Love the stability of the cut. No bad harmonics, just clean, consistent chips. Only downside is the mess the steel needles make when you try to run them through the chip conveyor...
@13anomalous16 Жыл бұрын
I'm noticing how the linking moves between each toolpath is fully 3 axis motion, as long as there is no stock in the way. It's a tiny detail but really cool since most of the time there's a Z retract before positioning X & Y to the next lead-in.
@MrLembnau3 ай бұрын
Yep its so the tool doesnt rub on the floor during the linking move
@themonkeyprojectАй бұрын
@@MrLembnauhe's talking about the moves between toolpaths. Not the transitions between each step over.
@taylorcurtis6187Ай бұрын
A lot of cam software has options to keep tool down or limit g0 rapid movements
@powylamywany89782 жыл бұрын
Why did you do everything with one tool? Use a face mill at the beginig and ball at the end and you are down to 4,5 min and extend your tool life.
@mjshorty192 жыл бұрын
Was not remotely worried about cycle time. I was just messing around and wanted to only load up one tool for this part
@Mike-ff7ib Жыл бұрын
A tool change didn't seem necessary to me.
@steinhausenzg20254 ай бұрын
I agree with you, I would also add an end mill and a spherical cutter. And it would be cheaper in relation to the price of the product. A 20 mm end mill costs $140
@CncFrezar Жыл бұрын
Very good job👍
@ipadize Жыл бұрын
which CAM program did you use? Those Linking moves look sick
@3073Sean9 ай бұрын
Very cool tool strategy!
@nigels67862 жыл бұрын
man I miss machine work too bad the money wasn't there here where I'm at. I'm doin line work now
@davidawaters2 жыл бұрын
What’s tool life like at 1350 SFM (5/8” at 8250 rpm)? I need to do some experimenting I think. I’ve been running more like 400 SFM.
@Max_Marz Жыл бұрын
Study chip thinning
@brandonrenwick9125 Жыл бұрын
1018 or any 1000 series of steel are the aluminum of steels. you can really feed it hard and go very fast. uncoated carbide is prolly good at 5 or 600 sfm but anything with altin alcrn tialn coatings your talking 1000+ sfm. that coating produces a thin layer of aluminum oxide on the tool at high temperatures. which resists wear to the edge. which is why its better to mill steels with air blast only when using those coatings. using coolant cools the edge too fast and chips it up, fracturing the coating until it breaks away. which snowballs into a mess quickly. because you no longer have the oxide being produced if there is no coating.
@steinhausenzg20254 ай бұрын
Одной двадцаткой 🤔 интересно)) а мы бы начинали с хай спид 25 и заканчивая фасончиком 😁😁
@dolfstromer34982 жыл бұрын
Nice chips)
@williamross17782 ай бұрын
Is this Timelapse’s?
@synooptic547510 ай бұрын
Hello experts, do you recommend which machine for milling hard steel for a budget of 6000 dollars? THANKS
@Dillybar777Ай бұрын
Spend the 6k taking your work to a shop. No worthwhile machine for that much money
@pmsilvei2 жыл бұрын
Wow! 🤤
@andrewlozinak273 Жыл бұрын
What machine is this
@mjshorty19 Жыл бұрын
An old Mazak VCN 530C
@andrewlozinak273 Жыл бұрын
@@mjshorty19 could I use this machine to make slides for 3 printed firearms
@mjshorty19 Жыл бұрын
@@andrewlozinak273 Guess you could if you had the proper licensing to manufacture firearm parts