How to Remove Your Cars Front Bumper

In this video, you will learn how to remove your car's front bumper. The front is mostly secured with plastic clips which is quite common with all modern vehicles. These plastic clips are fragile, so be careful with it or else, you will replace them.
- remove
- bumper
- how to
Car used for demo:
Mazda 2 / Demio ( DJ ) Skyactiv
Similar to:
- Toyota Yaris R iA
- Scion iA
For more Mazda 2 / Demio ( DJ ), Toyota Yaris R ( iA ), and Scion iA videos, just click the link below!
• PMS (Preventive Mainte...
BGM:
KZbin Audio Library
RESPECOGNIZE - Diamond Ortiz
BeeyornandRaysd - Noir Et Blanc Vie
Intro music: Cutting Edge - Shutokou Battle 01 (Tokyo Xtreme Racer 3)
Subscribe now for more videos! :D
Thank you very much and God Bless.
#andredraftproject #mazda2 #mazdademio #skyactiv #toyotayaris #yarisr #yarisia #scionia #remove #bumper #how to

[@mrjones9915]

Thanks so much for the video. I managed to take my bumper off thanks to your video. Mazda parts cost a fortune here in the UK - small pieces of plastic £20 and a screw £3 - daylight robbery - no wonder the insurance company decided to write the car off for what appeared to be minor damage - £1300 later, now I know!

[@DraftProject]

That's too much! Anyways, glad to hear that this video helped you out. Thank you very much! Take care.

[@photographyandphotoediting1944]

I want this bumper, how can i get this in saudi arabia..

[@karl645]

@@photographyandphotoediting1944order through a dealership

[@TwoUpTourer]

Best detailed video procedure on KZbin for the Mazda 2

[@DraftProject]

Thank you very much sir!!

[@CharlesBridgTec]

This video worked great with my 2019 Toyota Yaris iA which is the same car. Thank you!

[@DraftProject]

Glad to hear. Thank you very much!

[@stuntbounce]

Wauw thats badass man. Theres alot of hidden screws i didnt expect that

[@DraftProject]

Thanks man! Yeah, it is very complex to look at.

[@MistahHeffo]

Thanks Legend!! Exactly the front-end I needed to remove!

[@DraftProject]

Glad it helps! Thanks a lot man!

[@Tesla.Channel2024.]

Very helpful specially if you are doing repaints. Im planning to master making a bumber design

[@DraftProject]

Thank you very much sir!

[@davianlynch8467]

EXCELLENT JOB

[@DraftProject]

Thank you very much!

[@avarceia]

Thank you amazing video

[@DraftProject]

Thank you very much!

[@jankrol743]

do you think you could put on the 2019> front bumper grille?

[@kkll9753]

Hi. Do you think can I repair the leak of my wiper water tank by just removing the black part beside the tire? Or do I need to remove the bumper as well? Mazda 2 as well. Same unit.

[@SOTOALEX2935]

For everyone watching get a clip removal tool it will save you time and clips from breaking

[@DraftProject]

Agree. Thanks!

[@Khg72]

Greetings from Aruba in the caribbean, 2019 mazda 2.

[@DraftProject]

Greetings! Thank you and take care!

[@indoperfect4068]

great video. I wanna take the bumper cover off to access the windshield washer tank thats leaking, I think is a pump's oring that needs replaced.

[@DraftProject]

Thank you very much! Yes, that could be the culprit or the hose that connects to the motor might have cracks or damage. If the front end of the car has minimal collision, check for cracks on the washer tank reservoir. That can also be a possible cause.

[@gohraa88]

Hello Indo , what was the leaking of ur washer Tank , because i have the same poroblem ???

[@gohraa88]

Hello Indo , what was the leaking of ur washer Tank , because i have the same poroblem ???

[@indoperfect4068]

@@gohraa88 I still havent fixed lol

[@pablozalthen4106]

Muchas gracias. necesito cambiar el claxon y al parecer hay que quitar todo el bumper del toyota yaris r

[@DraftProject]

Muchas gracias también. Sí, es necesario quitar el parachoques si necesita cambiar la bocina. In English translation: Thank you very much too. Yeah, removing the bumper is needed if you need to change your horn.

[@C.I...]

Do you have a workshop manual for this car, or was this just applied guesswork? I'm asking because I can't find a workshop manual for the car. Also, why are the fog light housings wired up if they have no lights in them?

[@DraftProject]

Hi sir! Currently I don't have one. Most of the time we do it in our own ways. Applied guesswork hehe. It's hard to find a workshop manual since the car is still relatively new. Unlike older cars, you can find it everywhere in the internet. About the wires on the fog light housing, it is a reserved wire for the fog lights. Just like in other vehicles, you can find some harness connected without an actual unit. The fog lights for this car is optional and you can use those wires whenever you install a fog lights. Basically, you have to add more stuffs like relays and switches. Just trace the connection of the wires to make sure that you can connect it to your added stuffs and accessories. Also, manufacturers produces pretty much the same wire harness for all models, except for the higher trim models which have extra harness for added accessories.

[@jvbelarmino1052]

thank you very much! Very useful! so many bolts and clips to remove with variable sizes. Question: Im planning to replace the stock horn. Can this be done without removing the bumper? Can those black plastic covers above the bumper be removed to have access to the horn?

[@DraftProject]

Sorry for the late response. Unfortunately, I haven't got the chance to inspect the underneath of those upper black plastic covers to determine if it is possible to remove it. Even so, I would still recommend to remove the whole bumper so that you can gain more access and space. I believed that the upper plastic part are held by some plastic clips but it is not worth trying since these are delicate and hard to remove too. Thank you very much!!

[@jvbelarmino1052]

@@DraftProject thank you very much for the reply! i agree.

[@cyrilcruz4060]

Bro gawa ka naman vid ng mazda 2 skyactiv fog light bulb replacement! Hehe

[@DraftProject]

Makakagawa rin po kami niyan sir soon! Maraming salamat po.

[@ren7907]

nice video mate, just what I was looking for. Do you know if it possible to take out the chrome part from the front bumper? I want to wrap it in vinyl

[@DraftProject]

Sorry for the late response bro. Based upon inspection, there are screws at the back of the bumper. I'm not sure if that will separate the chrome part but, you can try to remove the screws. Probably there are clips there and hopefully it would separate from the bumper. Sorry for that bro, I could not assure you since its been a long time since I removed the bumper and I did not inspect the details at the back of the bumper.

[@ren7907]

@@DraftProject thanks for the info man! I am going to try that. Keep doing your videos, they are amazing!

[@DraftProject]

@@ren7907 You're welcome and thank you very much bro for supporting my channel! Good luck bro! :>

[@tarikdemir]

The chrome part can be removed. In my car, the chrome part was broken and I replaced it with a new one.

[@ren7907]

@@tarikdemir thanks for your answer!

[@jingsonlua1307]

Can you remove the headlight assembly without removing the bumper grill? Installed a led bulb in the wrong orientation and its hard to remove now. :(

[@DraftProject]

Hi sir, sorry for the late response. Actually you need to remove the bumper first because the bumper is attached to the headlight itself via plastic clip. You will see a gray square plastic piece which is locked into the headlight assembly. Also, I couldn't remember that much but I saw that the lower part of the headlight assembly is attached to the chassis. As far as I remember, it is bolted. Perhaps you can try to remove half of the fender liner and remove some parts there. Maybe that could help you gain some space for you to remove that LED bulb.

[@vSquiirTz]

Anyone know the part number for the clips that hold the wheel liner/splash shield to the bar?

[@DraftProject]

Perhaps this is what you have been looking for: Fastener Part Number: B45A-56-146A Hope this helps. Thank you!

[@typesyoutubechannel]

The fog lamp same this method

[@DraftProject]

Yes, as demonstrated in the video.

[@kenyrios4841]

Can you do a rear bumper removal of the mazda 2?

[@DraftProject]

I have a video for that. Please check the link that I have provided below. Mazda 2 Rear Bumper Removal: kzbin.info/www/bejne/Z6LOdYqHnax8e5I Thank you!

[@kenyrios4841]

Thanks alot just did mine and i didn't have to break every existing clip 😂 , keep on the good work sir .

[@DraftProject]

@@kenyrios4841 Thank you! Yup, will do!

[@RichardConnelly-rm6xx]

How to remove front bumper 1999 Ford 4.6 crown Victoria v Victoria

[@photographyandphotoediting1944]

I want this same bumper in ksa, how can i get this,,..

[@DraftProject]

Try checking at your local automotive scrapyard or perhaps on online marketplace to get this type of bumper.

[@photographyandphotoediting1944]

@@DraftProject do you have the link of online marketplace..

[@DraftProject]

@@photographyandphotoediting1944 I tried looking but it turns out to be difficult since the vehicle is still new. You can try searching on Ebay, Amazon and others. Here is an example from an automotive shop site. www.japotoparts.com/en/part/Mazda/2-/Front+bumper/15842743 Sadly, there is no stock anymore. You can try searching similar to that link. Hope it helps. Thanks.

[@photographyandphotoediting1944]

@@DraftProject okey thank you so much 💗

[@journeyman8313]

Watching this and how my front bumper fly in the highway doesn’t add up

[@RichardConnelly-rm6xx]

Remove front bumper 1999 crown Victoria

[@tay_94-y5w]

Just a bumper but there are so many bolt and clip 😂

[@DraftProject]

That's how a modern car works nowadays haha.

[@GG-eg6kn]

Get some thinner gloves man.

[@DraftProject]

Yeah hehe it would have been a lot better with thin gloves. It just happens that those gloves were the only ones I had from that time, so I didn't have that much of a choice and still, it's better than nothing.

[@illestfeedz685]

Use plastic gloves

[@DraftProject]

Sorry for that. Yeah that would be better. Thank you!