CJ Lancer - How To: Install Injen Cold Air Intake (Non-VRX/GTS)

How to Install a Injen Cold Air Intake.
How to take off the bumper - • CJ Lancer - How To: Re...
Intake - stores.speedcorps.com/-strse-2...
On a 2.0L Lancer CJ - 4b11
HIGHLY RECOMMEND THE HYDRO-SHIELD TOO!
Optional 10-35mm (or similar) hose clamp is not included in pack.
Tools needed:
Flat head screwdriver
Philips head screwdriver
10mm &12mm Socket (or a variety)
Socket extension bar
Racket
Shifter
An assistant (optional)
Patience

[@NHSSHINOBI]

I have the same intake, I'm going to attempt to put it on myself, thanks for the video Edit:I used this and the booklet that was provided in the kit and I was successful, thanks again!

[@CJLancerInstalls]

its around 3-7kw depending on transmission etc. its more of a mod if you want to get the car tuned

[@goransvraka3171]

excelent video...now thats what i like a true cold air intake not the ones that are stuck in the engine bay...what about the finished product with the bumper on...did you mod the bumper too so the pod filter get maximum air exposure?

[@weshalstead]

very good vid. descriptive and so easy

[@james.k.qwerty]

Did you need to raise the car to take the bumper off / for installation?

[@CJTas87]

hey nice vid!!, do you know what the model number is for the hydro shield pre filter?, thanks

[@alexmendez7158]

Does this fit on a 2017 lancer

[@CJLancerInstalls]

YES. Totally possible, just remove the left wheel and jack the car up. A little more tricky, but easily done.

[@carldashuffler]

Can you do this WITHOUT removing the front bumper? eg: Wheel well cover removal?

[@andreshireles4062]

Is it possible to put this same air In take on a 2001 mirage I bought it with a evo 5 body kit already installed but everything else is stock, what modifications do you recommend?

[@leysonmaximiliano9792]

Who else got the same problem as me so basically when I start the car it hits like if it was on drive but like it’s a very hard hit that gives so I was wondering what that could be if anyone got the same problem lmK what can I do thank u nd btw the pipe u got it different that the one I have so ima jus see how can I add another pipe to the other one that would go to the bumper

[@Zapdeux]

you have to remove the MAF sensor from the stock intake

[@hennessypapi6464]

Does this work the same as the MY10 LANCER VR?

[@austinsgarage9573]

how much is your cold air intake??

[@artkingofwholefoods74]

How was it? Was it more fun to drive????

[@danmartinez9934]

What about a Lancer GTS?

[@antoinegittany5730]

I have the same car, however I bought a intake for the 2.4L Mine is 2.0L Does it make a difference, would it fit?

[@jaimeprado23]

Is your car the ES

[@kieranjames8529]

Your car will catch on fire

[@infamouskid691]

if any of you who are doing this have fog lights on your car dont do it the bezel on your fog lights will let any rain/water spray the intake filter making your car suck up water not a huge deal untill you have to replace your MAF sensor every time it rains or you really fuck up the engine

[@iGThomas]

does that even help, I mean the tube is so long won't cold air just get hot or bounce inside the tubing?

[@lilpatpm33]

Nj

[@bobbygarcia34]

I dont think my kit came with that sensor what dose it do ????