Chevy HHR heater fan replacement simple and easy

There is also a new heater/ac fan that comes with a bracket and screws you can use instead of the attwood 7200. But you still have to cut out the old fan the same way done in this video. A razor knife will cut out the old fan pretty easily.

[@CodytheCarGuy]

www.codythecarguy.com www.codythecarguy.com/store www.codythecarguy.com/forum

[@rdrrr468]

Cody the Car Guy I watched your video and found something better. Parts geek has a replacement part for $60 new. Cut the old out like you showed us but the new part just screws right in. Part # 75778 flanged vented CCW blower motor W/wheel. Just plug and play. Hope this helps for future installation.

[@lutherwilliams3098]

Cody knows what he's doing for sure.

[@StJamesGraphics]

Our fan stopped then after 4 months with no money to fix the check engine light came on two sensors were changed and that fixed the fan, missing and $435.00 later everything works again!!!

[@nashsclay]

Hope my problem isn't the motor but if it is, this video already helps alot!

[@jeffhart3114]

Would my 2008 hhr be similar?

[@rosegraves6278]

Thanks for the vidio it helped, but the fan still does not work after i replaced the fan and resister. Got any advice that could be helpful?

[@dragnardrake8633]

If you've already checked the fuses I Suggest looking at the control unit. This will likely get to you far too late. But I'm just about to replace my own motor, But I was smart enough to plug it in and test to see if that was the issue before driving out of the auto parts store. I also find it funny that auto zone says to cut it out, and the replacement motor comes with a metal ring and screws to hold it in place. I miss the days when parts in cars were easy to get to and replace.

[@mattg3708]

They come out really easy nice video the one I had to take out I just hit it with a hammer 🔨 😆 and put the new one in from a junk yard I took out with some bigger washers in out side screw holes works grate better then changing the hole vac you you have a link for the new fan ? I check Walmart for attwood 7200 with no results never know when I might have to do it again cause all hhrs and Cobalts are like this

[@LOUDsigh]

average cost? parts&labor plz autozone site says $90 but shop originally said 75. but a total of $300 total cost)

[@robertsles8277]

Cooling fan

[@olafschoepper2604]

i came here to find a way to fix mine cause it makes that uncomfortable noise on level1, just like the one, after you "fixed" it 😂

[@russhfilms682]

😂 fan was still loud but good job

[@lordflick895]

Sounds like it's hitting the screws.

[@CodytheCarGuy]

More like a leaf i pulled leaves out of there

[@lordflick895]

Cody the Car Guy that does make more sense now that you mention it.

[@daveh8316]

shit and all i wanted to see is hot the plug comes out wtf just to see if another fan works

[@edfleming6235]

Soooo. I changed one today and you are no guy guy my friend. You don’t silicon the new one back up there. You cut out the original one and replacement one has a flange with screw holes. This guy will fuck your shit up I promise you that. He fucked this one up

[@luisvilla799]

Unfortunately u have to cut it out piece of shit is trash some of the newer blower moters come with the ring if not you have to buy a ring along with the blower motor

[@jaydee506]

HHR is the worse car I have ever purchased, they make everything difficult to get to....method behind their madness $$$$$$$$$$$$$

[@TheGreatWhiteHope-pb3qr]

That's every car now !