Citroen C1 Front Bumper Removal/Refitting Guide (CityBug/Aygo/Peugeot 107)

[@johntaylor5968]

This bloke is great, he’s a cross between Guy Martin and a Wigan pie muncher, so down to earth yet quite informative.

[@StupidBlokeStupidVideos]

Nice one 🤣

[@howardatherton3889]

Loving the one handed approach to every job ... Skills!

[@StupidBlokeStupidVideos]

Skillz 😂

[@flapsfalkland5181]

Another technical automotive instructional video Sir Tim. With my shitter, i have a supply of cable ties to refix the bottom as the bolts are there but the plastics are fucked........next time it comes off will be when i get a new rad 👍

[@StupidBlokeStupidVideos]

Good luck. Cable ties are often my go to equipment when attempting such a task.

[@flapsfalkland5181]

@@StupidBlokeStupidVideos always handy to keep a stock of 👍 not sure when i will be doing the rad yet, too busy with two transits 🤣🤣🤣

[@StupidBlokeStupidVideos]

@@flapsfalkland5181 I keep a door pocket full of the shitters. The equipment you’ll need in the door pocket of the Transhaggers is probably a mig welder and a welding mask 🤣

[@flapsfalkland5181]

@@StupidBlokeStupidVideos tru dat 🤣🤣

[@back2skooldaze]

have you a link for new replacement clips that fit under the wheel arch. Also the clip that fits under bonnet the one clip ?

[@StupidBlokeStupidVideos]

No mate but they are just plastic rivets of various sizes. You can buy a selection of them in a kit off eBay last time I looked

[@tomthompson7400]

ambassador ,,, you are spoiling us ,,, two in the same weekend ,,, this is better than a pyramid of Ferrero Rocher

[@StupidBlokeStupidVideos]

Hahaha ffs

[@MarkStott666]

Surprised you didn’t add 3 more intercoolers while it was off

[@StupidBlokeStupidVideos]

Sounds like a plan 🤔

[@14rnr]

I love your direct no messing videoes

[@StupidBlokeStupidVideos]

@@14rnr thanks mate 🤣

[@LabFan369]

Hold on a minute, I spied a three branch manifold. Is there a vid soon ?

[@StupidBlokeStupidVideos]

Well spotted, it will be an upcoming vid in a couple of weeks or so

[@arnietwo11]

When i was trying to put the undertray of mine back on today 2 screws just wouldnt tighten? So a nice new red raw plug got pushed up into the hole first and problem solved !!

[@StupidBlokeStupidVideos]

Fixed is fixed 💪 Was it the two corner screws by any chance? The plastic but it threads into pushes up out of the way if you don’t get it perfectly lined up.

[@thhc1744]

2 videos in 2 days? YES!

[@StupidBlokeStupidVideos]

Don’t get used to it though 😂

[@bobdebouwer7835]

Also check behind the front number plate. In my case there was a screw there.

[@StupidBlokeStupidVideos]

I’ve never seen that before. Someone rammed a tech screw into yours?

[@bobdebouwer7835]

@@StupidBlokeStupidVideos Yes, through the bumper and into the metal support beam that is behind it.

[@Zeebean384]

Can you replace the bumper with the facelift bumper??

[@StupidBlokeStupidVideos]

@@Zeebean384 I believe so yes

[@Zeebean384]

@@StupidBlokeStupidVideosnew video idea?? Could even upgrade to the facelift headlights 😁😁

[@StupidBlokeStupidVideos]

@@Zeebean384 when you say facelift, you don’t mean a mk2 do you? They are completely different. There’s 3 versions of the mk1 though and those bumpers as far as I’m aware are interchangeable, but the mk2 one isn’t

[@RAMANOFFICIAL1]

Hi I'm planning to put a led light bar behind the bumper any suggestion? Size location etc.

[@StupidBlokeStupidVideos]

Hi mate. Just whatever fits and what you like tbh. I fitted led spot lights/fogs to mine but the beam could be much better kzbin.info/www/bejne/Z6nCaa2ErMxpiLc

[@RAMANOFFICIAL1]

@@StupidBlokeStupidVideos yes i cant find no videos because nobody has got it installed on c1 or aygo. If the beam now is not good u may drop a video of how to install a bar light.would be usefull attached to highbeam .thats the plan.

[@StupidBlokeStupidVideos]

@@RAMANOFFICIAL1 it would be very similar to the job of fitting the spot lights but probably mounted to the bonnet instead? If I get hold of one cheap one day I’d love to fit one

[@RAMANOFFICIAL1]

@@StupidBlokeStupidVideos fantastic 👍

[@skippyglen6610]

A 3 branch, I feel a run round the Nuremburg ring coming soon.

[@StupidBlokeStupidVideos]

I don’t even have a passport 😕

[@garrynutter860]

Tim, Has someone nicked the Cat and replaced it with a Piper ?

[@StupidBlokeStupidVideos]

I knew someone would notice haha

[@aleksandergjengst782]

Did u notice any difference after making that air intake at the front??😊

[@StupidBlokeStupidVideos]

@@aleksandergjengst782 a little, but not as much as when I made a full blown sik ram air intake 🤣. I made a video of both, this is the cold air feed one kzbin.info/www/bejne/pIrIiYFjZrl2qrMsi=BtD0DluLxo055hsx

[@StupidBlokeStupidVideos]

@@aleksandergjengst782 this is the ram air intake which was definitely noticeable kzbin.info/www/bejne/qKjTqJpmmdN2a5osi=cJ0FPVPenhVgYuhg

[@jxmes6476]

My passenger side doesn't want to go in or even line up, drivers side is fine but it's like the other side isn't the right shape

[@StupidBlokeStupidVideos]

@@jxmes6476 the clips are probably broken. Not unusual on these tbh

[@jxmes6476]

@@StupidBlokeStupidVideosIt's a brand new bracket and bumper, they're all fine, the bumper seems like it doesn't stretch far enough under the headlight to clip in

[@StupidBlokeStupidVideos]

@@jxmes6476 oh, not sure about that one without being able to see it tbh.

[@jxmes6476]

@@StupidBlokeStupidVideos Can I send you a few pictures via DM?

[@nickelito0]

Great video, thanks!

[@StupidBlokeStupidVideos]

Thanks mate

[@olitonottero7620]

super helpful , you should be knighted for this

[@StupidBlokeStupidVideos]

@@olitonottero7620 thanks 🤣

[@dfbiker]

Thanks pal 👍

[@StupidBlokeStupidVideos]

You’re welcome mate 👍

[@Damsboe]

Job Well Done.

[@StupidBlokeStupidVideos]

Got there in the end lol

[@1Supernoober]

A massive pain that bumper.

[@StupidBlokeStupidVideos]

It can be, especially doing it one handed and when the corner the clips don’t pop right 🤣

[@glynmillett1388]

Shitter 😂 brilliant top man

[@StupidBlokeStupidVideos]

Cheers mate 😆

[@bjorndepauwbjorndepauw]

Pretty easy

[@StupidBlokeStupidVideos]

These are east cars to work on, that’s what I love about them

[@Dark-Lord3386]

I hate those plastic clip things citroen use. Always break

[@StupidBlokeStupidVideos]

Especially when you have to remove the bumper every time you need to work on the shitter

[@Dark-Lord3386]

Yeah lol

[@bettyourcampervan]

See Flaps 😅😅