Cleereman Lumber Pro 1 year after install

Cleereman Lumber Pro after a year of running - Post Hardwoods in Michigan.

[@jamessimmons8158]

Very efficient sawmill, cuts both directions saving time and wasted energy in moving the saw head back and forth without cutting on the return. Also thin kerf so you can recover more wood and less wasted to sawdust.

[@grazynazambeanie5963]

Now this makes sense , none of that banging and thumping gets transferred to the V rail

[@JohnNaturkach]

There has to be a lot of stress on the head saw components moving all the time. Wouldn’t want to have the millwrights job in that mill.

[@ammagato]

Razionalizzazione, niente sprechi e tempi morti, questa è una macchina eccellente!

[@tinahaynes696]

makes single edge machines look like old fashioned steam saw mills.

[@knezowsky]

Hello, how much is this machine?

[@jamesbartles9203]

How often do they have to change or sharpen the blade?

[@CleeremanIndustries]

The saw change interval depends on the quality of log that you are sawing. Most mills run theses saws about 4-5 hours before they change them and some will run for an entire 8 hour shift before changing the saw.

[@phillipmaxfield7516]

The changing also depends on if the wood is frozen where it will pull a little and pull tension out of the saw we sharpen our saws differently for frozen logs

[@markschrock1600]

Is that a model 38 carriage

[@garylarson6386]

very fast, great investment

[@mattcoblentz74]

Why in the world don't you turn the log more? Never saw anyone saw all the way to the heart before turning the log.

[@jeffcampbell6314]

They are sawing on taper for grade lumber.

[@mattcoblentz74]

I was a grade sawyer for years and its been my understanding that sawing in the fashion we see here causes way to much stress on the lumber and also you loose to much value on the rest of your log.

[@greghyman3708]

+Matt Coblentz yeah he is offsetting the grain way to much. after drying much of that lumber will have sidebend

[@mtl-ss1538]

@@mattcoblentz74 New Zealand has big logging trucks. Gross Combination Masses of around 150-tonne. kzbin.info/www/bejne/j3q7oI2wm6d9gZI,kzbin.info/www/bejne/jKOoaWptitljpKs&ab_channel=WillBishopTrucksNewZealand kzbin.info/www/bejne/inq8dYmahJWnebM -kzbin.info/www/bejne/oKa4k5Kvorxmhrc&ab_channel=WoodleysNZ kzbin.info/www/bejne/rJ25pIqhatWEZs0 New Zealand- Classic Chip Trucking with 8V92TA-13sp.@ 40t kzbin.info/www/bejne/nV6ln6qvd7Bofs0 NZ farmers block been logged,@57ton gross. kzbin.info/www/bejne/oJLOaKOOa9Z2n7c

[@bienvenidoseas]

hola soy de Durango México, este aserradero es una maravilla ¿me pueden cotizar uno?. saludos.

[@encarnaciondiaz7181]

Karen A. Rodriguez , Yo también quiero uno, soy de Guadalajara, JAL. Me dedico a la extracción de madera.

[@BakoelGendoel]

very fast..very effective

[@pedroflores97]

Cuanto sale un aserraderos de esos puesto en chile

[@lammewching4009]

how much to set up?

[@YanxRawk]

I think it depends on the application and what you're planning on producing. We're just getting ready for an install into an already established circle mill. With all the support equipment and construction its looking to be quite the expenditure.

[@ellismarch2713]

Why turn log while you are still getting fas

[@encarnaciondiaz7181]

Quiero uno, cuanto cuesta instalado

[@buildmor]

Zing zing zing, done. ⏱NEXT?!?! 😲😄

[@tryduck6993]

How is he cutting even when the log keeps jumping up and down as he cuts it? did he just forget to clamp log on a few or doesn't it have a way to grab log and hold steady?? like at 12.55...log keeps jumping up and down as its being cut....

[@sgtblt0506]

The log at 12:55 moving around is doing so because of stresses in the wood being released as the outer growth rings are cut away. Basically the ends of the cant bow up like a rocking chair rocker and don't sit flush on the bed, and as the band starts the cut the downward force rocks the end up even though the cant is clamped in the middle. The cut should remain even as long as the cant doesn't move forward or back relative to the plain of the blade.

[@Krishnamurthy-fx4qy]

That Saw Mill Awesome. I am Not Seen This Saw Mill Never Before. How Much Cost Of This Sa Mill. I am From India (Andhra Pradesh State). Please Send Me Full Details Of This Saw Mill, Photos, Brochor and Total Cost Of This Saw Mill With Catalogue.

[@fra631zxcvbnNK]

super maszyna dwustronna

[@Chalera4x4]

Demonhera do caralho 👏 parabéns

[@tomjohnnyernstsen1657]

.u

[@patrickdean4853]

Seems slow