BEST WAY to CUT WOOD down the GRAIN with a CHAINSAW stops the chain going blunt

[@PKDoesStuff]

Been hand tool woodworking for years, and very familiar with paying attention to grain direction. I still never made the connection to chainsaw use until this video - makes a ton of sense. Thanks for sharing!

[@ClimbingArborist]

Glad it was a useful bit of information 😃

[@RickYoung-e2d]

I've cutting firewood for 8 years enough to heat my home, thanks for sharing that ,cheers

[@garryedwards8451]

Be doing tree work for year's, just didn't realise this. Every day is a school day. Thanks

[@ClimbingArborist]

You’re welcome buddy 😀 glad it will help in the future

[@joshjohnson3378]

Thanks for more relevant and informative content Dan. I especially appreciate that even in the rain and ick that you still take time to shoot video.

[@ClimbingArborist]

It was a little damp 😂 but a little water won’t scupper my plans

[@mburke1211]

This is a great tip for woodworkers who mill logs on the bandsaw.

[@ClimbingArborist]

😃

[@AllanWright-d9r]

The long rippings are brilliant for starting your fire when dry.

[@billytheman]

Good for mulching too.

[@MrJackwork]

...and chicken nesting boxes.

[@craighellberg4366]

Our local utility cut down a large oak tree because it was a danger to the powerline. But they left huge rounds. I bought a ripping chain to cut them in half, and all I did was burn my saw on just one of the rounds. Now I know how to get the job done right. Thank you so much.

[@ClimbingArborist]

Yeah, it will do that to your saw cutting from the flat side. Good luck with sharpening the chain and with round 2 or ripping the wood

[@claudegosselin2449]

His boots don’t saw safety rated.

[@MrGorehound]

@@claudegosselin2449 They look like either Pfanner Tyrol or Arbortec Scafell chainsaw boots to me.

[@daniel_913]

@@MrGorehound Wrong. They are Meindl Airstream

[@MrGorehound]

@@daniel_913 didn't think about them. ;-)

[@willdales1460]

Thanks Dan, this was really helpful! As a DIYer who has inherited a small orchard, but never been taught how to use a chainsaw, I would never have learned this any other way.

[@ClimbingArborist]

Awesome! Glad it was helpful!

[@slvalleyboy]

Never too old to learn. I'm an 81 y/o occasional chain saw user and didn't know this.

[@teamja1088]

This is awesome that you posted this as I had to cut a round in half this past weekend to move it and I noticed that instead of chips being produced I was seeing sawdust and my chain quickly dulled. Thank you for posting this video!

[@ClimbingArborist]

Glad it helped! 😃😃

[@Bythirteen]

It makes so much sense, and I literally experienced that situation firsthand just a month or two ago and didn't realize what was going on... even noticed the long squiggles vs the fine sawdust as I switched my cutting approach.... yet I didn't connect the dots! Thank you!

[@ClimbingArborist]

Glad this video connected the dots. Having done this for so long, sometimes we forgot to explain the basic things that many people aren’t aware of, but thought of this the other day as we were chatting about it at work.

[@Bythirteen]

@@ClimbingArborist it also explains why chainsaw milling slabs out of logs is such a slow arduous process with such fine dust! aaaaand kills chains. Appreciate the video bro!

[@ClimbingArborist]

Totally, milling takes forever, but also it leaves a somewhat smooth finish because it’s hardly taking off any material each pass of the tooth

[@devonahawkins5021]

Thank you for your commitment to educating us, even at the risk of dulling your chain!

[@andrewbevan3933]

Thank you for this video. I tested it this morning and can attest that this method absolutely works. I cut a locust a few years ago that had horribly interlaced grains and was virtually unsplittable. I could spend 20 minutes wearing myself out with maul and wedges splitting a single 15 inch round. I was down to a dozen of the largest rounds and was prepared to haul them to the woods and dump them. I had already tried splitting them from the top and it just roacked my chain in no time. But I saw this video last week and gave it a try. In an hour I had them all sectioned about 3/4 way through into burnable pieces. I can now split them the rest of the way with a wedge.

[@ClimbingArborist]

We absolutely love this comment. What better way than to draw upon bad previous experiences, and then test out a slightly different technique with great success. Thanks so much again for your comment. We will share this with many of our audience 😃

[@EMOSChannel]

Thanks a lot. Though I'm not a novice in cutting firewood, I didn't know that trick.

[@ClimbingArborist]

👌

[@slkwonk]

I’m actually doing this with big red oak right now. Only twenty five feet to go, sixteen inches at a time. 😂 Your tip is spot on. Thinking your way through the process sure pays off. Be safe and mind the back! You only have the one.

[@ClimbingArborist]

Good stuff! Have fun 👍

[@jingshelpmaboab]

Exactly what I was looking for!

[@Bristoll170]

That's a FANTASTIC bit of info' for us home owners. Many thanks for sharing your experience 👍

[@ClimbingArborist]

Glad it was helpful! 😁

[@thomasolsheski4857]

Well done as usual Dan. I also liked how you wiped away the dirt after flipping the round. A lot of people don’t seem to realize that is a chain killer as well.

[@ClimbingArborist]

Just a subconscious thing for most of us experienced chainsaw users I think. I’m sure you are the same

[@gunterbecker8528]

❤one excellent point my friend!

[@ClimbingArborist]

👌

[@williamsolomon1307]

Wow. I never knew the difference! This will save me time when processing wood on the job site. And less sharpening is a time saver as well. Dan, thanks! That is absolutely useful and much appreciated.

[@ClimbingArborist]

👌 awesome buddy

[@havespurswillclimb]

Enjoyed the video. Nice demonstration, Dan.

[@ClimbingArborist]

Cheers, glad it helped 🤙

[@Joe-lb6vy]

That was a great lesson. I've got big rounds & was trying to cut from the top of the original cut & only dulled my chain & made me very frustrated. Tried your recommended method & what a difference! Thank you SO MUCH for this video. Stay safe...

[@eliotspencer9212]

Thanks for reducing the sound of the chainsaw.

[@ClimbingArborist]

No one needs all that noise on a video

[@billmcparland4462]

Big saw and the method you show. We resaw lumber as well so we use a ripping chain which also seems to help. Good info

[@ClimbingArborist]

Awesome 🤙

[@kazparzyxzpenualt8111]

I guess I have heard of a ripping saw blade like some kind of myth. I have never seen one. It sounds logical enough. Such a specific type has never jumped off the shelf at me. What are the main differences in the two designs? Do ripping chain blades have more ,or fewer teeth? Is the filed angle of the cutting blade different too? The game changer in this video is the direction of attack. I've seen the long excelsior like ejection materials when going at a log section that way. In fact that stuff can really bind up the insides quickly if using the bottom of the bar to do this. At least in my experience. That is one reason I stayed away from doing it. But I did always realized how much the grain affected cutting against it end to end. Killer friction and heat that way for sure. But those long materials ... Just like small twigs and brush shred if you try to use a chainsaw to do that kind of cutting (not recommended) Top of the bar cutting shoots material away from the tool.

[@emogowl]

Brilliant! Probably old info to the experts out there but I've only been using a chainsaw fairly regularly for about eighteen months and this is new and valuable. I still have some rounds I can barely lift that have been in the shed for a year or more, thanks to you I now have a solution, and a neat way of lighting my log burner with those shavings too, thanks!

[@ClimbingArborist]

Awesome, have fun out there ripping it up 😁

[@michaelkearney5562]

Very informative and I learned something that I did not know. By the way at 7:55 and 11.30, it's easier to finish off the cuts by putting the bar into the cut and coming up using the pushing chain. You would rarely come across a holly trunk as thick as what you have there. Big thumbs up.

[@jodyhodge2129]

Never thought of that. I always thought you needed a rip chain when you did not cut cross grain Thank you..

[@ClimbingArborist]

Many people think that. Ripping chains are designed to make a smooth cut so that when you slab up a trunk you get a much smoother finish. The cross cut chain leaves a much rougher finish an makes a lot more work to plane down the surface.

[@TheLkoler]

What a great demonstration! Thanks very much for the education.

[@ClimbingArborist]

🙏

[@louadams4394]

Thank you - great explanation and demo, don't often cut this way but now I know a better way.

[@ClimbingArborist]

Glad it helped 👍

[@t.p.2305]

That video came just right in time!

[@ClimbingArborist]

👌

[@anthonymoravec3599]

Little details count! Thanks for educating. Sharing data and being a professional.

[@ClimbingArborist]

thank you, We appreciate that 😃

[@MarkSmith-nw4os]

To learn something new every day. Thank you sir.

[@ClimbingArborist]

Very welcome 😁

[@garychiuminatto917]

Thanks for the info. I’ve got some rounds from a tree that fell and I’m a little too old to split them. I’ll try cutting them the way you instructed. Great video, keep them coming.

[@ClimbingArborist]

Fantastic, glad you came a across this video, good luck 👍

[@npast1]

Great video. This is how I am splitting my firewood lately. As a regular homeowner with a fireplace, most of my firewood is from the craigslist ads 'free firewood', all of it is freshly-cut green wood trees that people want to get rid of, and using a wedge and sledgehammer is becoming too much work to split those logs. So, I am simply cutting it along the grain with my battery-powered EGO 18-inch electric chainsaw now. Works like magic. A bit slow, but nearly effortless, and I don't even care if the piece is all knotty (used to scare me when I was doing it the conventional way). I was using the chainsaw exactly the way you recommend, but only because I found it to be more stable, as the log won't tumble when it is lying on its long edge. I didn't even realize that it is also the more efficient way to cut it (still have questions to be honest), but live and learn!

[@ClimbingArborist]

👌

[@arboristBlairGlenn]

The long strips or shavings are great for animal bedding. I use it for nesting with our chickens.

[@ClimbingArborist]

Definitely looks like a hamster’s paradise 😄

[@simonsmith8610]

Well done, very useful information,Thanks

[@ClimbingArborist]

Glad it was helpful! 😃

[@Jeff-rk8hq]

Dude killer video, believe it or not imo this is one of the best pieces of information I’ve gotten regarding chainsaw use as I actually made this mistake once I was using a smaller saw and man was my chain dull like I’ve never seen, im not a professional arborist tho, rather just a homeowner that had a crab apple tree fall in my yard and needed to cut it up but I learned a lesson on that one bit until now I really hadn’t connected the dots, thanks

[@rc6865]

I did not escape ads as an appreciation of this video

[@neilrose477]

Awesome video Dan , very useful, that’s another thing I’ve learned from ya 😀cheers bud 👊🏻👊🏻

[@ClimbingArborist]

So glad to hear you’ve picked up some useful stuff from us, that’s pretty cool 👍

[@andrewpearse53]

Really helpful. If never thought I'd that. Didn't look like nice weather for the filming!

[@ClimbingArborist]

Glad it helped! Was pretty crappy weather for filming 😃

[@utube343434]

Great information in this video. I need to do this exact thing with some quite large rounds. Thanks!!

[@douglasbarrows8110]

Thank you, extremely useful info.

[@ClimbingArborist]

Awesome, glad it helped 👍

[@johndarcey]

Thanks legend. Very handy. Always learning!

[@ClimbingArborist]

Awesome 🤙 thanks for the comment

[@rc6865]

Thank you,, very educational video

[@rc6865]

very good explanation, thanks for your video, salute

[@MeganSmith-r6t]

Works great cutting lengthwise like that on a dry log, makes an excellent fire starter! Good video, thanks!

[@ClimbingArborist]

Right on 👍

[@gbodman]

I have used saws for many years and not realised that. I have a large sycamore that I have to cut down in the garden. Your advice is very helpful and I will definitely try this method.

[@ClimbingArborist]

Awesome! Glad you found this video

[@matthewpolo227]

GREAT VID DAN--I'VE BEEN IN THE TREE INDUSTRY FOR OVER 25 YEARS AND NEVER HAD SOMEONE TEACH ME THIS NOR DID I EVER REALIZE ON MY OWN...CAN'T REMEMBER LAST TIME I CUT WITH THE GRAIN BUT NOW I LOOK FORWARD TO IT IF NEEDED. I'M IMPRESSED WITH HOW MANY COMMENTS YOU REPLY TO--BE SAFE --CHEERS👊

[@ClimbingArborist]

Nice one buddy, so happy you gained something from the video, it will be cool next time you are ripping wood to test both ways so you see first hand 🤙

[@LTVoyager]

Now someone needs to teach you how to use the caps lock key.

[@kazparzyxzpenualt8111]

I've done both types of cutting to make a knotty section easier to handle. I have noticed everything you have described about the materials rejected. But today you have illuminated and certainly edified my understanding. Never connected the dots before. Thank you.!

[@ClimbingArborist]

So glad the video helped connect the dots 👌

[@jamesstrickland228]

Very informative! Thank you.🇺🇸

[@ClimbingArborist]

Glad you enjoyed it 😃

[@frankensteinrules6511]

Learned something, thanks for the video..

[@ClimbingArborist]

Glad it was helpful! 😁

[@SteeleMagnolia]

Great tip! Found out the hard way, when I was trying to cut up the remainder of the stump (too cheap to buy a grinder). Tried cutting it in sections, because the base is all over the map, and my saw has a mere 20" bar. Cutting from the top is just what you described, DUST, along with an overheated saw/bar/chain. Just trying to keep my chain out of the dirt!

[@ClimbingArborist]

👍

[@gazrathbone]

Wish I'd seen this sooner. I've been cutting big stumps up (the wrong way) and thinking my chain was blunt as soon as I started. Got some more to do tomorrow and now I'm looking forward to it!

[@ClimbingArborist]

👍

[@vincentaguilar1185]

Thanks for the video I was curious about how these cuts would look. Of course they’re not ideal but if it’s necessary to do so the techniques you showed will help. Thanks again

[@esp901]

Very useful information. THANKS🙏

[@ClimbingArborist]

Glad you enjoyed it

[@lotty468]

Thank you very much for that very helpful advice.

[@ClimbingArborist]

Glad it was helpful! 👍👌

[@batmantiss]

I'm not new to running a saw and I never knew that. Thank you!

[@ClimbingArborist]

🤙

[@boatfaceslim9005]

Good tip 👍 Same difference when using a plane. Planing along the grain as opposed to planing across end grain. Massive difference

[@ClimbingArborist]

Right on 🤙

[@James-ns7kc]

Thanks for sharing! Been doing it wrong for many years. Will be trying this out soon. Thanks!!! 👍🙂

[@ClimbingArborist]

Glad to help 👌

[@MrMisaKulicka]

Very helpful, thank you.

[@ClimbingArborist]

Awesome 👍Glad it was helpful!

[@robohippy]

I am a bowl turner. I went to the local chain saw store, where the loggers go, for getting my first chainsaw. They asked me what I was going to use it for and I told them bowl blanks. They suggested a skip tooth chain. Can't remember where I learned that ripping was far easier than end grain cutting. The skip tooth chain does an okay job of cross cutting. End grain is a pain, even with a hand saw. One turner used plastic straws to illustrate why the difference was so huge. Nice piece of holly there. Turners love it for the white wood, but you have to cut it up and dry it out immediately or it goes to an ugly grey color, Well, not ugly, but rather blah.... Those long shavings do clog up the chip port, but if you have the piece off the ground a bit, it isn't as much of a problem.

[@ClimbingArborist]

👍

[@CrimeVid]

I found this out pretty quick when I started cutting bowl blanks ! if you angle your saw downwards, once you have established your line, it goes a little better.

[@ClimbingArborist]

👍

[@mattildahubbardo]

Valuable tip, thanks

[@Longtimerolling]

That's some great info!! Thanks Dan.

[@ClimbingArborist]

This kind of info can be so simple, but often if nobody explains it you can go years without knowing. Glad you now know 👍

[@alanross3435]

Great tip bro! You earned a spot on my very small list of channels that I follow!☮✌🏻 I’ve been doing that for years since my neighbor showed me the trick, he calls the longs strings noodles 😂. Keep the videos coming!

[@ClimbingArborist]

Awesome! Thank you! 😃

[@arnie111999]

Brilliant tip mate thank you so much for that!

[@ClimbingArborist]

No problem 👍 happy to help

[@marknorris5881]

Great video! I recently had some large rounds to split that were 36" diameter following hurricane Idalia. This would have been a great help . Just wait till next time!👍

[@ClimbingArborist]

We were just a little late on this one 😆

[@inherited-shop]

I seem to remember seeing that chains used for making boards with chain saw mills use a different chain/sharping angles for cutting a log with the grain from one end down the length.

[@filipbelak6594]

Very helpful. Thank you!

[@ClimbingArborist]

Awesome, glad you liked it 👍

[@rrssmooth6643]

I usually cut it the good way probably without knowing, just because I liked the long fluffy shavings. Who knew.

[@ClimbingArborist]

I love the long stringy, curly woodchip , it is a Hamster’s paradise

[@B30pt87]

Thank you for sharing that knowledge! Examining the type of sawdust - now it seems important and logical, but I had never considered it. Seriously, thank you very much. (I subscribed)

[@ClimbingArborist]

Glad it was helpful! 👌

[@FISHFANATIC95]

Had no idea, thanks for sharing this.

[@ClimbingArborist]

Glad this will help 👍

[@steven.h0629]

Dang.. the long grain saw dust is great to have around the workshop, thanks! 👍😎✊

[@foldingchaise8387]

Great Video, Thanks

[@ClimbingArborist]

👍

[@dominictaylor6265]

Thanks for that. Even though I’ve used a chainsaw for 50 years! I didn’t know that.

[@simjai1000]

Awesome video mate 🤙 Was taught this method but seen a clip of a Russian fellow making slabs a couple years ago, instead of sinking the length of the bar through then coming in from the opposite end, use the bottom quarter of the tip of the bar and go slowly down at say a 45 angle at the end further away then slowly bring it back, cutting a small groove even to help guide you in thick bark. Also putting a old slab you have handy or something to lift and stabilise the log your slabbing. Saves chains even more 🤙

[@ClimbingArborist]

If you remember the Russian fella’s video, send the link over, I’m kinda interested to see what you mean exactly

[@SouthernItalyHomestead]

So I guess when chainsaw milling maybe a good compromise would be to mill at an angle, if possible? Many times I see people milling perfectly perpendicular to the grain. Or do you think the different tooth shape (10 degree ripping chain cutters) makes up for this? Wonder what the best approach is when milling.

[@jolkraeremeark6949]

Makes sense that you wouldn't want to approach it perfectly perpendicular.

[@ClimbingArborist]

Milling is a different beast. The whole point is to get a smooth finish, hence the chain tooth angle. If you started creating long noodle chips (not that you could with the chain) you might make a rougher surface than going straight. Although I do remember from milling, I used to find it would move a little better doing angles but that might have been a placebo rather than actually being quicker

[@SouthernItalyHomestead]

@@ClimbingArboristThanks for these insights, I haven't done it myself yet and am preparing. These comments have been helpful.

[@oldmanathisbest]

I find your vid. and comments very interesting. Mainly because I've been ripping my huge size rounds of red oak and white maple down to a liftable size for meany years. I thought it was common practice. I rip them through until almost all the way and finish splitting with a wedge. We refer to the wood chips / saw dust as noodles and use them as mulch on the gardens or starting fires. Please keep up with any informative vids.

[@ClimbingArborist]

It seems so simple and obvious, but that’s when you know, or figured it out by trial and error. For those that don’t know… well you see the comments

[@Lucan44.40]

Brilliant tip, thanks. Off to split some chunks I couldn't lift. 😂

[@ClimbingArborist]

Awesome, have fun, be safe out there 😁

[@olehaugan9555]

I actually realized this just last week. My rakers are a bit low and it's jumping around a lot unless i do this. Good tip 👍

[@ClimbingArborist]

👍

[@garyderksen]

Great video. thank you!

[@ClimbingArborist]

Glad you enjoyed the video 😁

[@paulneilson4106]

Been doing this over thirty years and it never occurred to me thanks. Three things, I think there are actually ripping chains. When finishing the cut i put the bar into the kerf and cut upwards. Your chain is really sharp.

[@ClimbingArborist]

👌

[@tomsommer54]

Good advice, thank you.

[@ClimbingArborist]

👍

[@ryanmcclellan6529]

I was cutting a large stump for firewood today and learned this the hard way. Already sharpened my chain ready to fell some trees tomorrow. 😄

[@ClimbingArborist]

Hope this helps tomorrow 😃

[@jpr3665]

Great advice Thanks from Australia

[@ClimbingArborist]

🤙

[@caerlynn7942]

Hi, thanks for sharing your knowledge,amazing!!! What kind of husqvarna do you use, and what length is tha sword?

[@ClimbingArborist]

That saw is a Husqvarna 572 , absolutely love it. The bar is 28”

[@caerlynn7942]

@@ClimbingArboristAs a homesteader I work with a 372XP torq. With the same bar length when needed. Switching to 20 inch bar for smaller diameters. Good machine.

[@dougnelson8121]

Thank you!

[@ClimbingArborist]

You're welcome! 👌

[@ashbucharon8263]

Well there you go! All the wrong things to do and the results of them, was what I just experienced a few days ago. Now it won't happen again thanks to your video. Thank you for your time.

[@ClimbingArborist]

Sorry you found this a couple days to late, but glad you find the video for future cutting 😃

[@JayCWhiteCloud]

Hey Daniel, Great video and facts many, even the experienced aborist, often are not aware of is how chainsaw chain works and is depended on the grind angle and placement in the wood to be cut... For what it is worth, and perhaps warrents a remaking or additional video, is a more succient explanation (this video was a bit too pedantic) technically of what is going on...and...the other applications for cutting wood with a chainsaw... I was an active arborist for over a decade (still part time when needed) and I also have owned and operated several saw mills. A key feature that some commenters have perhaps missed is that a "chainsaw mill" uses a very specific chain type and tooth grind pattern, and that if..."FREE HAND MILLING"...a plank or beam our of a bolt section of log the work is typically done with a standard chain (though specially chains do work better for this too) and is executed precisely the way you have illustrated so well in this video...Thanks again for a great channel!!!

[@ClimbingArborist]

Thanks for your detailed comment, it is much appreciated

[@michaelmccarthy4962]

Awesome Tip. Thanks, I was not aware of this. North Carolina, USA. It would be great for you to tell us what saw you're using also!

[@ClimbingArborist]

Husqvarna 572xp

[@sfleinen]

Dan, good video as always. Just FYI, the techniques you're describing are called "noodling" and "milling" respectively. The "noodling" technique is as the name implies; the chain travels *with the grain* generating those long "chow mein" style noodles, while "milling" is the generic practice of having the chain travel across the tops of the grain (much like getting a "crew cut" hair cut) and generates powdery sawdust. The latter technique, "milling," is used with chainsaw mills -- e.g. Granberg Alaskan -- to make boards and planks, because obviously there's a limit to the size of a chainsaw's bar. You can't cut sideways on a 12-foot long log because you don't have a 12-foot bar nor an engine powerful enough to drive it. (Vintage large-bore chainsaws with e.g. 3:1 gearboxes would, as these were common in the heyday of big lumber like redwood, sequoia, etc., but those are rare collector's items these days. Today's chainsaws -- even the mighty Stihl MS-881 -- are not powerful enough to drive a bar the same length as a standard piece of lumber. So in a chainsaw mill, that's why the "milling" technique -- going across the top of the grain and make powdery sawdust -- is used to make lumber from logs.) Noodling -- generating those "chow mein" noodle chips -- is a great technique for getting through big, knotty rounds fast. I have been doing the noodling technique for decades on extremely large trunks and logs; see my picture on the left, with my McCulloch Super Pro 125 with 52-inch bar.

[@ClimbingArborist]

Wow, such great and in-depth information. Your comments and knowledge are very much appreciated.

[@MultiBikerboy1]

Many thanks🧐👍🏻

[@ClimbingArborist]

No problem 👍

[@davidmullens2464]

Wish I'd seen this video a month ago when cutting oak logs - the wrong way. Thanks, learnt the lesson.

[@ClimbingArborist]

Glad it was helpful! 👍

[@changefortanzania]

If you rip your rounds as he suggests, You will have several bowl blanks for those wood turners to buy or use. Woodturners love wood with lots and Lots of knots. Just cut through the center or pith of the log and it will be more useful to Woodturners. They will LOVE you

[@ClimbingArborist]

Hopefully many people who read this will start making new contacts with woodturners

[@mariolopez-ri8wd]

Thank you much for the information Sir ex video..

[@ClimbingArborist]

Thank you, glad you enjoyed it 👍

[@patterick64]

Nice thanks for sharing... more time for fun !🎉😂

[@ClimbingArborist]

👍

[@kruzanJFD]

Good video, what boots are you wearing, and what model Husky saw is that? Thanks

[@ClimbingArborist]

Meindl Airstream boots and Husqvarna 572xp

[@jimrichard7296]

Very nice.

[@ClimbingArborist]

🙏😀

[@theyuha]

Wish I would have known this sooner. I have noticed there were times when I got the long slivers when I cut a log long ways. Sometimes you have to cut longways because they would be to hard to split for firewood. I split my own wood by hand otherwise.

[@ClimbingArborist]

😃👍

[@dougsaunders8109]

Many thanks for this info. I’m in the process in cutting a massive tree up at the moment which came down in the last storm. I did not know this. Really useful for crotch and large rounds, both of which I have 👍🏻 Edit: nice Husky BTW, mine would have stalled out long before getting through that round

[@ClimbingArborist]

Awesome👌 sounds like your saw might need tuning , carb reset, filters etc

[@dougsaunders8109]

@@ClimbingArborist just a homeowner with a smaller less powerful Husky. Don’t get me wrong, nice saw, especially for a part timer. Yours is in a different league

[@naturewatcher7596]

Very helpful. Didn't realize that it could be such a drastic difference if you rip it from the side instead from the top. The only question is: if you have a smaller saw with the bar which is shorter than the log do you still able to do the rip (not sure how) or you have to shorten the log? Thank you.

[@ClimbingArborist]

Glad it was helpful