Clearing a communication trouble on a full English keypad

[@beverlyfreeman4237]

6 year old video... this still works!!!!!! Thank you!!!!

[@erikd4031]

Even though your video is 5 years old but its the only thing i could find within seconds what got rid of my yellow triangle. Thank you!!!!!!

[@stillmebri]

Thank you that worked! Now I can cancel this $25 service call from ADT!

[@KiraOniiChan]

Wow, even in 2021, this helped me when I got this in the morning and had no idea what to do. Thank you very much!

[@VanIsleHam]

Me too - couldn't find it in the manual. Thank you very much indeed!

[@brucery]

Super clear, solved my problem. Thanks!

[@stevenmyers8680]

Thank you so much! Works great! Finally can sleep uninterrupted!

[@lasabrosita8101]

Today, 8/3/2020 i had an issue with my system... i followed the instructions and Bum... (clear all errors). thanks.

[@alfernandez4881]

Thanks for your help I turn off the peachy noice is gone thanks again you are a genius

[@johnseabrook6701]

Great job you fixed my problem good job!

[@tylergarcia3697]

I did this, but my orange triangle is still there. It still says there is a communications problem though. The last thing we did was change the battery which stopped the constant beeping.

[@menmolin]

Hi, thank you for the video. Would you mind telling me how can we do the same thing on Paradox 1689? The keypad has no screen display.

[@_life_of_jodie_]

I followed these steps but still have an orange triangle and it says trouble communication? Not sure what to do.

[@jrocc_kmh]

Mine too

[@Handyman1970]

​@@jrocc_kmh me too

[@cirocalves]

Just an update! For newer systems, seems you need to use "04" intead of only"4" ;)

[@pookiewood]

Hi, have you ever seen the keypad flash FF? We had a power outage due to a storm and it came back up with flashing FF. I can't find anything online about it.

[@kenobeer7105]

hello, and thank you for your tutorials. I again have a fault 1-3 "general system fault" yet the alarm works correctly, commissioning, shutdown, ... sending to home automation on my app ... it's happened 2 times already and I called an alarm company each time who disconnected the 2 x batteries and cut the main power supply and restarted the DSC, then the fault disappeared. The batteries are less than 1 year old and work very well But apparently during a micro power cut?, the Orange default comes back do you have any idea how to fix this error? thank you

[@TheSpiljar]

I have trouble with DSC WT5500-433EU system. On my keypad appears message "Panel Response Not Received". Can you help me to solve this. Thank you

[@Chuckles9191991]

Thx.

[@MichaelBachand-c5u]

When entering "4", it didn't trigger the alarm and the issue wasn't cleared.

[@vijithalingaratnam8226]

Thank you :)

[@redyeti7371]

This worked, thank you!

[@gloriat7757]

THANK YOU!

[@AdisenBarr-e4u]

You should have said clearing a communication trouble on a DSC keypad. It’s confusing people coming over to damn ADT keypad trying to put a DSC code setting off alarm

[@lelandclayton5462]

didn't work on my PC1616 Panel.

[@sawoodworker464]

Only works if you have an active phone line

[@Handyman1970]

That is my problem. I don't have an active phone line. So what next step?

[@sawoodworker464]

The trouble will clear when the panel is able to communicate with the monitoring station receiver over an active phone line. Only other thing I can suggest is to call DSC and see if there is a work around to clear the trouble without a phone line.

[@sunkenship10210]

Is it possible to do this without setting off the alarm?

[@reneroman1421]

"Hi ...Nice video.... I have a DSC system Alexor PC9155with a WT5500 keyboard. I'm having problems with the WT5500 keyboard and Iwant to replace it with a new one. I would like you to help me erase the bad keyboard from the program and enroll the new one so that everything remains the same as before. How could you help with my problem ..... Thanks"

[@desminefrancis7375]

Thank a mil

[@alanfisk9166]

Ty so much

[@dudleyvanwyk168]

if number is 1 what to do

[@istvankovacs2759]

0:53

[@wernergermishuys2065]

Hmmm this doesn't always work

[@jrocc_kmh]

It didn't clear mine

[@Bendew]

Did not work