Civic 1st Gen 4x100 conversion.

What you need to know :
°This setup will give you a ridiculous negative camber
°This setup will add track width
°This setup needs a custom upper mount
°This setup requires custom drive shafts
°This setup can't work with 1st Gen Civic master cylinder
°This setup works in a hole set
°This setup has no antiroll bar in front
Parts :
°Front suspension hydraulics by Bilstein
° Front pads Ferodo DS2500
°Rear suspension hydraulics by Koni
° Rear pads OEM

[@HiroshimaSpirit]

Amazing work! I love seeing the smaller details of well-sorted cars like yours.

[@iantownsend5480]

Love the car. I've watched your clip on Car throttle so many times

[@terrancetyrell6797]

Serious conversion' there! Must have took some time to sort it all out. Props!!

[@Rob-mb1qf]

badass, I love your car man. lots of inspiration for my own miata.

[@YOURthornSIDE]

Beautiful build!

[@GarageBuiltHondas]

Love the car, great work!

[@sechsundachtzigk.3817]

I didnt saw one piece of Rust on the car 😱 Amazing!

[@MKI4EVA]

dude super awesome.......

[@luisjesus5134]

Hi, can you show the change details well, thank you

[@jesusandrade874]

d series or b series? want to get as fast as possible on as little money as necessary, thank you love the car!

[@IsaacMorales12]

Have this car all stock, what wheel pattern is it stock? Want some new wheels , 4x100? I gotta know thanks mannn

[@jesusandrade874]

was it really hard to swap your civic, I have a 2nd generation 1981 civic sedan, and was wondering what is the easiest and best swap for it

[@fernandocastellanos1345]

What flares do you have in your civic?

[@yarisTSk]

with knowing the size of your brakediscs, you prop can get you some DRILLED ones from `zimmermann`. wish you always a save ride whereever you go and really hope to meet you at the ring once !

[@PapotsGarage]

Hi thank you for the advice, but I really don't like drilled discs, specially Zimmermann ones. My brakes don't warm at all under heavy conditions, they are just fine. I like this idea "When it doesn't break, don't fix it" ;)

[@yarisTSk]

zcsb1 you are just right there and we all can see you know best what fits your car. keep up that great work. we luv it !!!

[@leroirobichaud8947]

Are all the front brake parts from the concerto? Lower arm is but is the knuckle,disc and calliper too ?? Thanks

[@PapotsGarage]

Yep, everything ;)

[@CrAzYDr1veR]

Salut! Pouquoi t'as utilisé un customdriveshaft? l'original est tros petit?

[@PapotsGarage]

C'était pour pour adapter à la nouvelle largeure de voie, et au nouveau moyeu (4x100)

[@CrAzYDr1veR]

j'ais commencé l'adaptation 4x100 derriere, normalment les personnes utilise le roulement interieur 4g et le roulement exterieur de la sb1, apres voir ton video on dirait que tu a pas utilisé léxterieur de la sb1 alors c'est seulement une piece qui pousse le roulement de la 4g sans modification?

[@strappingyounglad_9036]

what honda is your front suspension from like lower control arm and spindle/knuckle?

[@PapotsGarage]

It's from the Honda Concerto

[@strappingyounglad_9036]

so I can get those suspension components from a 1st gen crx I believe on the ef civics 88-91 the shock don't fit down in the spindle right?

[@PapotsGarage]

No sure of this such as I didn't tried ;)

[@strappingyounglad_9036]

Oh okay I was just asking to see what route I needed to go on mine you've got an awesome car and thank you for your time

[@fernandocastellanos1345]

What fender flares do you have?

[@nathanrussell473]

I love your car! I'm actually doing something similar to an 83'. I'm dropping in an F22B2 and chopping off the front to remake it with a tube frame. Here's the car imgur.com/90GNYf6 Do you have any tips on fitment or to make the process a bit easier, or is what I'm doing a whole different beast?

[@strappingyounglad_9036]

what are the front suspension components from?

[@PapotsGarage]

Front: Mazda Xedos inserts, and Honda Concerto Sleave. Rear: Honda Concerto Front Sleave and insert

[@strappingyounglad_9036]

Sorry to bother you again but i was making sure of the rear disc setup so i'll need 3rd generation prelude bracket that the brake caliper bolts to a 4th generation civic brake caliper and a 4th generation civic rotor correct?

[@jos1068]

AMIGO SALUDOS DESDE ECUADOR COMO TE PODEMOS ENCONTRAR EN FACEBOOK PARA QUE ME AYUDES EN RESPUESTAS DE MI PROYECTO