cnc plasma $650 for driberif85 and cnczone good luck

my machine is real dirty. been doing alot of cutting.and less painting. this is for the guys intrested on cnczone

[@jeetendrag10acc2]

beautifully simple....simply beautiful

[@maxtorjoe]

hola saludos desde Venezuela felicitaciones eres el mejor!!! Hello greetings from Venezuela congratulations you are the best

[@d9electro1]

cnc zone is pretty cool. i like the free file downloads.my dxf stock pile is growing. and seeing the pictures of other builds inspire me. i have purchased some new rails and more motors for a new build. currently building a new garage for the new fun.\ man cave. close to finishing. so the new projects wont be to far away. this is additive so becarful. seems like i want more and bigger builds. thanks for your post

[@histufly]

Good going! I was wondering if there is some guide bearing on the Z since it reaches down so far. All I see is a long plate though it makes a lot of sense having the cutting down low to keep some of the dirt out of the bearings. Putting the bearings outside of the side rails also looks possible.

[@TheWreckingYard]

Just thought I'd say nice work, I think I'll do something similar when build my plasma table.

[@d9electro1]

I did this for me. this will help me on other projects I do. I would think if you had one and went to a few local fabricating place's. they would farm out the extra things they don't like or cant complete on time. d rings, machine numbers, etc...

[@Pilbromatic]

That's pretty slick!

[@d9electro1]

thanks. i seen your vids, slappn the bass thats pretty cool too.

[@d9electro1]

my shafts are 5/16 and i put a coupling on it. the outside dim of the coupling is the size of the bore in the sprocket. got that idea from the anna jones guy. build your cnc he does the blacktoe table. and i think he sells spockets and couplings as well not bad priced

[@ricardoalbuquerque6619]

parabéns pelo projeto

[@d9electro1]

@FJoeForty i had the same thought.however keeping cost down this way i dint have to two idler pulleys.also this was my first build. the next will be timing belt, this machine will help me build the next. thanks for posting

[@d9electro1]

i micro step by 16. so with the sprocket sizes i set my steps per inch around 853 or so.

[@d9electro1]

it worked right out of the box. so far

[@avsilva10]

very Nice, congratulations

[@d9electro1]

i had ordered the #35 chain and it came in 10 foot length's. but built a 32 by 34 inch table. was easy for me to manage for the experiment proto type. but you can make what ever size you want or have room for. however I have to have my metal cut down to fit in the table. so over 4 foot would be nice but this table fits in my shop. thanks for watching

[@ralphmc31]

i notice its been a long time since you built this do you have a how to guide some where?

[@d9electro1]

@ptcplasmasc11 i use sheet cam and you can set up your tools to what height and speed to move to.i dont have a moving height control. in fact i think i could set the height without a z axis and do good with it. powermax 1000 plasma cutter, sets right at an 1/8" before pierce.but my z axis raise's the torch while moving between cuts. im sure its not the cleanest way to cut but works for me.

[@jmgreen1968]

was wondering what kind of resolution are you getting with the chaindrive thanks for your time

[@FJoeForty]

I wanted to try a chain type linear motion like this for a plasma table. I didn't like the idea of having it suspended under tension, but rather resting on a rail or within a channel instead

[@4nbr3nd]

Hello, very nice CNC plasma. Just wondering how you coupled the 1/4 shafts to the sprockets for the chain drift.

[@d9electro1]

my thoughts, chain is ok. i think belt would be better for plasma. and i bought screws for my next build but its going to be router.dont need the speed like you do with plasma on thinner material.i have seen some mix with rack belt screw.there is a cool belt build on cnc zone.

[@RUBIOSCNC]

as they are called barbed fittings for the motor you used? como se llaman los acoples dentados que usaste para el motor?

[@772777777777777]

You should post what kind of plasma machine your using. are you using a inductive start ... reg hf start or..Blowback start without the need of High Frequency

[@PedroMoralesRuerte]

Parabéns pelo seu vídeo: por favor que tipo de corrente e engrenagens vc usou ? por favor passar o link da loja.

[@repalmore]

There is another CNC table that used chain also. I like their idea of supporting the chain so it doesn't bounce and affect the cut. With a small table like yours I'm guessing that the chain bouncing with the change of direction isn't a big problem. Thanks for sharing.

[@osejijustin2957]

Look great. What's the size of your Y-axis stepper motor.

[@blissman20]

This is one of the better CNC Plasma table builds I have seen so far, is there a forum outlinning this build? It looks alot less complicated than some of the others out there. Great job.

[@d9electro1]

I watched a lot of cnc builts. on KZbin so I thought I would post to carry on the good will. no forum on the build. I played it by ear. most of the questions have been asked in the old posts. but if you don't see what you need. I'll do my best to remember. I still have this machine

[@blissman20]

+vincent starcher thanks!! I think I will start my table with a kit for the stepper motors from hobby CNC. I plan on gather parts soon then building this summer after my shop is finished

[@d9electro1]

354 oz motors. they were not much more than the 270 oz kit so i got the 354's i have a lot of top weight so i think the 270's would be fine with a better gantry set up. also if your looking to save i think timing belt would be cheaper. thanks for watching

[@samuelcalderon3807]

Hello its great the system this chain where coukd i buy?

[@leokuan3676]

i see you got the cheapo ebay chinese 4axis driver there. Have you implemented the fix they put on cnczone? or did the board work without missing any steps right out of the box?

[@nikobr9]

Hi, do you believe that the current transmission system would give good results in Router for (MDF) Woods?

[@BrutusJones]

Nice work! I noticed you appear to be using a four axis TB6560 driver board. Have you had any problems with it ? I have one also but have not been able to run my motors very well with it. What software are you using to control it with? Like Mach3 or what?

[@Smokey3agle]

How do you fire the torch with this design?

[@d9electro1]

#35 chain. has a 3/8ths pitch

[@d9electro1]

sorry for the late post. nema 23 and its #35 chain which has a 3/8" per link step

[@danorama2007]

you should make some plans for this thing and sell them.... I'd pay 200$ all day for plans

[@Mike-qh5bn]

That drive chain needs some more work, support to prevent stretch, the sprockets don't have sufficient contact with the chain and could skip under load, the wires are drifting about and chafing on the drive chain. Best fix the design issues if you want reliability.

[@d9electro1]

Indeed you are correct on all counts. I haven't changed or adjusted a thing on it other than wire chains. It's still works well then years after its first cut. By all means it's not perfect. Getting ready for a new build because I need more space in my garage. More of a off to the side build. With movable table. So I can use table when I'm not working on metal projects.

[@Ombhandmade]

hi, what size mena are the step to step engines ? how many amps or Nm are? thank's

[@magicmarker1369]

Hey are those .5" pitch chains?

[@warchild69ATtheZCR]

What size stepper motors are those?... I'm on cnc zone reading up, and about to do a 4'x4' build byself... but am torn on what size motors I need... My table will be much like yours... very much in fact... just deciding on what type of drive I will use, chain, rack and pinion, etc....... Price is a motivator!

[@ikecobey6268]

Hi it's been 8years this video how is doing your cnc gantry do you encounter problems on this setup thanks

[@d9electro1]

I still have it.still works well. just made a bumper for a friend with it.took the z motor off but if the metal doesn't warp it does great. goimg to make a 3 in one machine. router, plasma, lathe

[@patthantaweevongsa8970]

I would like to talk about your cnc system in business if you still produce, please let me know. Thank you

[@d9electro1]

@kw2169 i have two motors and set one of them as a slave drive in mach 3

[@Ombhandmade]

the motor, that type of Nema is? ( model is better) .. and the dimension of chains..?! thank's

[@1990notch]

Any idea which is most reliable drive to use for plasma? It seems to me rack and pinion may be prone to getting grit or other particles in the teeth. I tend to think chain or belt may be more tolerant of that stuff though the rack and pinion would seem more precise in positioning with no play or slop.

[@abbasjabr9827]

pls.Iwant to bulid cnc plasma cutter 3mx3m what size of steppe motor (nema). the breakout name and type and the drivers .with regard.

[@molinobeer]

with that setup your motor bearings suffer alot

[@pallermo]

Nema23 or 34?

[@user-uc1rt9jc8z]

精度咋样啊

[@j.swipes]

Did you make it yourself then ?

[@d9electro1]

I did. My first. Getting better

[@BrutusJones]

Oops Ok I see you've already posted the same info as my previous question. Please disregard my posts.