Clicker Keypad ProgramTo Smart/ learn Button-Type4

[@jakemalish895]

I watched 5 videos. This was the only one that showed the correct sequence to push in order to successfully program my opener. Thank you.

[@ganbare6]

Just moved into a new home and used this video to reset the keypad code. These instructions were difficult to come by. This video had all the information I need down to the opener ID which I can clearly see options 1-9 by pausing the video. Thank you so much!

[@ThatBoyGhost82]

I know I'm years late but thank you brother I have an over head door opener and I've been trying for over a week with no luck. My instructions didn't say anything about holding *# at the same time. It worked perfectly after this video

[@willhaskett]

First time ever commenting on a KZbin video... But this was exactly what I was looking for. Inherited a house with this keypad (no Enter button) and this was the only video I could find that gave me ALL of the steps. Finding the Opener ID was critical. THANK YOU!

[@dorisbrown9357]

Thanks to this video, I didnt have to go buy another keypad opener...instructions were spot on...thank you for also showing the opener code page.

[@Miya-jp5ko]

Thank you so much!!! I watched countless videos in attempt to reset my garage code. No luck until I came across this video. I’m so grateful for your video. Huge help and you made the directions very easy to understand and follow. You are amazing!!!

[@lbsrfr999]

After trying a dozen times to program this keypad, I figured it was broke and should return. But before I did I decided to remove the battery for a few seconds, replace it and try programming it again. It worked that time.

[@ForbiddenDuke]

This!!! Me too

[@gregcampbell465]

This was by far the most straightforward set of instructions I have ever followed! Thanks, reprogrammed on the 1st try.

[@peterodaro8777]

Thank you so much. Your video solved my problem. Direct to the point. Great. 1. Hold #* together until light stops blinking. 2. Enter four digit code of your own creation for example 1234. 3. Then enter garage machine code (year manufactured dependent) for example 3 follow by #. 4. Next climb ladder and press learn button once and light comes on. 5. Then enter your self created four digit 1234 plus 0 and light blinks or you hear two clicks indication of acceptance of your self created code. Henceforth, press 0 to control movement up and down. All said and done, in future when you come home, just type on your keypad 1234 and 0, bingo, it opens and when existing home through the garage input 1234 and 0 to say bye bye home.

[@litoloco4fish]

Thank you brother..my mother lost her booklet and I didn't have the code. You showed the codes and I was able to pause it and reprogram her pad...many blessings brother thanks again

[@RayshellChill]

Your video was the only one who mentioned having to possibly hit the zero two times. So that was a total of three with the zero at end. Then two more. And finally it worked. Omg I’ve been at this for over a hour. And I had to re program my car hand helds’ cuz other videos messed up the garage opener it’s self LOL.

[@brandiewilliams8707]

Thank you once I removed the keypad to confirm the model number and searched the internet for the correct manual for the ID# this was a breeze 👌🏽 👌🏽

[@99Mamacita]

After viewing many other videos , trying those others out with no success - this was the only video that worked within one minute!! Thank you so much! You explained it very clearly

[@CGSurge]

I come back to this video every time my remote loses signal. thanks so much for taking the time to make this video!

[@3tylersmith]

This video probably save me four hours of my life

[@GetRevitalizedMedSpa]

THe only video that helped me among the 5 I have viewed. Thanks for the clear instructions.

[@navin01985]

Same here

[@tylerr2814]

Out of 20 videos this guy was the best one and it actually worked for me

[@crystalramsey5919]

Your video was very clear and helpful! After watching this, my husband and I looked at each other like, DUH! Thank you so much for your help!

[@dorreenclements8774]

Very helpful. I was inputting the code# and then waiting for the light to go out. Then inputting the garage opener code#. Once I watched this I realized I needed to enter the passcode#garage door code# all at once. Thanks so much.

[@philcamacho127]

Thank you! I've looked at other vids, and none gave me the correct steps except yours!! 😊

[@MrRazor99]

Thank you so much for this video! Especially showing the owners manual with the different numbers for garage door openers.

[@paulnewman5667]

Thank you Sir!!! This was fantastic to actually see it with you presenting the programming. I’m sure many people may think it’s very easy, but I did this four times without any luck. I’ve done others before many years ago. However, watching you do it made my night not so long.... Thank you!!!!

[@benjamintaylor7487]

It's been said many times already, but THANK YOU for making this video!! I watched SO many other tutorials that just didn't work, and your video worked like a charm. Yours was short, cogent, and hey, it actually worked. Thanks again!!

[@philmason2297]

Tried a dozen times to get this thing programmed. Finally looked for a KZbin and had it done in five minutes. THANKS FOR THE GREAT SIMPLE INSTRUCTS!

[@itswhitt3145]

Worked so easily! Even got lucky enough to have my opener on your instruction sheet. Great video. Thank you

[@drewpowers6038]

Best garage programming video I have ever found!!!

[@jessicafidalgo2980]

THANK YOU!!!!! My son messed up our code and i could NOT figured out how to fix it. This worked great!

[@duckiehawk]

I appreciate you guys making this video. Helped me get my keypad programmed again after I accidentally changed the PIN a week ago. This saved me alot of future frustration. Keep up the good work!

[@47redragon]

Thank you! This video made the reprogramming easy and I had the keypad working in less than 30 seconds

[@alexandrwilliams8712]

Thank you man! Watched a few videos and only yours worked for me from the first go round!

[@tenthdimension9836]

This is an absolutely perfect video on how to perform this procedure.

[@RG-gd5tc]

This video has helped me several times over the years! Thank you!!

[@BeemerMac3]

You are awesome!! Really appreciate it. Bought a new house and followed your steps. Best how to video ever :)

[@A.C31]

Man, the 24 people who gave this video a thumbs down must not be too bright. This is a very good video.

[@Jasonf1399_]

U wot m8

[@MsEmma3662]

Jeff Brown very good the only problem for me was the mounting I put it in upside down and the pad didn't work so now I ave to rekey it

[@swainscheps]

The instructions I downloaded said that Sears Craftsman with a red/orange button was a type 4. Glad I watched your video and saw it was actually type 2… Also no mention in my instructions of hitting the last button twice during the test…🙄

[@matthewmolina9485]

Thank you 👏🏽 others did not mention pushing "0" button "twice"!

[@darrylkallen]

I was freaked out at first that any key was opening and closing the door, and then I realized you have to wait 15 minutes for that functionality to stop. Thank you for the video.

[@dancindavey1515]

Darryl Allen Thanks for that info. He didn’t mention that. Was wondering the same thing.

[@lurnfitness572]

Great video! Saved us a replacement trip to the hardware store. Good call holding the company codes up to the camera as well!

[@jackyshaw5761]

I've watched multiple videos and this one helped me with my solution. Thank you for providing all the extra information you are the man!!!

[@jamesmedeiros8160]

Accurate information, audible sound, and the instructions worked for the green button Sears Craftsman also.

[@Bigjilm1]

Thanks works perfectly. The 120+ thumbs downs must not know how to follow directions.

[@user-os4od9np5r]

I follow the instructions And I just don’t understand why it won’t work and try four times and I told myself I give up ,so told myself let me check you tube and I found you ,Thank you so much for your simple video and my problem is solve it only take me five minutes I see what I am doing wrong . Thank you again

[@sue2480]

This worked perfectly for me. Best instructions out there. THANK YOU!

[@MrDakota352]

Omg thank you so much !! I was going crazy because I don’t have enter button on my keypad . All good now yay !!

[@jordanB472]

Excellent level of detail but short and sweet. Thanks!

[@jwhillyer]

This video helped me reprogram my wireless keypad that needed to be reformatted. Thank you so much!

[@BennyBlaze23]

Finally! Someone that knows what they're doing! Thank you!

[@jimearl1847]

thank you - second time I had to borrow your wisdom. All the best!

[@bigmig5150]

Thank you so much for adding the link to the remote finally reprogrammed my garage opener

[@markthill1]

Thank You! Very Helpful. I was also able to read your Sheet to find my opener code. Good stuff

[@markphilippsjr]

Extremely helpful, you did the pin and ID sequentially which made the difference the instructions are terrible. Thank you

[@adamjoumad4375]

thank you very much . this video should be posted on the company's official website .

[@lorenzodevivo102]

Great video! Helped my mom and I out so fast

[@DanTheManNetwork]

The best video man on how to program key pad.

[@A.C31]

I love YT how to videos, like this one. I can't remember the last time I read the directions to do anything. It's all on You Tube! :)

[@DjRoach313]

My favorite video of all time! Every time my battery dies I have to watch this to reprogram it🤣🤣🤣👊🏽🤟🏽

[@danjohnson3860]

Worked perfect. Even obtained my opener ID from sheet shown in demo. Thanks!

[@navin01985]

Thanks GS overhead...perfect video and can even find door opener type in their website

[@kengy1991]

I have the new LiftMaster (2011-present) and this was just what I needed. Awesome video!

[@hotmeds]

Thanks a ton I programmed it while your video was running👍🏼

[@discgolfinfo]

WOrked perfect, thanks!!!! been tring for months with other videos.

[@nancyhanley6721]

Thank you thank you thank you. This was great! I was able to reprogram my Clicker keypad using your very clear instructions here. Thanks again.

[@gaylonpowell4453]

Great assistance, did have to find my Linear code (1) on you website after that all programming was as instructed!

[@stevebyrne6606]

Excellent demo and it worked straight away. Thank you.

[@tooold8318]

Thanks for your help today Did not understand that you program the remote first 2nd the garage motto Very well done for this old guy Saved me a divorce 😍

[@scrawls1627]

Thank you for the video. I followed it to reset my keypad and it was "spot-on"!

[@garyg8040]

This is the third time listening to this ,,my father always messes the code up and I have to fix it ,,,strait forward instructions, works 1st time every time

[@djuban1]

This video helped me out big time tonight. Thank you so much!

[@williemoore5145]

Worked as advertised thank you so very much for posting.

[@putty059]

Your instructions are right on point, Great video!

[@MrPuneetAgrawal]

Helpful Video! Very Important to know - It has a feature that would let me press any key to open it again for about 30 seconds after closing. I suppose it's meant for those times that you remember you forgot something, just as the door closes. But if yours opens the door after the keypad hasn't been touched in a long time, then it is broken. Doing a hard reset might fix it, but I'd be surprised if it does.

[@garyg8040]

Great video, 5 minutes and it was done ..just do one code at a time until it works ..my number was 4

[@loosenut1969]

Thank you I have use this numerous times I’ve never commented and what I do is Win you show the cheat sheet with all the codes I just take a screenshot and then I can zoom in and see how that way you don’t even have to go to the website thank you

[@BlakeWarrington]

Thank you very much for this. Worked perfect on my Liftmaster.

[@paulkempin9320]

Thanks, now we'll finally use this thing that we bought about 1/2 dozen years ago. The mystery is solved, thanks you Columbo… :-)

[@LeadTherapy71]

Thank you, the sheet I have didn't mention pressing the # key after the code and ID number and I couldn't get it working, will try this tonight - much appreciated.

[@alaindelonjpa]

Best video, about objective and it helped me a lot. Thanks.

[@IAIS96]

that really help man i got lock out of my house somewhat i have to reprogram my key pad it would not open the door it was program but I just had to do all over again thank you man my keypad is working again

[@GSOverheadSystemsNovato]

IAIS96 Great, glad the video was helpful.

[@andersonmenjivar6956]

Thanks man! Helped alot the reset our code

[@Poodlefang89]

Thank you so much! Saved me so much time!

[@OrionMagus]

The code on the instructions was wrong for my type of garage opener. I just tried them all until I found one that worked. Thanks for the video.

[@jefftrudell1563]

Worked like a charm…thanks!!

[@DavidRiosTV]

great video tutorial. your website was very helpful to find the manuals.

[@benjaminbernsteinpodcasts]

This procedure worked perfectly. Thank you!

[@rollie2531yt]

Thank you for making this video very easy to understand I was able to reprogram my key pad in less then one minute. Awesome job!

[@zacharysizemore2428]

Worked exactly as you showed! Thank you sir!

[@travisellis984]

Thanks for the awesome video. Very easy to do with your instructions.

[@fanmanandrew1586]

Oh my gosh, Thank you so much for making this video! I have been trying to get my sister's keypad (that is the exact same as the one in the video) to work again on her garage door opener, which is a Chamberlain Whisper drive with a belt. I finally found out what I was doing wrong.

[@xanderer5801]

thanks much for your time to help, i watched 10 videos not help at at but you are great 👍

[@michaelapple3048]

Thanks for sharing this video. Worked like a charm.

[@danielgoss5162]

Great and very handy video. Thank you! I've used this several times. Super helpful!!

[@yankeehank1897]

Thanks for the video! Just passing this along in case anyone else runs into this, but you cannot select a 4-digit pin that begins with "0". The instructions that came with the keypad did not mention this restriction.

[@msroyal1313]

This demonstration helped me tremendously, and it saved me a lot of money. SOOOO simple. Thank you very much!!! : )

[@michaelkeith6298]

This video saved my life lol thank you

[@rex0370]

Thank you - this was VERY helpful to me today.

[@redmapleleaf4617]

Perfect! Thanks a million! Worked EXACTLY as you described!

[@trinitysolo]

Thank you!!!! I lost my instructions, you rock

[@chrisbova8944]

Perfect I have a LiftMaster and that was super simple thank you for your video

[@Tyreelaserweld]

You are the greatest!!!!! Many Thanks!!!!!

[@opaledwards522]

Thanks, you made it so easy for me to do. 🙏🏽