Cisco IOS Configuration Files

  Рет қаралды 8,066

Kevin Wallace Training, LLC

Kevin Wallace Training, LLC

Күн бұрын

Пікірлер: 15
@Oomtet
@Oomtet 2 ай бұрын
thank you Kevin your videos are great....
@rogersblog2562
@rogersblog2562 11 ай бұрын
Great Video 👍
@133major7
@133major7 11 ай бұрын
sir, could you please make a video explaining cisco ios naming conventions? what is the difference between the ios naming conventions and the device naming conventions
@ryancruz7104
@ryancruz7104 11 ай бұрын
Awesome, thanks Kevin
@Tanaka_Mhuka
@Tanaka_Mhuka 11 ай бұрын
vid is very helpful thank you
@NathanielBoykin-p2c
@NathanielBoykin-p2c 11 ай бұрын
@kevin I've been working on a 3560 layer 3 switch. Accidentally deleted the iOS file and I'm unable to restore it. The layer 3 switch is stuck in ROM mode, how would I restore the iOS and switch to factory default ?
@leothalion3983
@leothalion3983 11 ай бұрын
Is there an update on this answer
@ChipsChallenge95
@ChipsChallenge95 11 ай бұрын
Load a valid image compatible with your current rom on a usb and boot from there, then do copy usb0: bootflash: ios.bin, set configuration register to 0x2102, wr mem, reload
@NathanielBoykin-p2c
@NathanielBoykin-p2c 11 ай бұрын
@@ChipsChallenge95 I do not see a USB port on the 3560 Cisco layer 3 switch would I be able to connect a ethernet to USB hub and still get the same result to transfer back on the needed iOS from ROM mode? Also would I need to apply a IP address and subnet mask on the lair 3 switch in order to transfer in ROM mode? I am building a home lab to study for the CCNA exam. I also have two 2960 layer 2 switches along with three 1841 Cisco routers for my lab.
@kenfk3794
@kenfk3794 11 ай бұрын
If you have an L3 interface and a tftp server you can run your ios through tftpdnldr. It takes a while but is a lot faster than xmodem/zmodem rommon 1 > IP_ADDRESS=X.X.X.X rommon 2 > IP_SUBNET_MASK=X.X.X.X rommon 3 > DEFAULT_GATEWAY=X.X.X.X rommon 4 > TFTP_SERVER=X.X.X.X rommon 5 > TFTP_FILE=iosfile.bin rommon 6 > tftpdnld -r
@kenfk3794
@kenfk3794 11 ай бұрын
This would be a great opportunity to mention "show archive config differences"
@paulosteven
@paulosteven 11 ай бұрын
Nice one would be good to have one for nexus too.
@stephen-collins
@stephen-collins 10 ай бұрын
Important point about tftp - your backup file must exist on the tftp server prior to copying. Otherwise the copy command will result in an error.
@Roo23th
@Roo23th 11 ай бұрын
Kevin is it a good idea to move from Europe 🌍 to US 🌎 as a cyber security professional who's not yet much experienced? I'll finish my university this year and I'm thinking about moving to the US and work there for some time to get more experience. I'm not ready to move yet but after I get more experience here. Is it even a good idea? what do you think? 🤔
@Roo23th
@Roo23th 11 ай бұрын
Is like the US open for foreigners who want to work in their country?
Getting Started with NETCONF
17:36
Kevin Wallace Training, LLC
Рет қаралды 58 М.
Жездуха 42-серия
29:26
Million Show
Рет қаралды 2,6 МЛН
번쩍번쩍 거리는 입
0:32
승비니 Seungbini
Рет қаралды 182 МЛН
Cisco IOS Automation with Ansible
31:22
Kevin Wallace Training, LLC
Рет қаралды 58 М.
13. Cisco Configuration Files
14:15
System Engineer
Рет қаралды 6 М.
Configuring an MPLS Network from Scratch
56:02
Kevin Wallace Training, LLC
Рет қаралды 78 М.
How to start your HomeLab journey?
17:32
Christian Lempa
Рет қаралды 152 М.
How To Configure SSH On A Cisco Device | Secure Connection
9:34
KBTrainings
Рет қаралды 33 М.
Жездуха 42-серия
29:26
Million Show
Рет қаралды 2,6 МЛН