Citroen C4 P1445 The Quantity of Additive Is Above Limit. Diesel Particulate Filter Must Be Replaced

[@stevemoxon8267]

Great video again! I've had the same fault before - when it mentions the aid table click on the 'graph' button and it will tell you the quantity of additive that should be injected depending on the miles the vehicle has on the clock

[@normanstephens5391]

For me as a. "arm chair mechanic" That was very informative, as many many of your other video's are, Thanks.. 👍👍

[@arroncanfield9106]

Thanks again for the dpf cleaning

[@stephenkelly5642]

Another great video

[@ORileysAutos]

Thank you

[@dancew77]

any particular reason why you used the JLM kit and not your usual?

[@ORileysAutos]

I'm currently testing out some different types to see what has best results

[@budgiemanr33gtr]

You hardly do VNT vane cleaning in situ? Mine are fair sticky and it's overboosting a bit.

[@kelvinhopes8410]

How do you find the milwaukee compressor any good? I assume no good for air tools?

[@colinhamer6506]

when it asked for a value less than 300 and something have you figured out what it was setting the values of surly it can't be the tank level with the maximum value it asked for and I know they only calculate how much additive is left from how much we tell it we put in I've only used a snap on scanner to do this so far and the only option is to tell it it's been filled

[@jamiesmith4259]

I have had the same code on a 2011 Citroen c4 1.6 but also codes for all 4 injectors “resetting outside tolerance” any help with this??

[@jamiefoxtrot5264]

Can I ask why didn't you just buy the jlm two stage bottles because you already had the launch gun? Thanks

[@ORileysAutos]

Wasn't really happy with the nozzle on the Launch. The JLM has a cone end that seals tighter

[@ceet12]

Whats the regular dpf cleaning fluid you use? I can't remember! Thanks

[@ORileysAutos]

I was using wynns but now regularly use Launch dpf cleaner as its a better fluid

[@JoeNunes345]

Great video as usual. Would the Autel 808 have done the same job and would you recommend getting one from China, I.e, from a non authorised dealer? Many thanks, Joe.

[@ORileysAutos]

I have a DS808EU and I was told by Autel that because it came direct from them it had the same software as the bigger tools

[@JoeNunes345]

Thank you for your reply. Joe.

[@nathanreid2974]

what kit is your faivourite

[@stephenkelly5642]

Was the engine cold or hot when you put in stage one of the JLM

[@ORileysAutos]

JLM say the engine must be hot

[@stephenkelly5642]

@@ORileysAutos thanks very much.

[@lovepreetsinghhanjra1997]

Nic video sir

[@the_retired_mechanic]

Is the the milage you was typing into the scanner

[@ORileysAutos]

Yes

[@hbmihai]

What diagnostic tool is that ?

[@ORileysAutos]

Autel MK906BT

[@juliom6260]

Great video again. I have an error P1445 and motor blocked at 3000 rpm. Do I have to clean filter too or only add eolys fluid? Cheers

[@sicks6six]

give me 1980s for pinto any day over these new run clean add blue, add eolys etc engines. they don't work properly and they are putting cars in scrap yards that should still be on the road,

[@clueless6559]

Ash calculation is based on frequency of regen's versus calculated gas flow velocity , plus other boring stuff 🤐😄

[@PapiQaz]

Another awesome video