CMMG AR-22 Cleaning & Inspection

[@isoplus3513]

I find this video oddly relaxing and gratifying...

[@Musicguy1161]

Great video! Simply a well done, complete video without a bunch of extra stuff and fluff to confuse the situation. Thanks again for all the hard work in putting together these videos and please keep them coming!

[@Blankford777]

The timing of this video was perfect! I just started having reliability issues with my CMMG dedicated upper setup. Gutted and cleaned it (by hand) and ordered a spring replacement kit from Brownells. This detailed video was very helpful. Probably order some spare extractors and firing pins next. I am also going to start running it with my buffer and spring in the gun because I was noticing some carrier shift without it. The collar was backing off of the barrel extension in the chamber and I was getting all kinds of failures to fire. I also think that is what was giving me failures to extract as well, because the extractor looked fine. Only about 1,000 rounds through the gun so far.

[@justinmention7622]

Bring back the Remington 700 5r Build. I want to see how one performs and builds up to.

[@bobcatforever3485]

Excellent informative video! You can tell when a man knows what he is doing! Good job.

[@wesleypipelayer7627]

I have a similar setup. But I use a magwell adapter to run the S&W Mags. Which makes it so much nicer. I hate the cmmg Mags. They suck to load, unless you have a good loader which I haven’t found. And if they are fully loaded the cmmg Mags seem to jam on the first few rounds. I think my adapter is made by “ better mag”. I think that’s who made it. Love it.

[@fireworksguy666]

Wesley Pipelayer how much did you get it for and where?

[@wesleypipelayer7627]

SoCalFisher23. KZbin sucks. It took forever for it to allow me to see your comment/question. brownells. It’s a little fussy. But the mag adapter is well worth it. Rather than loading cmmg magazines.

[@fireworksguy666]

Wesley Pipelayer thanks and no worries lol

[@aharkey1077]

I LOVE that adapter, the m&p 22 magazines are so nice. Only bad thing is on mine the magazine rocks back and forth more then I’d like.

[@123thunderhorse]

Thanks, this task has troubled me for 6 months+! Off to tear it apart this evening, and get it done the right way.

[@TheRollingTrip]

I have the same cmmg bolt, 4.5” barrel kit. It has been flawless to this point. With a Hera SFU, tailhook, and TA poly lower, it makes one FUN range plinker. I can’t wait til my son gets big enough to shoot it.

[@michaelfroelichh9436]

Hey chad did you read what the Missouri rep. Did he put in a bill 11-08 that would require 18 -35 year olds to purchase ar-15's . Thats a rep i need in new york. Lol. An he wants to use tax credits to cover some of the cost. Outstanding

[@pistolgrip44mag]

That is a very bad idea........

[@pffear]

It cost me about $140 for my 22Lr conversion unit for my AR15 and it was well spent...... It added a flexibility to my system that is worth 2 or 3 times what it actually cost me, and it's fun....

[@keithplymale2374]

As simple as an AR is without the right tools and knowledge and skill you can mess one up if you don't know what you are doing. That is why after watching assembly video's I went with complete upper and lower from PSA.

[@AP2020_Outdoors]

Nice tutorial Chad! @Iraqveteran8888

[@eslim95023]

Hey what happened to the 40s&w cmmg banshee video why did you guys take it down

[@AP2020_Outdoors]

Go to my channel I have a couple of videos on it!

[@DrippyBag]

It's back up now

[@bhoward9378]

Thanks, Chad. Great video showing how it's done.

[@Ech0wun]

I use a Tapco hardened firing pin and have not had to replace it. The standard pins break every few months.

[@kenhelmers2603]

Nicely done, thanks Chad and all there!

[@PeakBeat]

Let's see how long it takes for KZbin to remove this video Good video always wanting to learn about firearms

[@texpatriot8462]

Did KZbin make you take down your videos on how to build an AR?

[@modnednl7344]

that cleaning device , looks like a deep fryer :)

[@bradjohnson5323]

If you filled it with peanut oil you could probably use it as deep fryer, you would just have to clean really thorough, unless you like lead poisoning.

[@modnednl7344]

@@bradjohnson5323 haha I know right nobody like te get lead poisoning , goodafternoon to you , and greetings from Netherland :)

[@cloudpuffer224]

So if I use my GI bill for the gun smithing school at the beggining what do I leave school with? Is it a certificate program or a degree?

[@georgelong4888]

Depends where you go. Call or email them and you'll have your answer. Since most Gunsmiths are self employed you need to keep that in mind too

[@texpatriot8462]

A lot less money in your pocket.

[@obiwan5667]

Great video..very detailed and clearly demonstrated ..... good job...

[@richarddixon7276]

Chad You reassembled that .22 quicker than most folk can change a set of plugs in a car , that's a Well practiced procedure ! Nicely done & thanks for the watch & learn . But why didn't clean the cotter pin for the firing pin ?

[@andys6905]

Does the can try to back off when you've been shooting? Do you have any tricks for that, or just keep an oven mitt handy?

[@grizzly9960]

Don't lie, they are off camera holding you at gunpoint saying it better be cleaner than new when you are finished with it ;-)

[@joehall1114]

A magnetic gun mat, that's a great idea. I'll have to pick up one of those.

[@sparkplug1018]

I need one of those, up till now I've been doing all my work on an old cookie sheet with a rag on it.

[@j0eblden342]

Woah! That's a tiny gun! Mabey the smallest of its design I've ever seen!

[@AaronBrand]

I was looking for a "how to clean my cmmg 22lr conversion" video. After watching this, I'm pretty sure mine doesn't need to be cleaned, yet! Btw, can I use the same cleaning solution that I use for cleaning my brass?

[@dak4465]

I love full auto .22s I want to put a bullpup stock on one

[@tylers.4506]

Go with a Franklin Armory BFS or a FosTech Echo more reliable and practical than a bumpstock

[@rileyneufeld7001]

So are the dimensions the same for the charging handle? A cheap 10$ raptor style charging handle, filled with some type of resin/filler in the valley would work then.

[@roteroktober360]

if you put a blued bolt (e.g. K98k) in an ultra sonic for some time to get it cleaned, will the blueing get damaged or not?

[@mohammedcohen]

How does the barrel/breech adapter secure to the barrel/chamber extension??? I'm going to try and remove the one on my Douglas heavy barrel...had it built back in the mid 90s by Derrick Martin of Accuracy Speaks in AZ...he used Red Loctite to secure the adapter, so I'll need to heat it with a Bernz-o-Matic...

[@CharlesVanNoland]

Thanks Chad!

[@mikebottorff593]

Omg i been using my ar charging handle the whole time should i get a new 1 just for the kit or a new 1 for ar ?

[@tamminicholson5060]

Awesome, thank you!

[@The_Noticer.]

Very cozy content

[@tehyeh]

This is a great ASMR video

[@addmeperson3986]

HEY CHAD, can you please please please tell me where you got that poster with all the ammo on it!! you can see it in 0:37

[@auto_sear]

Start by googling "bullet poster"...

[@ilalgopro283]

U

[@addmeperson3986]

@@auto_sear nah, that makes too much sense thou....

[@RJM1011]

People have those posters every year at the NRA shows.

[@Haisjoj]

How do you dispose of your used ultrasonic cleaning solution?

[@savitbharadwaj4023]

Whatever happened to 40s&w banshee video that you guys uploaded and then took down the other day?

[@solidsnake4167]

Hey when are you guys going to do a Gun Gripes video on the house passing HR8?

[@Elfin4]

Guys could you do a video for beginner scopes suitable for a Centre Fired rifle such as the Tikka x3 Tac A1 in 6.5 Creedmoor and associated suggested scope mounts that can provide a MOA adjustment

[@draganbalzic4493]

Why do you worry about your Ti parts in that solution when Ti is far more resistant to corrosion than stainless, inconel and or aluminum?

[@addmeperson3986]

fun fact, everyone on Earth was the youngest person at one point!!

[@filipskotnica971]

Also fun fact: You never stop clapping, the interval just gets longer

[@addmeperson3986]

@@filipskotnica971 Fun Fact: the average number of hands on people worldwide is less than two.

[@HaveRandomQuestions]

Another fun fact: Fun facts are fun :v

[@jdirt1982]

@ 1:45. OH. DONT STOP. DONT STOP !!!!!!!

[@haydenknowles7798]

Guys I feel ur pain about the bans I'm in nz and my heartfelt condolences go out to those affected by the shooting but they are now talking about banning semi auto firearms 😫 and so many people are on the band wagon and we don't have a 2nd amendment to protect us. HELP😔

[@markbrown4597]

What kind of stock is that on the ar 22?

[@addmeperson3986]

does this count as a pistol, or a sbr?

[@dak4465]

*an

[@Stevarooni]

If the receiver is a "machinegun", that status overrides pistol/SBR status, so just the one tax stamp (with a separate one for the suppressor, of course).

[@cesilio]

Chad Chad your turning into Eric

[@PeliKarhu600]

Are you going to do new gun gripes soon?

[@mohammedcohen]

.22 LR can make any firearm filthy right quick!!!

[@sparkplug1018]

Damn, and I thought my AR-9 got nasty after a long day at the range.

[@ayayron7776]

Nice

[@SM-cg2dc]

Cmmg told me to use a, “Round” hammer, what are they meaning?

[@Dead_guy138]

S M ball peen hammer

[@larryw5429]

Drop gun in gas and diesel and walk away for a day lol.. Pick up Blow off and oil and send it!!

[@paule1983]

How much $$$ w/can?

[@DFox-ud3gx]

I call all ar's dirt merchant's..

[@GTGallop]

You want to show people how dirty an AR can get? But you used a 22 blow back instead of a 223/556 gas impinged system. So it sounds like you are going to show me how dirty a Ruger 10-22 that LOOKS like an AR can get. Apples to oranges, Gents. Try again and remember your ammo must be at least 40 grains to be a real AR.

[@randomhobby3729]

I would soak on kerosene, its too much dirty

[@hoopstar7891]

I am the first comment

[@kartoffelbrot1498]

1st

[@martinkitevski7056]

7th lol love you're videos