CNC Router Project Weekend Update - NEW CNC STUFF

[@IDCWoodcraft]

Sign up to CNC Insiders here → idcwoodcraft.com/cnc-lp2-free-files/

[@FALCON390CNCWorks]

Hi Garrett, Clamp looks good. Im looking forward to the clamp and a new bit. All the best.Jacob

[@IDCWoodcraft]

Falcon, glad you like it! I will keep you in the loop on it all.

[@BobBob-eh5sb]

Yup, I like the clamp 👍

[@IDCWoodcraft]

Bob, glad you like them my friend!

[@jerrybradley1420]

Hey Boss those look like some nice clamps . Hope to see them on the store soon

[@IDCWoodcraft]

Jerry, it will be very soon brother! I will keep you in the loop.

[@mikejackson3320]

Gotta have the clamps!!👍

[@IDCWoodcraft]

Mike, thanks for letting me know my friend!

[@blazegbs]

Good video Yes on the clamp. Would you like to see an oops moment when I fat fingered the settings for a HOG? Chewed through a 1" chunk of walnut in 55 seconds flat on a NW SD-100.

[@IDCWoodcraft]

JR, that is quite a lot of cutting in not a lot of time brother!

[@davidpavlik8031]

Garrett my opinion those clamps are a game changer. I want 4

[@IDCWoodcraft]

David, right on brother! I will keep you in the loop.

[@ozguzzi]

Those clamps look like they hold tight to the fence, also hold downward pressure to the spoil board. Used to use something similar on the BridgePorts, and they worked very well. Cool, I like it!

[@IDCWoodcraft]

Ozguzzi, glad you like them brother!

[@daviddanboise1601]

Hi Garrett. I was able to get your new bit and have a project on mind to try it out. I will let you know very soon. As for you clamp I am definitely interested. If there is one area in my CNC setup it is the areas of clamping. It takes me much longer than I feel it should to hold down a piece of wood on my mill. What I just saw you demo is amazing. Funny but being a mechanical engineer I had been thinking about looking into a different clamping system than I currently use. Your idea is awesome and I would definitely be interested in your clamp. Thanks again for all you do for this community. I know you have helped me a great deal. Also I am waiting for your new “beast” to be released. I love the hog but the beast would definitely speed up my bowl making.

[@IDCWoodcraft]

David, ok thank you for letting me know you are interested brother!

[@michaelbruner3555]

Garrett, you are the 2nd person I've seen use these clamps. Looks like a very good design. I would have to change my spoil board. Looks like it would be worth it!

[@IDCWoodcraft]

Michael, glad to hear you like this idea brother! I will keep you in the loop.

[@bubba6945]

that is so awesome onward christian soldier. thats the first design of that nature ive seen love it and that chair looks great now we see it assemble. I looked at some at the local stores and they run about 200 bucks but made fom composite material

[@IDCWoodcraft]

Bubba, glad to hear you like that design! It should be a great video.

[@tomcollick8111]

Garrett, Will you be making the Adarondak chair CNC files available?

[@IDCWoodcraft]

Hi Tom. Yes!

[@JoeLazzara]

Yes on the clamps, but I'm still loving the wood ones from your file. I'm so glad I got the 3/16" compression bit while you still had it in stock, I knew they'd be gone quick. I'm happy to be one of many to help wipe you out of them lol.😁 Have a great weekend with the family, dude. 👼❤️

[@IDCWoodcraft]

Joe, thanks brother! I will have that 3/16 compression back in stock soon!

[@ShoHashi]

That clamp looks very nice! I'd like to get my hands on those! :)

[@IDCWoodcraft]

Sho, glad you like them my friend. I will keep you updated!

[@tomcollick8111]

DEfinately would purchase those clamps.

[@IDCWoodcraft]

Tom, right on thanks for letting me know!

[@williamcovell6324]

🌵 So now you're a '2-bit' so-n-so 🤣🌵

[@JoeLazzara]

Good one Bill. 🤣🤣👏👏 He's got the two bits there, so I guess that would make him one. 🤣

[@IDCWoodcraft]

William, very true brother! LOL

[@007MrDean]

Love that clamp! Getting ready to make a purchace on your CNC router bit starter set. Looks like everything I need to be dangerous. I take delivery of my Onefinity sometime in June. At this point I just dont know what I dont know. Just following all the info thats at my disposal hoping it all makes sense when the time comes! Your videos are great and informative. 👍

[@stlwoodworking]

He supplies quality bits. I have several including the new 3/16 compression bit :) Never had any issue at all with the quality.... the 1/4 compression will even cut through screws LOL I do not recommend it though! He always ships with a personal message to you as well as a little suprise inside..... Garrett, we need to talk about my diabetes LOL

[@IDCWoodcraft]

Dean, I have a bit set that is exactly what you need starting out. idcwoodcraft.com/products/the-only-truly-complete-cnc-router-bit-starter-set-w-free-projects

[@jerrybradley1420]

Look into the 1/16 bit he has it works great . You will need it when you want small fine detail.

[@I.D.Kworkshop]

Yes, please make and sell these clamps

[@IDCWoodcraft]

Dave, will do brother!

[@danhill5182]

Hi Garrett, I'm really interested in the clamps

[@IDCWoodcraft]

Dan, right on brother. I will keep you in the loop!

[@rogersecura5181]

I really like those clamps you created. I have some low profile clamps, but I never liked bolts sticking up above surface of the wood. I am curious if the bottom of your clamp has multiple holes to adjust the pegs to different spoil board hole spacing. I don’t want to have to re-drill my spoil board - Of course price will also be a big factor.

[@IDCWoodcraft]

Roger, very true. You want them to be as low profile as possible.

[@jerrybradley1420]

How did you like the fire dept patch from Bonifay Fl.

[@IDCWoodcraft]

Jerry, That was so cool brother! I was ecstatic when I got that.

[@HGANGHONY]

Is there .25 shank end mill bit that can cut 1.5 depth with a smooth finish? I seem to be having trouble getting a smooth cut using my current bits on the end grain portions of my projects.

[@IDCWoodcraft]

Gary, this downcut should give you a really good finish. Here is a link: idcwoodcraft.com/products/long-1-4-router-bit-for-cnc-trim-routers-1-4-shank You might also need to run a finish pass to get a good clean cut!

[@jimpalmer1944]

Garrett, when do you expect he new style clamp to be available?

[@IDCWoodcraft]

Jim, I'm sorry brother I was working with the supplier to offer these for sale on the site, but he is no longer producing them.

[@keithwalessr799]

I would be interested in the clamps

[@IDCWoodcraft]

Keith, thanks for letting me know brother. I will keep you in the loop.

[@reece674]

On the topic of the chair components and how you said it wouldn't work on the machine with the shorter (I'm assuming) Y axis, I have seen a video on here that was done by Jonathan Katz Moses where they use a pinning technique to be able to process basically an infinite length on the Y axis. I'm not sure if you would be interested in doing a video on that in your own style as JKMs was run through pretty quickly but just thought I would mention it to you.

[@IDCWoodcraft]

Yes, that is a method called tiling. I've considered the chair using that method for smaller platforms but honestly, the chair design has taken a lot of time. I probably won't do the chair in another video. Perhaps some other project

[@reece674]

@@IDCWoodcraft that's a fair point, that chair does look quite in-depth and an awesome design.

[@jimmytodd1269]

very nice design indeed any idea what the cost would be as of yet or are you in the development stage at present?

[@IDCWoodcraft]

Jimmy, I am still working out cost. I will keep you in the loop.

[@henrymach]

Waitaminute... You designed this clamp? I always thought it was from Tim Spiker

[@IDCWoodcraft]

I have tried to communicate with him many times. No response.

[@wcgraham3609]

clamp 👍

[@IDCWoodcraft]

Chris, thanks for letting me know you are interested my friend.