HOW TO USE A PAINT SPRAYER LIKE A PRO

Learn how to use a Graco Magnum X5 paint sprayer.
Sign up for the email list. Grab some great tools and supplies while supporting the channel @:
www.caliber8.com
Best picture hanging tool:
www.exactac.com
#Caliber8Tools #paintsprayer #graco

[@giancarloteoli6879]

No muss or fuss in the explanation. Straight to the point. Explained very well with good camera work. This was exactly what I needed to get started. Thank you. Actual painting time is only 10 percent of the job. Prep was what took the longest.

[@Caliber8Tools]

Right about the prep time.

[@NFRG-SlinkyMontana]

Frfr tho

[@nottoday611]

I'd rate this one of the best KZbin instructional vids I've ever seen. Precise, concise, no fluff. About as close to a bullet point list as it gets. Thank you!

[@Caliber8Tools]

Glad it helped. Thank you.

[@Urpoolboy59]

Gotta agree with everyone else. Straight to the point, no story telling or excessive yapping. I'm buying the same sprayer tomorrow and just happened onto this video. This Gentleman should be doing how to video's for a bunch of products. This is how it is done! Thanks 👍

[@Caliber8Tools]

Glad it helped.

[@lovetrump1088]

Just don't move your spray gun like he did at 9 minute mark...he has a Horizontal Pattern as pating comes out his gun and is also moving his hand back and forth Horizontally (left to right and back) which is totally wrong, you can never spray like that. To Paint correctly, with the pattern in the gun coming out from Side to Side...you move your hands UP and Down and then you can get coverage and overlap your spray properly. This is good breakdown of the product (must be sponsored) but this does not show how to paing properly at all. He could have watched any of hundreds of other videos to who how to do that. Vertical Pattern from Gun - Move hands Horizontally Horizontal Pattern coming from Gun - Move hands Vertically Always move against the spray pattern not with it!

[@awhite55grands]

Can’t tell you how much I appreciate this video. I bought the machine, but thought about returning it because it’s intimidating! 🤯 Didn’t want to fail with an expensive machine. Even the dang owners manual nearly scared me off! 😮 😅 But you broke this down so completely, I’m about to tackle this thing with confidence! Thank you so so much!! -Angie

[@Caliber8Tools]

Hey, glad it helped. You will be fine.

[@lurklingX]

this was me, yesterday. i was just staring at the quick guide and it's like i couldn't read. even that guide left me with a few questions and i was trying to go between it and the book. like WTF is xyz part????? the hose adaptor isn't even called out on the parts list, and they act like they provided a cleaning brush but didn't. then there was the worry about wasted paint, and issues during operation............ UGH. here's me still cleaning up at 3AM.

[@abdullahshaik4784]

I got it in yard sale for 100$ not sure how to use it this really helped . But I have to say still so many steps to get this machine just to start the painting wish they made simple machine for basic home projects.

[@hospitaladministrator3359]

Let’s go Angie! How’d did it go?

[@Matthew-su5ho]

Very helpful, thanks for the video.

[@AndreanoCelentano]

Great vid! Also, try spaying on the cardboard first. If gun drips - increase pressure, if you see two lines on the sides of the spray pattern and not enough paint in the center - decrease pressure!

[@Caliber8Tools]

Thanks, great tips.

[@rodolforubio706]

What is pressure with latex what is approximate sqft per gal thanks

[@DarbyEvents]

I had a horrible first experience with this product. Almost returned it and watched your video and you made this is so easier for someone with ZERO clue. Thanks for taking the time to make this video. New sub here!

[@Caliber8Tools]

Glad you didn’t give up.

[@ValricoRex]

Graco should contract with you to do their product videos. Very professionally produced video, straight forward explanations without the cringe-worthy attempts at humor and goofing around so many youtube "instructors" do. Looking forward to seeing what other videos you have made. Thank you for all the effort that must have gone on behind the scenes to put this quality of content out there.

[@Caliber8Tools]

Appreciate that. Thank you.

[@MrNonDescript01]

I came into the comments to say that very thing - such a well-done video without a lot of fluff.

[@speedyali764]

subscribed as well.

[@prof113]

I was thinking the exact same thing. So clear and concise.

[@islanddreaming8591]

I was going to say the same thing to @ #Caliber8Tools myself .., i've never seen a tuition video before that was done more clearly, precise, and straight to the point as this was done. Great effort Man, there's a professional career out there waiting , needing , and begging for people like yourself 👍

[@Shy-807]

Thank you for this video! Easy to understand for a beginner like me. I’m thinking of buying my first sprayer to start painting my kids’ bedrooms. Your instructions were very thorough, simple and direct. Glad that you emphasized the safety aspect as a lot of people tend to take it for granted.

[@Caliber8Tools]

Hey, glad it helped.

[@Mike-wh9dq]

Great job ! A 'newby' such as myself really appreciates all of the detail and time you took to make sure we understand the unit. Thank you so much !

[@Caliber8Tools]

Glad it helped.

[@kevinmellander4972]

I loved this tutorial! I will be using a Greco for the first time to paint the interior of our home and this was extremely thorough and easy to understand. Thank you!

[@Caliber8Tools]

Glad it helped.

[@sueyist]

Just bought this sprayer for my house. This is the 3rd video I came across to help with the set up and how to use it. Hands down the best. The other videos didn't even go over the buttons/knobs on the machine. This was The paint sprayer for dummies video that I needed. Thanks a million

[@Caliber8Tools]

Glad it helped. Appreciate the feedback.

[@kenwalsh686]

Excellent video! Everything was well explained and easy to follow. I used this sprayer for the first time today and followed the steps you outlined here. I’ll definitely have to check out your other videos too. Thanks for posting.

[@Caliber8Tools]

Appreciate you. Glad it helped.

[@lothar34]

Great vid. Used my x5 for the first time today. Very good results. It might be helpful if you made another video on the cleanup. I cleaned all my individual gun parts just like you, but the part of the procedure w/ the garden hose attachment is the only thing that tripped me up a bit all day and I found myself having to read that section of the instructions over and over.

[@matheush1036]

Do you recommend x5?

[@johntate8989]

Fantastic job! Thanks so much! I’m much more confident after watching this video. Others haven’t been as concise. Thanks again and bravo!

[@Caliber8Tools]

Glad it helped. Thank you.

[@earthangel428]

Agree wish I had found this before watching so many other videos

[@Sonicboom659]

Dude this is far better than Graco’s tutorial. Thank you

[@Caliber8Tools]

Appreciate the feedback. Glad it helped.

[@poopsandwichessss]

I wish there was a comprehensive video like this for every new piece of equipment. Thank you!

[@Caliber8Tools]

Glad it helped.

[@JGFowler121]

Awesome detailed explanation!!! You crushed it, best one I have seen to date. The tempo of the lesson was perfect 🥇🏆

[@Caliber8Tools]

Thank you. Glad it helped.

[@danielcielmaee3642]

Definently. The cadence you speak at is very easy to follow and understand.

[@StupidTeenageVideos]

By far the best tutorial I’ve seen on KZbin!! Great job!!

[@Caliber8Tools]

Thanks, appreciate the feedback.

[@Dakingsnake]

This is the most thorough and comprehensive KZbin tutorial I’ve ever seen. Saving this for when i buy my x5 tomorrow

[@Caliber8Tools]

Thank you glad it helped.

[@AncoraImparoPiper]

The clearest and concise instructional video on this sprayer I've seen so far. Thanks for sharing!

[@Caliber8Tools]

Thank you. Glad it helped.

[@Frrrrrunkus]

Great video Man. So descriptive and thorough. You’ve given us confidence to purchase a paint sprayer.

[@Caliber8Tools]

Glad it helped

[@TheBlueScarecrow]

Great video; great instructor. Gets right to the meat of the thing and leads you step by step through the process. My first job is coming up... Thank you so much!!!

[@Caliber8Tools]

Glad it helped.

[@lkylky1730]

Great! Great!! Great!!! The kind of material that is usually poorly presented by many others, is so well simplified here by this great teacher. Thanks for job well done🙏🏽👍🏼✊🏽

[@Caliber8Tools]

Thank you. Glad it was helpful.

[@lkylky1730]

@@Caliber8Tools ....thanks, and I did subscribed too. ...but please click one thumbs up for my comments too.😁

[@natejenkins786]

Greatly appreciated, I've had my sprayer for 2 years and frankly I was afraid to mess it up or waste a lot of paint, but I think I'm now ready to paint my kitchen cabinets.

[@Caliber8Tools]

Glad it helped.

[@sunshyne8689]

Just purchased this sprayer and I’m so glad I came across your video. I was worried about not cleaning it properly

[@Caliber8Tools]

Glad it helped.

[@trompae.a.7124]

The price is that spray machine

[@achebe171]

I know its expensive but have a sprayer for any non waterborne finishes and one for waterborne. That's what i do with sprayers and my hvlp too. And honestly waterborne is so good and for the most part easier to use that it hust makes sense to only use waterbase stuff... so just maoe sure you rinse with plenty of water amd if you want extra protection use pro clean pr lacquer cleaner from sherwin williams then rinse more with water. And remeber the tips do have a life of a few hundred gallons.

[@RB-hj7qc]

Excellent explanation with perfect camera angles that let me see everything clearly. If there's one thing people don't do right is the camera angles and lighting. Makes such a big difference to the video quality. Now I feel much more confident using my new sprayer.

[@Caliber8Tools]

Glad it was helpful to you.

[@briang2981]

Agreed! Very well done video

[@mikedkc]

Great job. No useless background music, just a clear, concise demonstration. Thank you! Subbed.

[@Caliber8Tools]

Glad it helped.

[@desigamingworld2565]

One of the best video I have watched about paint sprayer that’s how you explain to the beginners heads off to you boss, deep and attention to details. Not everyone can explain like this only the smart ones. Thank you.

[@Caliber8Tools]

Thank you. Glad it helped.

[@bluesbrother2383]

It's amazing that Sen Dogg from Cypress Hill is doing paint sprayer tutorials lol

[@dennissorensen8765]

...and would you imagine that this part of his work is not even mentioned on his Wiki-page?!? 🤦🏻‍♂️ 😄

[@josem971]

@@dennissorensen8765 P I

[@Witchdoctor39]

Wakanda meets Graco😃

[@beetee801]

Lmao. This had me on the floor.

[@paulstrawbridge5687]

Had no idea thats who he is...but when you've been in the remodeling game for awhile you may find that the most herb-tokin dudes at the job are the paint crew...haha, so to me it adds up. Ha.

[@ChrisNieves]

Great video for setup, priming and cleaning. You should’ve touched little more about the spraying part and adjusting your pressure even just for the normal 515 tip after the priming section. Some folks may just use your video and have spray problems because they are still in start.

[@Caliber8Tools]

Thanks

[@jourijackson4324]

Thank you, this was extremely helpful. my dad got one never used it, now I’m feeling pretty confident to use it myself

[@Caliber8Tools]

Glad it helped. You got this.

[@JC-lf8pr]

Absolutely the best X5 paint sprayer video for newbies! Thank You!

[@Caliber8Tools]

Yeah for sure.

[@frankiero2367]

What a great breakdown. Very easy to follow. "Thank you" for the step by step details.

[@Caliber8Tools]

Glad it helped.

[@larrymitchell1628]

Good video overall. The guard on the gun develops the spray “fan” pattern, depending on its orientation. The hose end valve supplied is designed to facilitate using water to flush out the system once done painting, versus running the pump. I find that flushing with water does a good job of clean up except for the tip and guard, as well the inlet screen. I find that using a a portion of discard panty hose, secured by a nylon tie strap over the inlet screen eliminates a lot of sprayer issues due to dirt or debris. Thanks for your good good effort.

[@Caliber8Tools]

Great tips thanks.

[@DevBone42]

Excellent video! Simple, but detailed, step by step logical progression of info on the use of this machine. Much appreciate your time in putting this video together!

[@Caliber8Tools]

Appreciate the feedback. Glad it helped.

[@khosrowmkh2554]

For someone who loves to paint .this was the best video, I saw on paint spray. thank you

[@Caliber8Tools]

You’re welcome. Glad it helped.

[@retf054ewte3]

perfect video: he talks clearly, slowly, no rush, no background shitty music. 👍

[@billnope7840]

Good video until you started spraying the wrong direction. The spray gun has a fan of about 10 inches wide. You make you passes the OPPOSITE direction of the fan. Your initial hand passes should have been up and down, NOT left to right.

[@theanonymoustrader6852]

😂 I was disappointed as well

[@neiltrenholm2949]

Can you explain more

[@billnope7840]

@@neiltrenholm2949 The spray gun sprays the paint in a very narrow rectangular area, say 1 inch tall and 10-12 inches wide, depending on the angle that one holds the sprayer. One could hold the gun such that the rectangle is 10-12 inches tall and 1 inch wide. Typically one holds the gun so that the rectangle is more wide than tall and the movement of the gun is up or down, usually down. This covers a large area quickly. One could hold the gun such that the rectangle is more tall than wide and THEN the movement would be left or right so that the covered area again is large. In this last example, one would NOT move up or down. That would result in a very small area covered with FAR too much paint and almost certainly result in dripping.

[@lynetteyoung9777]

Your explanation was perfectly thorough. Your voice was clear and easily heard. Thank you.

[@Caliber8Tools]

Glad it helped. Appreciate the feedback thank you.

[@Icyrails12]

This is the BEST instructions on this paint sprayer that I have found on KZbin. Very clear instructions. Thanks so much!

[@Caliber8Tools]

Glad it helped.

[@markwatson2006]

Caliber 8: Where have you been for all of my DIY stuff?!? Great instructions!

[@Caliber8Tools]

Glad to help.

[@paulhumpal8015]

I bought this spray gun last year but have been intimidated by it. Thanks for the video. I will be finally using it next week to spray the interior of a 2100 sq ft house. Super explanation!! Blessing to you!

[@Caliber8Tools]

Glad it helped.

[@ChubbyUnicorn]

very happy I saw your video. there is A LOT mote to operating this machine than I could have intuitively figured out. clear, concise instructions.

[@Caliber8Tools]

Glad to hear it.

[@robflorez4657]

Thanks for this video. Just got this sprayer and this is the clearest explanation I’ve found yet on how to use it.

[@Caliber8Tools]

You’re welcome. Glad it helped.

[@rodb115]

Perfectly explained, even a year after the video was released! Thank you!

[@Caliber8Tools]

Glad it helped!

[@ytpg7]

I agree with all the other positive comments - top notch explanation! Buying the same sprayer this week to do my very first spray painting job. Will do the walls and ceiling of my newly renovated 1700 sq ft house - plus the primed doors, window casings, and baseboards - so this video is custom made! Thanks! Brilliant! I liked and subscribed instantly!!! 😊

[@Caliber8Tools]

Glad it helped. Thank you.

[@keithp115]

I received a Magnum project painter plus for my birthday. Your tutorial is by far much better than the Magnum website. Thank you sir for making me more confident when I am ready to paint my garage doors!

[@Caliber8Tools]

Glad it helped.

[@jsmythib]

Bought it. $279.00 Prepped on the info here. Thankyou! Sprayed a complete 2br apartment, all rooms, ceilings,walls,kitch,bath,dn, one color...in less than 2 hours(8'ish gallons)....It payed for itself on the first job. With standard home depo white it can lay on enough paint to drip quickly if your dont keep moving. I can also quickly roll out a wall after spraying if I need to and its wet enough. Cant say enough good things about it. Priming and cleaning, also easy. My first time spraying anything other than a paint can.

[@Caliber8Tools]

Great job. Glad it helped.

[@CraigMathison]

Thank you so much for such a thorough and methodical approach to this subject. You are a great teacher!

[@Caliber8Tools]

Glad it helped.

[@learningcoach1]

Great video , love it ! i forget to put the drain tube and the suction in the paint together when spraying thanks for showing that!

[@Caliber8Tools]

No problem, thank you.

[@InsanePandaWanderer]

Thank you for the good explanation. I used to work in apartments and our make ready guy would always have trouble with this machine. He never cleaned it properly and it would always clog up, I still remember him kicking the machine in frustration losing his mind. I only had to watch this video to learn more than he ever knew.

[@Caliber8Tools]

Lol. Glad it helped.

[@johnclowes3894]

Great vid bruv. Easy to follow and close ups spot on. One thing I was told by a sprayer was he cleans his sprayer by putting hose in either a bucket of clean soapy water or turps/white spirit and flushed it through till only clean water or white spirit come out. Apparently it’s a lot quicker and without risk of loosing parts or damaging them. I’m a roller and brush guy myself. Old school as you say so what do I know.

[@Caliber8Tools]

He’s right. Glad it helped.

[@frankwalen7236]

Watched several videos. Just bought this sprayer. Your instructions exceeded ,all the other videos combined. I'm a GC & am making a couple of my workers watch this video in the morning. Compliments. Very thorough & EXCELLENT VIDEO. SUBSCRIBED!

[@Caliber8Tools]

Glad it helped.

[@lillithjones993]

Thank you for the video. I have used my Magnum 5 before but it’s been a few years and I forgot what to do so you’re helping me remember

[@Caliber8Tools]

Glad it helped.

[@edge2science]

Thank you for your straight forward and clearly spoken tutorial. Easy to follow great job!

[@Caliber8Tools]

You’re welcome. Glad it helped.

[@JayBeaSea]

Thanks for the no-nonsense instructions! Great job, and much appreciated.

[@Caliber8Tools]

No prob. Glad it helped.

[@raydavis4446]

I've watched alot of videos about this topic. Everyone forgets to tell or show you something. This is the most comprehensive video I've see. Craco definitely should give you a job

[@Caliber8Tools]

Glad it helped.

[@patrickshoe489]

Concise instructions and excellent step-by-step instruction. I'm new at this and because this video is go good, I'll be watching and doing at the same time.

[@Caliber8Tools]

Glad it helped.

[@juanmagonza43]

Thank you for making this setup process very easy. I’m going to paint my house with Graco sprayer.

[@Caliber8Tools]

Glad it helped.

[@whatfreedom7]

I borrowed one of these from a friend. I thought it was easy to use even for me never having used one before. I had great results on my paint project. Just make sure you flush it out and put the treatment in it when you’re done.

[@theoldieswarehousegk1089]

This was one of the finest how-to explanations I have ever seen. Well done !!!

[@Caliber8Tools]

Appreciate the feeback. Thank you. Glad it helped.

[@catherinefreure7083]

What an awesome, detailed tutorial!! Thanks so much. You have taken all my apprehension out of what I'm painting 😊

[@Caliber8Tools]

Glad it helped.

[@scottviola6844]

You did a great job! I feel confident using my paint sprayer now. Thanks

[@Caliber8Tools]

Glad it helped.

[@pf5658]

Thank you sir for the well detailed info. I just recently purchased this exact model myself. Have not used it yet so this should help a bit.

[@Caliber8Tools]

You’re welcome. Glad it helped.

[@MidnightHabit]

I've watched a bunch of these. Yours explains things more thoroughly than any of the others. Well done.

[@Caliber8Tools]

Glad it helped.

[@armandomilton7645]

Modern equipment, but a lot of work and waste of material

[@ronstull9072]

this is without a doubt the finest paint sprayer vidieo i have watched. thank you very much

[@Caliber8Tools]

Glad it helped.

[@rebelgrunwald]

I have the X5 but have not used it for a while. This was a great refresher explanation in a very simple form. Great job!

[@Caliber8Tools]

Glad it helped.

[@mbruce4152]

nicely done. I'm going to save this video and watch it again right before I start. very efficient explanations, no wasted time watching this vid.

[@Caliber8Tools]

Glad it helped. Thank you.

[@mosaicolu]

thanks for the easy demonstration of the air paint sprayer

[@Caliber8Tools]

No problem, glad it helped.

[@greggardner2042]

I just bought this sprayer! Thank you for a thorough detailed explanation. I am more confident going forward. Thank you!!

[@Caliber8Tools]

You’re welcome. Glad it helped.

[@greggardner2042]

@@Caliber8Tools Quick question, that “nut” assembly for the spray guard, how much do you need to tighten it? It seems like hand tight, but I want to be sure. I checked the book and it did not address it.

[@mskimrn9636]

Excellent video- you made it simple and easy to follow. I am buying one but I was a bit worried it would be too complicated- not any more. 😊

[@Caliber8Tools]

Thanks, glad it helped.

[@curtdogwinslow3517]

Have to say you were very thorough except as to what to do with the hose . Enjoyed your video thanks

[@Caliber8Tools]

Glad it helped.

[@johnnypham3410]

That was an awesome video. I just got my Graco, model the same one you have. We are going to painting the outside of our house soon. Thank you very much for the great tips.

[@Caliber8Tools]

No problem. Glad it helped.

[@queeny8510]

The video really helped me! I was able to complete a big DIY project thanks to your detailed information! Thank you

[@Caliber8Tools]

You’re welcome. Glad it helped.

[@itsjiraheta]

Thanks for the time and effort put into this video. I can tell you were doing both the filming and the manuvers. It takes a lot of effort. Kuddos to you my friend.

[@Caliber8Tools]

Appreciate the feedback. Thank you.

[@send2karthi]

Very clear and the sequences of steps are easy to follow. Thanks for the video.

[@Caliber8Tools]

You’re welcome. Glad it helped

[@user-qh9on3qc2q]

Great step by step explanation! No small talk. Thanks for the video

[@Caliber8Tools]

Glad it helped.

[@kelvinlewis2909]

You just helped me finalize the decision to purchase. Thanks so much!

[@Caliber8Tools]

No problem. Glad it helped.

[@des2345671]

Very impressed with your delivery ordering one after your tutorial.

[@Caliber8Tools]

Glad it helped.

[@SixxiePlays]

Wow wish I would’ve seen your video before I used my sprayer. Thanks for the many tips that I will now implement the next time I use sprayer. I had no idea about the vertical and horizontal nozzle aspect. A friend kept buying the different flow nozzles because his sprayer kept clogging now I can suggest he check the filter in the handle.

[@Caliber8Tools]

Glad it helped.

[@DavidMcMinoway]

Thank you sir!! This has to be the best and easiest to understand tutorial on how to use this spray gun.

[@Caliber8Tools]

Glad it helped. You’re welcome.

[@alphaviews4639]

This was the best instructional video online. Thanks

[@Caliber8Tools]

Glad it helped.

[@barnyardrose]

Awesome instructional video. Thank you!

[@Caliber8Tools]

Glad it helped.

[@ekhoromeo]

Excellent product introduction! Now I can go buy mine with confidence 😎

[@Caliber8Tools]

Thanks. Glad it helped.

[@edwardpietrouski5039]

Best explanation on how touse the graco x5 sprayer.

[@Caliber8Tools]

Glad it helped.

[@christarmey6398]

Great video. Very descriptive and helpful. Realistic and I appreciate that. I wish I was able to see the finished product.

[@Caliber8Tools]

Thank you. Glad it helped.

[@franktirado8357]

Glad I viewed your well detailed demonstration on a sprayer. I’m planning on painting my exterior stucco home. I’ve seen professional painters follow up with a roller I was wondering if this was common when using the sprayer also I know that there is a lot of prep work to protect other areas from overspray.

[@Caliber8Tools]

Yes, back rolling after spraying helps the primer stick and reduces raised spots. Prep work takes longer than the actual painting but you can’t avoid it.

[@hospitaladministrator3359]

Thank you for this super thorough video. I feel like I actually know how this thing works now. Great instruction.

[@Caliber8Tools]

You’re welcome. Glad it helped

[@wtcbd01]

Incredible job. Thanks for the information.

[@Caliber8Tools]

Glad it helped.

[@naydapineda7478]

Perfect and simple explanation,thanks

[@Caliber8Tools]

You’re welcome

[@NTSHMA]

Great video, really. Even as easy as you made it look, I believe I will keep using a roller on all my jobs. I can't see cleaning that thing after each job.

[@Caliber8Tools]

Understand. Time is precious. Thanks.

[@SteveBellefontaine]

Great Video...Thank You....I just bought one of these off Amazon. Waiting on delivery so Figured I get a head start and research it and the operation of it.....cheers

[@Caliber8Tools]

Thank you. Glad it helped.

[@synchronisticmelanatedmysitic]

Best Video on paint sprayers on KZbin

[@glashse98]

I needed this tutorial. Your explanations were concise, and I'm now ready to get started. Thank you!

[@Caliber8Tools]

You’re welcome. Glad it helped.

[@temprmj1]

Very easy to follow. Thank you.

[@Caliber8Tools]

Glad it helped.

[@danidunn2640]

GREAT VIDEO, Thank you...very clear and precise....I'm spraying like a pro now!

[@Caliber8Tools]

Great!

[@DannyGood-ku7qj]

Nice clear and precise!! Very helpful

[@Caliber8Tools]

Glad it helped.

[@todddavis3906]

Solid job, better explanation than the manufacturer!

[@Caliber8Tools]

Thank you.

[@daveferrell1137]

Great instructions!! Thanks!

[@Caliber8Tools]

Glad it helped.

[@billytoddwisepenny4283]

Thanks. That was a great instructional video....I envisioned spraying In the wavy with the wrist technique, and would have been the wrong way. Thanks so much.

[@Caliber8Tools]

Glad it helped.