How To Spray: Helpful Tips Before Using Your Paint Sprayer

[@iwanawithyou]

my favorite part is 3:11 where you wear no mask, chewing gum with open mouth at outside, hoping for some small wind to breath in all the nice paint :D and then you hear the motto "spray like a pro in no time". BTW its a good video, it helpfull.

[@tracieumbel250]

😂😂😂😂didn't catch that😂😂😂to funny

[@kiahptrs]

if you have a thicker paint base you should pull your triming almost instantly so you prevent peeling!

[@Stevevan64]

Just bought a 3000 psi Wagner. This video is very good. Thanks a lot.

[@DavidSmithEverett]

This was extremely helpful. Thanks.

[@joeyysossa4144]

How much pressure were you using...for propper spray patern???

[@jmor2252]

Old video, but very fantastic instructions.

[@2318390]

Thanks for the info. It's my 1st time and this is great help.

[@user-rc8vb9zd4p]

some info for beginners helpful. cut in corners but go up an down not side to side unless u like stripes. I use graco 1095 highboy. run two guns. but rarely... I use 1221 tip or 1223 tip for Interior walls 2 ft fan hide lines. 310 or 312 green finish tips for all trim work. doors 515. exterior manly 517 side to side. but up an down for vertical running siding with a Texas two coat "back roll" I can spray a house out in one day if one person's in front of me masking windows or doors. only 2 people on job site. 2 easy days. 2 1/2 days for brand new Interiors....taking off doors an hardware, masking floors,cabinets, puddy nail holes, caulk all new trim n door casings, shoot trim and doors..reverse masking to protect trim work shoot body an then drape walls to blow out the ceiling.... easy right?

[@skessaruddin962]

Joe Spahn can you tell me that what should be the psi(pressure) needed?

[@Sms68]

Joe Spahn Joe, I am looking for a Sprayer system now without breaking the Bank. I am doing my Detached Garage which is about 16w x 20L and is Gray Wood paneling right now. Any Info on a decent system. My budget is about 200 and I have a Couple Sprayers already. Thanks Joe Scott

[@bac4998]

SMS CUSTOMS Home Depot rental. They rent top line Greco airless systems

[@awantikasharma1940]

+Joe Spahn interesting points ,if anyone else trying to find out how to spray car paint try Sovallo Auto Painting Fixer ( search on google ) ? Ive heard some extraordinary things about it and my co-worker got cool success with it.

[@Mister2You]

Do NOT "Allow for significant time for the paint to dry before removing tape from your trim". That is wrong methodology. Remove any masking as soon as you are able to do so, that way the paint doesn't dry and peel pain from the finished surface along with the tape/masking. When it is still wet, it will come off with out damaging the finished surface and the lines will still be crisp.

[@lynneacevedo6641]

Thank you! Just bought my first house...painting is some bullshit

[@niks983]

@@lynneacevedo6641 lmao painting IS some bullshit. We bought our house 5 years ago and painted everything with rollers. Now we are selling and need to paint everything white for resale....I guess people like a blank canvas and it looks bigger. I'm buying the 200 dollar harbor freight sprayer and not fuckin around this time.

[@beautifulbritishcolumbia7655]

Agree 👍

[@jepp0711]

Exactly.

[@jeagle215]

I've been spraying about 7 years now and can never get a pattern that nice. I've tried different tips, thinning, different pressures the lot. Even after full services. I have a 495 pc pro.

[@dirkmcgirk11]

That’s because you aren’t a painter sir

[@jeagle215]

@dirkmcgirk11 what a ridiculous comment. I've been a painter for 24 years. Self taught at spraying like most but I struggle with it sometimes. Maybe offer a bit of advice instead of being a wanker.

[@sarorra]

Excellent instructions! Thank you!

[@jazzman1626]

Very good tips,thanks. I am about to spray paint my house exterior. It's just a bungalow, thank goodness lol

[@TheHouheightskid]

Hey Jazz Man..... How did the bungalow spray project turn out?

[@jazzman1626]

Mike Anderson Sorry, I chickened out. I will get to it this year,though. I decided our bathroom needed refitting instead.

[@danallansarthou7]

Always use straight for even coat?😁

[@justinandmistydevinaspre7696]

What to do about splatters coming out when spraying?

[@herbratamoeljo5076]

To achieve the air pressure correctly, we can adjust the air pressure control gauge and reading the number on it. To achieve the width spread correctly, we can adjust the spreader adjustment valve and measure how width it is (by inch or cm). To achieve the correct distance between gun and the surfave, we can measure it (by inch or cm). But how to achieve the correct fluid debit or velocity? What is the best indication / direction in adjusting the fluid control and how to know if the volume of the fluid's spray is right and properly? (whether is too much or too little?)

[@-thefalcon-]

I got a coworker who is gonna love this video

[@prashantthanait8479]

Where i bye this machine in the qatar?

[@satyanarayanareddybommared3052]

can i paint to my home with the sprayer

[@ramvachal7825]

please tell me did the gun used comoresor

[@cjspray]

Several people have asked about the model in this video, they do not show enough of the sprayer to identify. It is likely an X7 as people mentioned, but this video is meant as a general video to apply to Graco's line of Magnum sprayers.

[@drosky310]

the best explanation on a subject on youtube answered many questions , thankyou

[@lauraferogiaro5782]

what Graco model sprayer is this?

[@shahidrizwan358]

plz tell how can i purchase this spray gun.

[@eamonodwyer6747]

Is one coat enough should I cross coat on my interior walls

[@cba8351]

Nope minimum is 2 coats to have a better finish

[@skessaruddin962]

Joe Spahn can you tell me that what should be the psi(pressure) needed?

[@chriskline8012]

I like how right after they say dont angle the spray gun the guy is angling the spray gun while hes painting

[@chelaash]

Exactly they contridicted them selves they suppose to angle their gun

[@cubamarci4320]

Lols

[@mirooovuujjj7918]

Where did you bay spry the gun?

[@randallwildschut9287]

I LIKE TO bay one we're can l Bay one

[@terryblack5970]

Good Video...Thanks...Very Helpful...

[@mohamedismailsaleh]

how can I know the thickness of coat I sprayed,for example in some data sheets they recommend you to spray 35 micron .. ,so when can I stop and say that this is enough

[@jacobmoreno901]

Mill guage you can get those at sherwin williams..

[@duaneschul5990]

Jacob Moreno wet mil gauge

[@gopalsewag8842]

Kha milti h machin

[@jayakumarg802]

Is this enamel paint or is it white/colour wash content.

[@ravitrinisha5346]

Price

[@ricardodouglas3872]

what thi is modelo ? xr7 ?

[@mrbomberman89100]

What model did you use?

[@remabegum9772]

Hi how much is this machine in pounds plz?

[@YiftachC]

thanks man Ididnt know how to do it

[@SukhwinderSingh-ly2sx]

es ke Kiya keemt hai

[@blackcat49345]

Very useful. Thanks

[@Imtiazali-565]

How can't I get this machine

[@sergejuscernauskas]

is it enough 24L air compressor 2.5hp 9.5 cfm to paint a house?

[@cjspray]

We would not recommend it. You need at least 12-15 CFM at 40 PSI, and even that is low if you are painting a house. Our toll free number is 1-888-257-7729 (Monday-Friday 8am to 5pm CST) if you need any recommendations for your project.

[@ericwatters8356]

cjsprayinc

[@bmitsuca]

Does anybody knows the price for a.cheap spray gun ??? It would help a lot

[@user-rc8vb9zd4p]

Mitsuca Benoit 200 bucks for a graco contractors series.

[@ericinxenia]

Thanks. Nice video.

[@DirtyJobsGuy1]

Great Video!

[@Davyboi1690]

My pressure isjnt good how do I fix it it's up high

[@ionutionut2311]

You need a regulator installed near the handle

[@abmohd9470]

where to get this spray? i m doing house painting?

Are not sure if you're doing house painting? Why the question mark?

[@haniefharun]

Harã Ferraz 🤣🤣🤣

[@vijaydahel6437]

Praej Keya.hy

[@orbiebibbee977]

The fan should always be horizontal.

[@mirooovuujjj7918]

Grate video

[@chaoschief]

very educational!

[@wing1wing2]

THX

[@vapidRush]

is there a price point recommendation or a brand. I have seen some at HD but do you have suggestion?

[@sivanandadas4761]

Thankyou sir Thank God

[@juliabarton5753]

The spray can using the knockdown method

[@ricardodouglas3872]

model?

[@FrostTheMonarch]

Great thanks

[@rajcontacter9556]

Hi mujko msen cahey

[@wowcompany]

good job

[@marcostecpa5726]

Cómo limpiar

[@BloodTar]

@MrDuncmck Agreed. Painting contractor, 19 yrs.

[@Maxkil]

BloodTar agree painter 10 years

[@jay007007007]

Thank you

[@brianbaxter7782]

Question..I'm painting inside a warehouse,half the walls are block,no problem,but the other half is new board,which I already primed. The paint for the 12' walls is semi-gloss finish. How do I spray,so that it doesn't look like ass....Do I bankroll the semi-gloss? I think no...I will just make worst. anybody's advice much appreciated

[@zonedout5998]

Instructions are on point. People actually painting in the video do not flex their wrist. 🤦🏻‍♂️

[@SlotsMyThing]

Lol I spray commercial vehicles for a living and always seeing what techniques are out there but you can't use this because all the overspray will build up on the edges if you don't flick your wrist outwards to avoid overspray build up

[@dovahzoh]

He said that in the video multiple times

[@leoncaldwell5551]

DovahZoh lo 99k9 Lolol 9kkmm l.p. l.p.

[@toddcrews3284]

at 2:54 to 3.00 minutes

[@kvamontjosefk.9321]

Graco?

[@MrDuncmck]

hasn't any of these instructor vids consider the idea of back rolling interior smooth walls.a drywall or plaster job is only as good as the paint job.plaster/drywall contractor 35 years.

[@Maxkil]

MrDuncmck hey mate, 100% agree ! I have some drywall and paint spraying videos, one video, there are so many people criticising me for back rolling, some people are oblivious to this.

[@brettlott570]

Ok so I'm not that off when I told my dad I should back roll the walls after the sprayaing just to blend or get any holidays.

[@bettymiss5158]

great

[@djlifelike]

good video thanks

[@killabee623]

I see the pros flicking wrist and not releasing..

[@matejskobalj6791]

I have spent months studying spray painting and found a great resource at Magic Painter Method (google it if you are interested)

[@darksbacon5856]

You want a respirator not a dust mask this is for safety not annoyance

[@collectionvideos3590]

perfect paint your contact pls...

[@elephantgrass631]

Dude.... CGI @0:37 lol.

[@mikefalcon1]

And a cheap one as well.

[@nayebkhishavand5064]

عالی

[@eduardotomfort]

Please, distribuidors Brazil, City. Tanks.

[@PotrabukChanel]

Like'4,8 juta....

[@wanelly]

Why I’m I still using a brush and a roller? Aaaaaaaaahh...

[@syed5392]

Trying paint on the wall???

[@gopalsewag8842]

Hy

[@kanarimentos7056]

i buy this machine but i dont like.t to much strong and dripping other machine i have is very good

[@SaintMikeCole]

and what is that machine?

[@kanarimentos7056]

Sean Cole C800879 Power-Flo Pro 2800

[@chandiuk85]

Kanari Mentos can you suggest me which sprayer is better. Because i am using wagner at the moment but its not really that good

[@dirkmcgirk11]

This dude is killing me. Spraying is an art. You, sir, do not have it. Stay tuned folks. I’m going to show the world how this is properly done and get rich doing it.

[@cjspray]

If you have any general of specific questions on spraying, feel free to call us at 1-888-CJSpray or email customerservice at cjspray.com - we offer FREE technical advice and assistance should you have questions or run into problems.

[@badalsawantdessai4489]

How can I purchase this spray gun in Goa India🇮🇳

[@purpleflower8260]

the guy paint wrong he moves his hand not arm

[@osamagad1710]

I am founder of new company specializes in airless painting machine.we would like to send for you painting machine to be tested please feed us back about the machine. If you like the machine we would appreciate to make special KZbin video about it.

[@priyasachdev7781]

ee

[@toddcrews3284]

x5

[@MBSK-xw4ff]

★★★

[@ঢাকা1]

b

[@fasi-ur-rahmankhan4477]

V

[@brenthill5596]

wtf..this video is how not to spray. must be the camera guys assistant spraying. spray from one end to the other without stopping so you don't have holidays all over the wall or that garage door.

[@duaneschul5990]

duaneu- dude you should always trigger your gun so you pump catches up, even if you have a great rig it will prevent wearing out your airless but we have occasions when you have long strokes but doors or cars you know.

[@shawnmccollum3920]

DirtyBanditabl e

[@justbone21]

There are so many errors made in this video it's not even funny.

[@19perception83]

What are they please? It's not helpful saying that then not pointing out what they are.

[@chelaash]

Well plenty my husband sprays for living and actually is showing me. He always told my to spray keep it consistent not making so many different strokes. Examples up and down. And that's all this video he spray everywhere that's going to look blotchy. If it was out side then yeah you can do horizontal because depending on the crackes or details of the song or garage doors but just where you see the crack and continue to spray up and down. And the removal of tape should be removed like a couple minutes after not to long but if you do decide to wait to can pass the putty knife or a box cutter to where the line meets the tape and then slowly peal the tape away from where you paint not towards .

[@bmitsuca]

Does anybody knows the price for a.cheap spray gun ??? It would help a lot

[@hayderxyz0]

Thank you