Perfect video, more daily videos please:) thank you very much.
@SITENG3 жыл бұрын
Thanks Emre! There will be more soon :)
@Ajmal6842 жыл бұрын
Nice video😇
@SITENG2 жыл бұрын
Thanks 😊 Happy you like it!
@huskodgn2 жыл бұрын
👍
@SITENG2 жыл бұрын
Thank you!!
@rasalih92002 жыл бұрын
Thank you so much engineer !!
@SITENG2 жыл бұрын
You're welcome!👍👍Thank you!
@TheMrasimqureshi3 жыл бұрын
Brilliant video Greg. There was a lot going on the site therefore they needed you to give them confidence that all is well. At least the houses will be on good footing since they are sitting on the piles. Superb video.
@SITENG3 жыл бұрын
Thanks Asim :)
@ederpereira49833 жыл бұрын
Brilliant video, I don´t know why only 22 people like
@SITENG3 жыл бұрын
Thanks Eder! I think people don't realize how important it is :)
@vicarliaedinberry1371 Жыл бұрын
Awesome video on a realistic day in the life of a site engineer
@SITENG Жыл бұрын
Thank you very much!
@fastgap1802 жыл бұрын
Wow, I m interest this. I m also a senior civil engineer with BIM experience. I worked as BIM manager too
@SITENG2 жыл бұрын
Great, happy you like the site 😁
@3dprintingdoctor3 жыл бұрын
Awesome keep it going. Good insight into the day of an engineer
@SITENG3 жыл бұрын
Thanks doctor! I will show now more from site as I am back in the game :)
@errordjarrett59393 жыл бұрын
Great video, more please
@SITENG3 жыл бұрын
Thank you! Will be more, I promise :)
@EdytaStepien3 жыл бұрын
Another great video 😊👏🏻
@SITENG3 жыл бұрын
Thank you Edyta! There will be more and even better ones, I promise ;)
@mohammadnadzreen3 жыл бұрын
informative.. goodjob. im site engineer from malaysia. very stressful work. haha
@SITENG3 жыл бұрын
Hi Mohammad! Yes it's stressful :) Thanks for comment! All the best!
@unknow-tn8fo2 жыл бұрын
Greg, how to deal with lattice plank: seting out the edge and transfer points on the slab? Thank's.
@SITENG2 жыл бұрын
What do you want to mark there. Can't you just tape after installation?
@unknow-tn8fo2 жыл бұрын
@@SITENG let's say i ned to mark some Columns. But all around there is screen protectors. So from ground floor I need to transfer points on the top of the slab, but how if the slab is not poured yet, it's only rebar.
@SITENG2 жыл бұрын
nothing there the set the targets on? maybe on the screens and each time survey them after lift for the next level. No core there? You would need a station below - pin on the slab and then set up on top (you would need an opening in the slab where your station is) It's hard to advise really if I am not there
@jordanmuir46313 жыл бұрын
Can you make a video of setting out house foundations
@SITENG3 жыл бұрын
Hi Jordan! This is the video, I was using reference line with offset having the corners co-ordinates. See my last video where I show how to bring the info into the robotic. Please follow my LinkedIn page where soon you will be able to download some drawings and than you can see the info yourself :)
@InsideMyWall3 жыл бұрын
Great videos ...Can you make a video on how you mark the top level of the beam using laser level ??
@SITENG3 жыл бұрын
Hi Rajarshi! Do you mean setting level for concrete?
@InsideMyWall3 жыл бұрын
@@SITENG Yes. Setting level of concrete to maintain uniform level.
@SITENG3 жыл бұрын
@@InsideMyWall It should be there on the video. Please check also my Setting out video nr 01 where I show the laser :)
@InsideMyWall3 жыл бұрын
@@SITENG Found out the same and it's very simple to use. Will propose to procure it in my next project :)
@SITENG3 жыл бұрын
Yeah, definitely try to get one :)
@mohsinmoroney99793 жыл бұрын
can you do a video on hd bolts
@SITENG3 жыл бұрын
Hi Mohsin! I am not doing these now, but try to show this here.
@sujithpayyanur96242 жыл бұрын
Why there is yellow cap on steel bar?
@SITENG2 жыл бұрын
Safety!! 😁😁
@sujithpayyanur96242 жыл бұрын
@@SITENG can you please do a video on site safety standards should be provided on site
@SITENG2 жыл бұрын
Hi, can't promise this one any soon, but will try to do it
@sujithpayyanur96242 жыл бұрын
@@SITENG okay 👍 thanks
@moneyavemac75052 жыл бұрын
Is a HND in civil engineering a good enough qualification to get started as a civil engineer?
@SITENG2 жыл бұрын
Hi! It's definitely enough, the most important is your attitude as this determines the pace you will learn and be useful for the company 😁 All the best, keep looking for assistant engineer, junior engineer role, you're more than ready for it, you will learn all on site👍👍
@furquan95113 жыл бұрын
Is it possible to get an apprenticeship in this
@SITENG3 жыл бұрын
Hi Qazi! Yes it is, you need to look for it though. Some companies offering 1 day a week college while working 4 days on site which is even better I think.
@thebestdeath13212 жыл бұрын
I would say get the apprenticeship at around a degree level, go college and do a civil engineering level 3 extended diploma and get DDM or DMM