Clean your RV roof and add LEAK protection with ETERNABOND tape!!

See how I clean my very dirty roof and use Eternabond Tape to add leak protection at critical spots! Stay until the end to see side by side comparison.
Heres a link to my 1 year review of the Eternabond Tape : • Eternabond Tape 1 Year...
Thanks for watching! Please consider helping this old man out by subscribing. I would REALLY appreciate it.

[@warrenmullett]

Looks great definitely breathed some new life into the roof !

[@NINEPOINTFIVEPROJECTS]

Hi Warren, Thanks for the comments and watching! Yeah it doesn't look that bad considering the age of the RV! I've seen the guy you mention in your other comments and you're right he knows his stuff! Either way I do appreciate you watching. If you have'nt done so already, please do me a BIG favor, hit the like button and subscribe please. As you can see I'm a pretty new KZbinr and every sub helps a lot.

[@MondayKomolafe-zm7kt]

It's provides cooling air postering indoors and outdoors, definitely great assembly well done expert american.

[@NINEPOINTFIVEPROJECTS]

Hi and thanks for the comments. If you haven’t done so already please consider subscribing. I would really appreciate it.!

[@robertnasser9937]

Looks nice I am planning to do my 2021 the same way, because

[@NINEPOINTFIVEPROJECTS]

Hi, thanks for watching and commenting. I think it does a great job sealing potential leak areas for sure. Very sticking stuff! I think you may have already but if not please consider subscribing and hitting the like button. Let me know how the Eternabond works out for you.

[@jasonwyatt823]

❤your welcome

[@NINEPOINTFIVEPROJECTS]

👍

[@hpxmav4028]

I just subscribed great video! You ever think of putting some type of rv armor or flex seal on top of the whole roof? I’ve heard rv armor does not stick to the eternabond tape tho but maybe the white flex seal does

[@NINEPOINTFIVEPROJECTS]

Hi, thanks for watching, commenting and subscribing for sure!. Yeah I’ve looked into some of the roof coatings and will try to do that later this year. Thanks again.

[@warrenmullett]

I found a super legit channel called RV Roof install… when and if the time comes for a new roof this guy knows his stuff..

[@NINEPOINTFIVEPROJECTS]

Thanks Warren for the comments!

[@marks146]

Eternabond is a great product. I've been using this stuff for quite some time. Once it's stuck it's stuck.

[@NINEPOINTFIVEPROJECTS]

Hi Chipper, thanks for the comments and watching. I really appreciate it.. this is my first experience with it but I'm impressed already... you're right, once it's stuck it's definitely stuck!

[@3Timothy_4-7]

How has the tape held up after rain has run through the gutters a few times? Are you losing adhesion anywhere?

[@NINEPOINTFIVEPROJECTS]

I think it is still stuck pretty well. I'll get some pix the first chance I get.

[@RC-hm9vg]

Great job! Should have stayed with the white ac covers! The heat load from the sun hurts the ac on hot days by increasing the surface temp!

[@NINEPOINTFIVEPROJECTS]

Hi and thanks for watching and the comments! That’s good advice that I didn’t consider. If you haven’t done so already please consider subscribing. If you already have, I really appreciate it.

[@NINEPOINTFIVEPROJECTS]

Hi and thanks for watching and the comments! That’s good advice that I didn’t consider. If you haven’t done so already please consider subscribing. If you already have, I really appreciate it.

[@joestone2068]

Did you do the slide outs with the Eturnabond

[@NINEPOINTFIVEPROJECTS]

Hi and thanks for watching and the comments. No I didn't do the slide outs, at least not yet but I probably will at some point. I think you may have already but if not please consider subscribing and hitting the like button. Thanks again.

[@tommccoythomasm2505]

removing that calking where the roof meats the side wall would better be done with a plastic scraper

[@NINEPOINTFIVEPROJECTS]

Hi, thanks for watching and the comments. I really appreciate it. Yes you are correct. That would have been a safer approach for sure. Luckily I never went too deep with the blade. I think you may have already but if not please consider subscribing and hitting the like button. Thanks!

[@AiBilly]

Is it ok to stand on the Slide-Out like you did ?

[@NINEPOINTFIVEPROJECTS]

Thanks for watching and the comments. It was ok on mine but not sure if you could do it on all rv''s. Either way I think you may have already but if not please consider Subscribing and hitting the like button. I would really appreciate it!

[@thumperpaul]

Looks good, but I have heard horror stories about the tape shrinking and letting water in past the tape. It’s an absolute nightmare to remove and repair the damage.

[@NINEPOINTFIVEPROJECTS]

Hi, thanks for the watching and the comments. I have noticed some wrinkling begining to show, but am thinking it is temperature related. I don't see it turning loose anywhere as that is some of the stickest stuff I have ever seen. I can see why it would be a pain to remove. If it does become a problem, I might as well pull the entire roof off because I won't be able to just remove the tape. I'm going to keep an eye on it and do another video if I have problems with it. Either way, if you haven't done so already, please consider Subscribing and tap the bell icon. I would really appreciate you doing that if you would please. Thanks again.

[@stockrock796]

Where can I buy that tape? How many inches wide is it?

[@NINEPOINTFIVEPROJECTS]

Hi thanks for watching and the comments. I think I got it on Amazon. It's called Eternabond and comes in 4 and 6 inch widths. I think you may have already but if not please consider Subscribing and hitting the like button. I would really appreciate it! Thanks

[@steelpix]

On the side, did you remove you gutter trim and put the eternabond in instead of? How’s it holding up?

[@NINEPOINTFIVEPROJECTS]

Hi and thanks for watching and the comments. I cleaned everything real good including the gutters. I then rolled the tape down into the gutter the best i could. It does cut down the capacity of the gutters a bit, but doesn't appear to be a problem. The reason I went into the gutter is the way mine is built, the screws holding the gutter go through the gutter, through the sealing putty, through the roofing material and into the wall. That is a huge leak potential right there! They seal the top of the gutter metal to the roofing material with a tiny bead of caulk. I show that in my video. The caulk dries out and can let water down behind the gutter and into the wall. The tape is holding up very well and staying adhered nicely. The think I have noticed however is that it expands and contracts a good bit. Some days it appears wrinkled and some days it's laying nice and flat. Look for my 1 year review video and you can see what I'm talking about. Either way, if you haven't done so already, Please consider Subscribing and hit the like botton. I really appreciate each and every subscriber as I strive to grow my channel. I would REALLY appreciate it. Thanks again.

[@shannafinch6470]

Close one eye and squint with the other 🤣

[@NINEPOINTFIVEPROJECTS]

That's usually the way I look at most things! Thanks for the comment and for watching! I really appreciate it.

[@olgacosme7657]

Why not paint with silicone while you were up there

[@NINEPOINTFIVEPROJECTS]

Hi thanks for watching and the comments. My plan was to come back and do that. I wound up selling the RV though. Either way I think you may have already but if not please consider Subscribing and hitting the like button. I would really appreciate it!

[@jasonwyatt823]

Hey

[@NINEPOINTFIVEPROJECTS]

🙂

[@DanielJohnson-ec8rk]

I would not have painted black it holds heat

[@NINEPOINTFIVEPROJECTS]

Hi, thanks for watching and the comments. Yeah I probably should have just painted both of the white. I think you may have already but if not please consider Subscribing and hitting the like button. I would really appreciate that.

[@JBM101]

Instead of removing the cauking why dont you just tape over it with eternabond??? save you tons of time and work

[@NINEPOINTFIVEPROJECTS]

Hi and thanks for watching and the comments. I probably could have just gone over it, but it was really pretty loose and no trouble to remove. If it had still been adhered well, I would have gone over it. Either way, thanks again! I think you may have already but if not please consider Subscribing. I REALLY appreciate each and every sub.