CNC Plasma Business From Scratch | Pt. 1

Thanks, to JD's Garage for inspiring me to make this DIY CNC Plasma Cutter.
Products used in the video/Amazon associates links(I earn commission if you choose to purchase these products at no extra cost to you)
1: 608zz bearings -
amzn.to/3vJOEJj
2: r4-2rs bearings (smaller ones, x-axis) -
amzn.to/3xbFCVS
Welcome, fellow creators and aspiring entrepreneurs! In this compelling video, I'm embarking on a transformative journey towards self-sufficiency by constructing a CNC plasma cutter from the ground up. With a focus on precision engineering and innovative design, I'm harnessing the power of CNC technology to revolutionize the fabrication process.
Join me as I delve into the intricate world of CNC plasma cutting, exploring the ins and outs of this cutting-edge technology. From selecting high-quality materials to fine-tuning the software for optimal performance, every step of the process is meticulously documented for your insight and inspiration.
But this video is about more than just building a machine-it's about building a dream. By taking control of my destiny and forging my path as a small business owner, I'm proving that with dedication and determination, anything is possible. Whether you're a seasoned maker or a budding entrepreneur, there's something here for everyone to learn and grow.
So, if you're ready to unlock your potential and embrace the freedom of being your boss, hit that play button and join me on this empowering journey. Let's ignite our passion for innovation and carve out a brighter future, one CNC plasma cut at a time. Don't forget to like, share, and subscribe for more exciting content! #CNCPlasma #PlasmaCutter #SmallBusiness #Entrepreneurship #Innovation #DIY"
The above video description may or may not have been made using an A.I software lol. Anyways guys thanks for watching!

[@sharpsticksnz4112]

Looks great, I'm here because although I like the low price of the JDs garage cnc I cannot get over the one sided cantilever design. I just couldn't bring myself to build something with a fundamental lack of rigidity. Especially when accuracy is the goal. Thanks for the videos. Agree with others all holes should have used drill press. Tubing wall too thin, definitely need anti crush tubes on that thin wall tubing.

[@ThyialIndustries]

Yes! All good ideas for the next build.

[@jakelords24]

I did the same and made my own pro edition! Works great. I'm also working on a prototype to do all metal and no plastic(even though I have 3d printers)

[@ThyialIndustries]

Awesome! I think when this one is all done, I will make another. I've learned a lot, and there is a lot of room for improvement.

[@sevaguillon1619]

Love seeing this. I’ve been running a CNC Plasma/Oxy for 12 years. I’ve been wanting to start my own side hustle with signs and things like that! Taking that step is scary though for all the money you need to spend to get going 😢😂

[@ThyialIndustries]

100% agree! That's why, to fund the project, I had to find the most efficient way to make money while spending as little as possible. If you saw the first video in the series it walks you through the steps I took for that. Was it a perfect plan? No. But it definitely got me started.

[@davidhofman4341]

Fabricate steel bushing spacers to install on through bolts in tube. A tight fitting bushing will keep the tube from deforming when you tighten bolts.

[@ThyialIndustries]

Yes! They had some 3d printed ones but didn't want to use those because they were plastic.

[@davidhofman4341]

@@ThyialIndustries need to be al or steel

[@ThyialIndustries]

@@davidhofman4341 agreed

[@eclecticmakerspace]

Best of luck in your new business! You're off on the right foot!

[@ThyialIndustries]

👍👍👍🙏

[@puntabachata]

Dewalt has some great step drill bits that I use with a cheap drill press. They easily go thru 2" steel square tubing (and angle iron too). I bought them from the big orange store. Also bought a portable band saw with included table from amazon (Anbull brand but would have preferred the vice clamp that comes with the nearly identical Vevor) . With a magnetic level to make 90 cuts it works great, giving very clean cuts.

[@ThyialIndustries]

Unfortunately I didn't have a depot near me. Only Menards lol.

[@agguilarmetalwork4494]

Nice work and yes I will buy your plans 👍🏻🍺🤜🏻 editing of the videos is great 😆

[@ThyialIndustries]

Awesome. Thanks!

[@tiagoleal7061]

Você é o cara !!! Muito legal a ideia !! Estou esperando as proximas partes

[@ThyialIndustries]

Thank you! Excited to show you guys the progress so far

[@staticvoid1337]

Great stuff, on the same journey myself but with an upgraded workbee CNC router. Keep going!

[@ThyialIndustries]

Awesome. Will have to try a router sometime in the near future

[@sickpuppycody]

Great stuff brother. Looking forward to the future videos 🤘

[@ThyialIndustries]

Thank you!

[@mattodombigoscustoms9957]

I'm waiting to build me one also

[@ThyialIndustries]

Highly recommend. I've learned allot!

[@dlrgarage6744]

I for one I’m definitely interested in the plans for your machine. Can’t wait to see the final result.

[@ThyialIndustries]

Noted. And me too!

[@bobrossi1185]

Definitely great build iam in process of building dual y axis i did too my build is going slow

[@ThyialIndustries]

You post any videos? Would love to check it out

[@bobrossi1185]

@@ThyialIndustries nope getting ready to cut all my tube just trying figure out measurements for 36 x 48 cut area and then how big to make water table only want to cut tube once trying to figure out length of y and x tubes.

[@ThyialIndustries]

@@bobrossi1185 ahhh I see. Yeah the set up process/design took me the longest too

[@davidworthington9118]

I have made a JD's Garage plasma cutter its great, the only problem its not big enough, I want to up scale mine so it takes a standard sheet, in the UK we get 8' by 4' and 1250mm by 2000mm

[@ThyialIndustries]

Mine will be able to fit a full width sheet. If I need the full length I'll just have to use saw horses or something similar

[@davidworthington9118]

@ThyialIndustries have you used it yet?, mine has Z height control, wantvto post some pics

[@ThyialIndustries]

@@davidworthington9118 I have not used it yet. I haven't purchased my Hypertherm. Also have not added the z-axis or any limit switches. But soon!

[@mikeprestone8367]

Kinda cool what you’re doin here. I’m significantly older than you but my journey is extremely similar. Keep up the good fight. Pretty soon you’ll be all about linear rails and tuning servo motors. And then…. You’ll figure out that the money is in being an expert at your skill, let others make the equipment and crank out parts because you did all this and figured it out. Enjoy the journey!!!!! Even though I could make my own machines (around 30 so far) and even sell all of them…. The minute I purchased a commercial machine (God forbid) and made parts for others… that’s when real cash knocked on my door…. Just sayin… love your work!

[@ThyialIndustries]

Thanks. I appreciate it. Would love to purchase a larger commercial machine! But we all have to start somewhere right. We will see where this ends up

[@juancarlostraconis9102]

With this system You can build a 4x 8 just extend the y axis?

[@ThyialIndustries]

Exactly! Definitely on my to do list

[@thedadchronicles]

"Why do the work that other's have already done for you." The sole reason I'm watching your videos. I know you mentioned you had extra material to make more brackets, tell me how much. I live in Georgia, I'll take care of shipping if you are interested.

[@ThyialIndustries]

Will keep this in mind. If I decide to sell a few I'll let everyone know!

[@nemessmu]

Hey good job I was not able to find in the comments the size of ur machine. Can you share it with us what was the end result LxWxH

[@ThyialIndustries]

4ftx3ftx3ft

[@silverify]

metric is much easier to understand.. and maybe more precise.. I don't know.. I was thinking how about to make machine to run, then cut and make parts with machine and replace the parts you cut by hand

[@ThyialIndustries]

You could for sure do that. But I already had the machines to do the work for me

[@davehammond9796]

What is the sheet capacity? Looks like it's 4' x 4'. Good job and good luck.

[@ThyialIndustries]

Thanks! It's a little bigger than 4'x3'

[@davehammond9796]

@@ThyialIndustries Thanks, so it's 4'-3" x 4'-3"? Do you plan on selling a list of your modifications to the JD's plans?

[@ThyialIndustries]

@@davehammond9796 haven't fully decided yet. But there seems to be some interest. Maybe in the future.

[@wombleok112]

What a wonderful inspirational chap you are .. im not in the business but following you will help me with my current project

[@ThyialIndustries]

Awesome, glad to help out

[@nataliebudde186]

how much for a snail?

[@ThyialIndustries]

You can't afford one lol

[@dlrgarage6744]

Awesome video and great job. I’m just finishing my JD’s garage cnc. I’m down to the software

[@ThyialIndustries]

Sweet. What kind of plasma cutter are you going to use? Trying to purchase mine soon. Might go with the hypertherm

[@bondroid4639]

Hey here's a comment for boosting purposes. I was surprised when I noticed your channel is not big yet: the way you made the video is very professional, I wish you luck and will be waiting for the next video

[@ThyialIndustries]

I appreciate that. 👍👏. Every comment counts.

[@kaylummcauley5548]

Keep going I wanna see it finished

[@ThyialIndustries]

That's the plan! Working on mounting the motors and belts as we speak

[@terrywalker8634]

Get video , I order j d garage plans myself I’m eager to get my machine built . Can’t wait for the next video

[@ThyialIndustries]

It's been fun so far!

[@adrianarce9427]

Nice video man. Inspired because I want to make one of these but I also suck at drilling straight holes. I don't have a drill press. I would also have a hard time making those plates but I could just buy them from jdg. Or you could sell the plans and plates for this bigger one I'm interested

[@ThyialIndustries]

Awesome! You should definitely give it a try. I'm learning alot along the way.

[@lucasfairbanks]

great video how long did you make your gantry arm? from edge to edge?

[@ThyialIndustries]

If I remember correctly I think it's like 52". I made it so I could fit a full width sheet

[@john_free_thinker]

First!!!! Also, good video 👍

[@ThyialIndustries]

Thanks John

[@john_free_thinker]

@@ThyialIndustries anytime 👍

[@kerryholt7102]

I recently built a jd garage table the z axis is giving me trouble, never wants to touch off

[@ThyialIndustries]

I have yet to make a z axis. Hopefully by the time I have my next video out I will if the part don't

[@puntabachata]

Your square tubing looks a little thin. Probably why it deformed...

[@ThyialIndustries]

Yes it's thin. Partially by design. Trying to keep this as cheap as possible. But I'm already jotting notes down for a certain 2!

[@ThyialIndustries]

Version 2**