camera was $3,000 when they bought it 😶. Suffice to say, I’m very happy to now be included in these decisions 😅.

[@rccggraceland]

I was just hand over my church KZbin channel and I really need help with growing the channel. Thank you very much for this video

[@Samgill10303]

Praise The Lord, Hallelujah Jesus Bless U brother For very Important & Usefull Information For Churches

[@ThePlagueGameing]

Thanks for posting. We don't have the staff for full production but the volunteers we have are dedicated. We only have two cameras that are stationary. I only send them a two track audio mix from the console. There's zero editing. I'll share this with the video crew. Thanks! 😎

[@TomSramekJr]

We’re actually pulling the analog signal through the Mic 1 jack of our ATEM Mini. Maybe not ideal, but it works.

[@d.peter.i2928]

I think it’s okay, but if your signal is coming out from a mixer you need to change in atem mini sofware the microphone input to line in input. Sorry about my English, i hope you understanded.

[@streamsofgracechurchchicago]

My wife and I want to thank so much for all the information you have provided, we are a small start up church on a budget and your video has been most helpful. I will also be checking in on your copyright video too. FaceBook mutes any music used from videos.

[@4bitmultiplexer]

The guy doing the presentation has a good heart. H knows what churches need. Thank you!

[@stevec.5273]

"Godsend!" comes to mind, watching this! I'm the sole volunteer for a small church,

[@fwaynedavis]

We use almost the exact setup in our Church. For those on the fence concerning a multi vs single camera setup, don't hesitate to go multi. We use a second camera for a nice wide shot and it saves us a lot from when the first camera is at a bad angle, not ready or the talent is doing something out of expectation. And its easy!

[@DeanReynoldsMusic]

Now a word from our sponsor! “The Like Button” haha I’m stealing that dude! Jake

[@TheAlevelfilmz]

Yo bro the more I watch this the more helpful this becomes. Thank God for you!!!

[@SourceCreative]

By chance do you have an updated version of this tutorial.

[@chrish7336]

I am seeing many asking about an update and have to say I would agree. This is not bad information overall and equipment can be changed. For one a stand alone PC in place of todays laptops utilizing Free programs such as OBS could open many other options. 1- OBS is a full studio, titling, multi camera views, screen captures, multi channel audio, streaming or just recording, effects, PREVIEW AND LIVE views at the same time, etc 2- With multiple USB Ports (not a hub) you open up the ability of different feeds from cameras, projectors, video playbacks, etc. With all that said, the Atem switching unit can help with other options outside the software. IF using IP cameras, Interfacing other then Atem units are used, But make sure you have plenty of Bandwidth and PC power to monitor video feeds and livestream. I would love to see a review with Windows and OBS software utilizing the camera hardware he is recommending.

[@jg_jgjg]

Just bought 2 zve-10s for our church, and the sigma 18-50 f2.8 and the sigma 56 f1.4. We have the atem switcher, and will be streaming to YT. Thanks for the walkthrough, it’s helpful to send to a team so they can understand the overall system

[@johnthas]

Great idea! I just got a ZV-E10 for personal use and I will consider that model for use in church streaming since it's an A6400 in a new skin.

[@StGeorgesAnglicanChurchBerlin]

Very informative video, thanks. Might I add a suggestion? We're s small congregation with a very limited budget and we went with a MEVO Plus camera. It lets you choose between multiple areas of the picture so it simulates different angles. Together with a monthly subscription it also also allows adding slides and lower thirds and you can stream to multiple sites. It was about 400 EUR and works like a charm. Just a suggestion if you have a tight budget.

[@10411702]

Thank you. Two words that are simple to say but not said enough.

[@larryspohr8496]

We use the Roland V-1HD switch. We first went with the BM ATEM Mini, but there was way too much latency. We also have everything going INTO the V-1HD and NOT into Propresenter 6. We send lower 3rd graphics (with black text boxes) from Propresenter on a blue screen to the Roland which takes out the blue and uses live camera under the graphics. The combined signal splits from the Roland goes out to the main screens and to Boxcast for streaming.

[@MyDigitalHub]

God bless you, Jake!

[@sendasantiguasgiddings]

It’s good to hear someone break it down !!! Thanks

[@AdamSpenceVC]

One change worth considering. We take our audio feed from the sound desk directly into the Atem Mini Pro mini-jack input, so there's then a single combined audio and video output coming from the Atem to the PC. That eliminates any possible audio and video sync issues occurring in the PC hardware or software as they're already synced in the Atem. We've found this to be a better solution then sending a separate audio and video feed to the PC, and syncing there.

[@briannyamweya7224]

This sounds extremely convenient...blessings

[@louiskrugercreates]

What cables do you exactly use for the cameras? Is HDMI ideal for long distances between the camera and desk (which you have to account for)? A +30ft HDMI cable does not sound like a good idea. Should SDI rather be used (which would require a HDMI-SDI adapter)?

[@churchboy2112]

Could you do a updated video on the same subject but how to set up like wire it all up thanks

[@alexiscolt8849]

For multistreaming our church congregation we are using high tech cameras, the gears you suggested and a combination of OBS and StreamingVideoProvider. Your video triggered some new ideas which we'll incorporate soon. Thank you very much for sharing valuable information.

[@drpeks]

Thanks for keeping up. We always get new insights whenever you guys post a video. But I think you are kinda underestimating the power of proclaim as a whole. It does all these things Propresenter does and more. My church uses it and we have never looked back.

[@purdue_pete]

Help me understand for each red arrow in your diagram which cable is being used... hdmi, usb, etc. Please! ☺

[@TopOnePercentDads]

This helps a lot. Thank you taking the time to make this video. Have an awesome Sunday service tomorrow everyone.

[@bmbpenguin]

This setup is awesome. That Sony camera has the clearest pictures of all the ones we use. The ATEM puts out a great picture. Wish there was a decent free tablet option for controlling it, but there is not, that I can find. Thanks for the great summary.

[@cousinwiggly]

So you stream, present, and record from the same computer? How powerful does that one computer need to be?

[@petermoeller5901]

Not sure you still look for an answer. Considering that in this setup the external Atem unit does the video mixing, not very powerful. It will depend on your streaming resolution, but a mid-range i5 with 16gig of RAM will do that. A friend has streamed from two cameras directly connected to a midrange Macbook with some presentation via 4G modem.

[@christianlifefellowshipant5980]

What is the best way to get the signal from the camera back to the switcher in the tech booth? Are you using wireless transmitters and receivers?

[@KFLTotalAccess]

You are a Blessing, Jake. We want jump into live streaming in 2023. Is the Behringer X32 still your top recommendation. What would be the next step up, and also what would be the next step down. Thanks and God Bless.

[@paulson2008]

Thank you so much, I hope you have a online tutorial how to do it in details ❤️

[@akogepayo]

I think we need more FOSS or open source software in Churches today.

[@rb_Starboy]

Thanks bro it's really helpful for oru ministry.... thankyou so..much I'm from india tamil nadu

[@formx9796]

Hi question do you recommend the MEVO CORE….?instead for Sony cameras..thanks

[@comedianoyoo]

Thanks for Worship Ministry Toolkit, very very helpful

[@TheFlyboy102]

Thank you!!!!! This is exactly what I needed to get are church going! Life saver! We got a quote of over 9k for less ability!

[@SeanTolan_illuminated_imaging]

If running analog, I just run audio through my ATEM Mini Extreme ISO taking advantage of the ATEM's sound tools as my church. It is already well sync'd when it comes into my streaming software. I stuck with Vmix paired with my stream deck as I can code...but like you said, there are many solutions. Some work for different setups a little better.

[@perezgroupfilm]

Thank you guys this is perfect timing I’m getting ready to present my recommendation to my church for the much needed upgrades.

[@tanishaw8628]

Doesn't the Sony camera have the 30 minute limit for continious recording? What do you all do turn the camera off and back on every 30 minutes?

[@johnwiggins2796]

You just saved me weeks of work.

[@alexandre5929]

Thank you Sir fir your videos! May God bless you!

[@Reyfox1]

Is there a sync issue between the Atem taking input from cameras that are HDMI and the mixer? Also, micro HDMI are known to fail. We have 1 camera with HDMI mini and use Blu Tack to make sure the micro side of the cable is kept at the right position. Also, what about HDMI cables for long runs to the Mini?

[@db9482]

I’d also like an answer on this

[@Reyfox1]

@James Wilkes thanks for the reply! Looking at getting 20m, but didn't want to spend the money without having some input from those that are using it. SDI is way too expensive to setup for us, a church on a non-existent budget. Thank you!

[@DevalKirby]

I would like to see an updated version of this using the new black magic studio cameras. Also can this be converted to a wireless setup? Less wires the better. Also what sound board do you recommend, I’m looking for something small and more mobile

[@SamuelSThorp]

This is very helpful. Could I suggest that you add the Chapers to your video? Would be helpful for quick reference for when you talk about what.

[@MrHardrock]

Any updates for 2023?

[@rogerhassell3212]

We plug our analog audio mixer output into one of the 2 mic inputs on our ATEM Pro. That saves the cost and complexity of a separate audio capture box. Also, the ATEM Pro can delay the audio signal so that it keeps synchrony with the HDMI video.

[@Churchfront]

That's not a bad idea.

[@GiantSlayer-rr1vu]

I am live-streaming from home. I am new to the space and I am trying to build this system for the house. What camera, and microphone do you recommend? Thank you for this video. it is awesome information.

[@kylelambert8322]

Do you have people behind/moving all of those cameras? Do you have a good solution for remote controlled (either bases or...?)?

[@elmolikefire]

PTZ cameras as they are known (pan, tilt, zoom) can be kinda expensive, and controlling them can be a whole thing, usually you can go a long way with a couple of thoughtfully placed locked off (not moving) cameras, and then add extra cameras with operators as available. The bigger ATEM's can do PTZ control over SDI, and there is a company called middle things that have a solution for using DJI Gimbles as PTZ heads, which may be an affordable option if you already have cameras available

[@churchofgodinternationalja]

Can you recommend a good audio interface. My church would like to capture excellent worship session with a piano. bass and drum Running analog mixer with a USB out put but not so great

[@xpanderxt2]

Are there any audio/video sync issues between the mixing board out and the ATEM output? We don't want the pastor to look like his voice is dubbed from a different language.

[@tonylancer7367]

Praying to get a digital mixer to improve the live services.

[@DamonIrving]

Awesome video! QUESTION: Once we send the stream to social media and we’re live, how can we get that final social media feed on a jumbotron/in house monitor for audience in the back?

[@papajoe7]

Question what is a streaming good lens that would shoot long-distance like in the church or in a autotorium like a person is 300 feet from the camera what is a good lens 10 mm to what distance it will get me a close up shot a headshot half body shot. Any suggestions

[@adrian_sanchez]

If i'm not mistaken, you need 1 more device in your gear which is the device to convert the HDMI output of your switcher to the streaming computer.

[@DeltaWhiskeyBravo13579]

At least on my setup, the ATEM Mini Pro does that itself. I have 2 cameras into HDMI 1 and 2 on the ATEM, an audio in from my mixer and a Presonus Studio 68c USB interface into mic 1, then out to KZbin via the CAT cable, and via USB to the PC where I also send out A/V to Zoom Meeting.

[@adrian_sanchez]

@@DeltaWhiskeyBravo13579 ​ You are right....that is most often the case when you have everything in one location. I was thinking of my scenario where our video switcher is far away from our mixer. Which requires some potential HDMI/SDI conversion either to or from your mixer or lyrics overlay software.

[@DeltaWhiskeyBravo13579]

@@adrian_sanchez I see, sorry I didn't know that you had a distance gap to take into consideration.

[@adrian_sanchez]

@@DeltaWhiskeyBravo13579 no, no worries. So much different scenarios. I wish mine was simpler

[@karldahlin858]

Why do you not plug the audio into the ATEM mic 1 or 2? Or why do you not plug the audio from the mixer into one of your cameras?

[@WurdsIsHard]

Same question. It seems like they made a conscious decision to not benefit from some of the key features on the ATEM, and I suspect because there is a (possible financial) bias toward ProPresenter/Resi

[@karldahlin858]

I asked because I can't get mine to sync even with the clap test. Wondered if anyone one else had that problem and gave up.

[@fadensibamtaki5129]

I love the updates on this video. I watched the last year video and it helped me organize the Media team in my church during lockdown. It also opened me to a lot of Livestreaming tools. Nice work Jake

[@MessianicJudaism]

I prefer using the Tricaster TC1 4k system. The TC1 can do everything that pro presenter can do and more.

[@tonydileo9246]

I would like to stream the big game every Sunday can you implement these tips and setups for live streaming anything ?

[@margiebowers7877]

great help! Glory to God Jake

[@justinramirez8663]

I sadly need a good PTZ camera for lowlight . These cameras are great but in our situation we need to have control over them remotely. Anyone have recommendations for an awesome PTZ camera?

[@repentandfaith]

Does anyone know if he shows us how to use and route using Dante in the beginners guide to live stream course?

[@Hendea2]

Why go through pro presenter and force a second encoding pass rather than using the keying in the atem? If the overheat issue is the problem, you could get a better atem to handle the keying and still have money left over compared to the cost increase for the propresenter system to have sufficient oomph to handle the graphics overlay and reencode.

[@cliffreynolds7199]

Thanks Jake. I noticed on the setup that the price for the Atem Mini Pro wasn't listed which would increase the overall price. But still great recommendations.

[@Churchfront]

Dang good catch! lol I've updated it now. Fortunately it keeps it close to the $3k range, especially if you go with the base ATEM Mini.

[@samgonza1975]

Also you mentioned something for the guys at RenewedVision.... how about a “wizard” for assisting in set up. Like in OBS. When they first turn on PP7, it could ask them what they are using, house screen, confidence, streaming etc etc. Or like a couple of “presets” to help beginners or even bets get up and going with their system. Just a thought.

[@samgonza1975]

Vets***

[@chrislai1093]

You did not remind people about the HDMI distance limitation. If the cameras are too far from the AMP, there might be problem with the picture. 25’ is the normal safe distance limitation, which effectively make the camera 15 feet from the desk.

[@Churchfront]

I’ve used hdmi fiber cables for 100ft and they work fine

[@chrislai1093]

@@Churchfront but most of your audience don’t know what is HDMI fibre cable. They will just go buy HDMI cables from Amazon and then it won’t work.

[@mspark933]

@@Churchfront What brand and how many inputs? Where running into flickering video issues on inputs 2/3/4 using HDMI (25ft ONN Walmart 4K) cables running from our Mirrorles Sony A63/64/65's). Thanks for being a huge blessing to everyone (churches, schools, and businesses)!

[@OffGridandOutdoors]

Are you trying to get me killed? Biggest issue I see for us switching over to pp7 as a streaming platform as well as presentation platform is job overload. Our pp7 person is already doing lighting, in room mp3 and pp7 presentations. Our broadcast producer is on a separate pc doing 4 cam with coms and all broadcast graphics, lower thirds, and pp7 captures. Combining would put it all on 1 person.

[@Churchfront]

haha, ideally you will still have two people operating this setup. have someone dedicated to cutting live action cameras on the ATEM mini and give them their own multiview screen. The person in propresenter will do next to no video switching.

[@vakouxiong2028]

What would you recommend for those who prefer more wireless devices and still have a solid connection live streaming?

[@DeedreCousins]

You could also plug the aux bus into the atem as a last resort. However, you need a way to monitor the audio going out to stream like a monitor with audio out.

[@christo-centricminds6681]

How can I get you guys to set up our church sound system and streaming

[@mtnguyen1696]

can you share what camera settings should be appropriate for this setup?

[@droidfan]

Has anyone mentioned cable management? How are these all connected? Wireless? Wi fi? Router? Bluetooth? 3000 ft cables taped to the floor?

[@DiscoveringTruthPFpastorforbes]

Great video - absolutely clear for a new user

[@aricastillo6029]

Hi, very informative thank you, I have a Nikon d3300 what lens do I need in low light?

[@evansmosomi6892]

Hands down most helpful tutorial!

[@txtarheel2]

How do you deal with long cable runs? For example, if the switcher is located with tech at the back of the room, how do you connect to an onstage camera?

[@AZ-pp5qs]

You can connect via converter/adapter. HDMI to Ethernet video adapter. That's how we used it in our church, very reliable. We never loses video feeds.

[@videocastr3286]

@@AZ-pp5qs That's what we do sometimes when we have long runs in a convention hall or ballroom. Or, we use HDMI over wireless if it's room-to-room. Always looking for new solutions though.

[@kosmicmisfit]

Wow that’s a lot to learn. How much would a minimal one camera solution cost. So basically on a shoestring budget. Thanks

[@AllamHouse]

I know this video is old, but I'm in the hunt as I troubleshoot and I'm looking for info anywhere I can find it. My church has been streaming through OBS 1080p29.97 with an ATEM TV Studio HD and throwing NDI info from Pro7. For some reason the audio portion of NDI stopped working which made us jump to our long term plan of streaming through Pro7. We ran a test and everything worked... until Sunday. Today we got setup and things seemed to be working pre-service and then after our countdown video we switched to the camera feed and it hung. What I'm trying to figure out is if we need to change settings (like in OBS) for the video processing of the stream to be handled on a different video card within our 2022 MacBook Pro (with the M1 Pro chip). In my hunting I'm trying to figure out if my USB-C dongle is potentially my issue (even though it all worked prior to going live) since it is a multi-plug that runs ethernet in addition to our USB input for the ATEM. I'm kind of grasping at straws here, but I remembered this video and figured I'd see if there were any small details I was overlooking.

[@samuelcl9667]

Hi...thanks for supporting with useful content.... Ur During crowd, we could not able to record qood quality of audio. There was a air noice mixed with audio...so Pls suggest me, any idea....

[@soundproof8635]

Hi Jake, I hope you can help me about this. How to setup two analog mixing console for FOH and for live streaming? Thank you for your help.

[@drpeks]

My question still is how do we achieve multiple extended modes for confidence, livestream and in house PowerPoint from a MacBook Pro when the dongles only do mirror display.

[@Churchfront]

stand by for new video coming soon.

[@mirandaglass33]

I’m not sure if I missed it or if it’s covered in a separate video, but when you’re sending your final feed from Propresenter to the different areas such as Front of House, Overflow/Recorded Feed, Confidence Monitors, etc., how are you able to send the different ProPresenter looks with so few USB C jacks on a standard Mac?

[@salperezate]

Amazing video! Thank you for all your recommendations. It’s an amazing work you all do in Churchfront.

[@trina3176]

What are your thoughts on Open LP? Our church is small and very budget conscious, I just got put in charge of the media and will be basically starting from the beginning.

[@danielcuster384]

Was thinking of buying PTZ cameras, but the quality on those Sony's is way better for less money. Do you have any cameras that can move around that you recommend? OR!!! Do you recommend stationary cameras for a church setting over a PTZ cameras because of the reasons you said in the video? Thanks for all this info too, we've got a good setup but are looking to add more cameras.

[@deckxszy]

Great content man. Blessings... What would you suggest for a small gathering of a 100 persons. Gadgets, setup and pricing. Thanks

[@jakebray4240]

A lot of analog consoles have a usb 2 track out to a computer. Probably should have mentioned that as it means they wouldn’t need to buy a soundcard!

[@michaelshively2893]

Assuming you cant put the cameras within close proximity to the computer.......you would be better converting to eithernet? I would suspect most churches dont have the console that close to the stage.

[@Tejoz]

Thank you for the sponsor like button for making this video possible.

[@dinhal8783]

Thank you for the Video , they are very informative and provide overall feel of what's required during live streaming, does streamyard considered multi-streaming platform ? Thanks

[@chris12780]

Interesting. Besides the internet, do you also know how to utilize what the television station uses as well?