I like the style of video. It feels like she is a student learning from a teacher, and applying the knowledge as it’s being learned. Quality video guys!
@WeRiide4 жыл бұрын
Thank you!!
@henny_pab33512 жыл бұрын
amazing video i slammed my 08 civic on some ebay coil overs and couldn’t be more satisfied took a a couple hours but with the right tools really good reference video
@WeRiide2 жыл бұрын
Awesome! Thanks for watching!!
@cvpifanatic5 жыл бұрын
Y'all should have installed a strut tower brace at the same time. I installed one on my 2012 and it was a lot of work to get all that stuff off. Now with the strut tower brace, my car corners so much better.
@dennisa65954 жыл бұрын
Great video. I’m installing some coilovers on my 08 civic and I came across some trouble with removing the 2 bolts holding the rotor camber. They seemed to be seized in there. Might have loctite by factory? Not sure. Any suggestions?
@WeRiide4 жыл бұрын
Have you tried PB Blaster and letting it sit there for 15 minutes soaking?
@whenwhathuh3 жыл бұрын
I live in Utah too! But we are definitely driving on different roads, cause I'm raising mine!
@WeRiide3 жыл бұрын
Yeah the roads here are terrible!! Sacrifice for that low life stance!
@mattij3814 Жыл бұрын
4 years later, but I have a question. Would it be easier to just take the top hat but off before you take the strut out? In my case my entire top hat will be exposed and I think this may be easier, no?
@Nesto_zip2 ай бұрын
i know this video is quite old but i was wondering if you guys used the oem bushing from the original strut? did mine yesterday messed up a couple parts one being that bushing and i’m having major clunking
@WeRiide2 ай бұрын
@@Nesto_zip yeah we didn’t think we needed it at first and had really bad clunking so we put it back in and tightened it down really tight and it seemed to get rid of the clunking 🤔
@Nesto_zip2 ай бұрын
@@WeRiidePerfect just did the same and everything worked perfect, one last question.. by chance did you guys install the front struts with the flat part on bottom? i did that and im having some clunking here in the front too
@WeRiide2 ай бұрын
@@Nesto_zip crap, I don’t remember what we did on the front 😖 sorry!
@monray12343 жыл бұрын
Do I need to do anything else if I install a coilovers on my 97 Civic Coupe if I’m running on stock wheel and tire sets. More power, Tnx.
@WeRiide3 жыл бұрын
You don't need to do anything as far as the coilovers, but if you are looking for more power then you need to start upgrading different parts of the car
@waynejardin73635 жыл бұрын
I like how he is the one whet the gloves on .... But she is the one wrenching. ..lmao ......wtf
@SanchezMotorsportsLLC3 жыл бұрын
Plot twist: She goes solo, gets a spinoff/own channel, gets more subs n views….
@OmarAguilarkiller2 жыл бұрын
Where did you guys got those headlights?? 😳
@WeRiide2 жыл бұрын
Amazon! 💪🏼
@jpalmer943 жыл бұрын
Where can I get that compresser thing you used to relieve the tension on the old coil to get the top hat off
@WeRiide3 жыл бұрын
Rented it at an AutoZone
@Dan-lx7ok5 жыл бұрын
Really cool video overall and will help a ton of people out doing this job. I just wanted to point out a few things that are worth knowing about since I didn't hear you guys mention them: - The rear control arms are solid by default (as they are on most Hondas) when you lower them you will need to get adjustable arms or otherwise your camber is always going to be out of whack and you're going to go through tires a lot faster. - Ideally with all suspension parts if you have the car jacked up you'll want a jack or something under them supporting the weight so you don't have a loaded suspension pushing down on your bolts as you're trying to remove/install them. Overall saves a lot of headache too :) Again, cool video. Subbing to see what else you guys work on :)
@WeRiide5 жыл бұрын
Awesom!! Thank you for the tips and the support!!
@elbaron513 жыл бұрын
Sure
@boomtzy_tv10932 жыл бұрын
hello im looking for a coilover as well for my civic 10th gen sport edition. is this one worth it? how's was the drive?
@WeRiide2 жыл бұрын
Drive was a lot better than expected, but still the stereotypical stiff ride. Used as a daily though and wasn’t too bad. Would definitely recommend
@fijitears Жыл бұрын
Utah checkin in! I’m taking my Skunk 2 coils off my FA5 before it goes to the junkyard.
@WeRiide Жыл бұрын
Hell yeah!!
@ynw_caz3153 жыл бұрын
What size are the 2 front nuts and bolts that connect the coilover to the rotar????? Plz I need a new one an can’t find it 😭
@matthewallwood82342 жыл бұрын
What coil overs did you put on the civic and how low did you drop it? How many inches between wheel and fender?
@AchillesRayven3 жыл бұрын
Do you happen to remember the brand of coilovers these are? I’m looking to do a full suspension upgrade on my Civic. Looking for some reliable parts.
@WeRiide3 жыл бұрын
These are Tein coilovers. Very affordable yet reliable!
@user-oc4so4lj9g3 жыл бұрын
That compression tool you used is sick where’d you get It at?? And price please
@WeRiide3 жыл бұрын
Rented it from Auto Zone, you can probably purchase it for $30-45?
@TrungNguyen-dg8qs2 жыл бұрын
i’m i suppose to use the old top hats from the front coilovers ?
@terrystarr47934 жыл бұрын
If the rear shock spins in place is that bad for it? idk what I did but my rear passenger side shock will not go any lower and I can't figure out why, its literally a inch higher and for some reason I cant lower it any more even tho the rear driver side, and whole front is at perfect height. I hope I didn't break something. If you have any advice please help!!!! Edit: I have a 2009 Civic with Tein Flex Z's so pretty much the same exact setup.
@WeRiide4 жыл бұрын
That is really strange! The rear spring, is that where you are adjusting the height in the rear?
@terrystarr47934 жыл бұрын
@@WeRiide I adjust it with the shock. This is my first time ever installing coilovers, I think something else is wrong tbh. I get a clunk over bumps, I also installed Godspeed adjustable camber arms which I hope aren't the issue. Possibly something is worn out like a bushing, or something. Going to find out this Friday I have to just take it in to a shop and see whats up.
@Itchintogodeerhuntin5 жыл бұрын
What’s the part numbers for those Teins? Nice vid
@McDzy5 жыл бұрын
Any updates? Also can you make a short vid showing how to adjust the height? thanks!!
@carlwico74234 жыл бұрын
does all of the rear coil overs springs must have lock ring on the top instead of bottom i had mine putin wrong.
@WeRiide4 жыл бұрын
Not sure exactly, it would probably depend on the company and the model of coilovers you buy 🤔
@travis43085 жыл бұрын
Great vid. Something about the 4 door makes the body look so off and not flow.
@percyochosa36783 жыл бұрын
hi! what size are your tires and rims? great looking civic!
@WeRiide3 жыл бұрын
We actually sold the Civic and don't have the sizes anymore :( Sorry!!
@Rafaellasvegas4 жыл бұрын
Thank you guys! I want coilovers but am looking at which to buy. You mentioned it wasn’t slammed but could you have gotten even more Low ? Or was that the max? Great vid
@WeRiide4 жыл бұрын
Its Rafael it definitely had more room to go, we messed with it a little and got the tires to tuck under the fender slightly 😃
@Rafaellasvegas4 жыл бұрын
We Riide way cool, thanks for the info.
@slitherman78834 жыл бұрын
@@WeRiide how is the front height adjusted without touching preload
@JohnnyTY6 жыл бұрын
Awesome job Amanda...those rims looks nice
@WeRiide6 жыл бұрын
Johnny Yang thank you!! ☺️
@huyduong57164 жыл бұрын
Wow. I wish my wive would work with me on fixing or replacing parts for our cars too. It’s nice to see female work on vehicles 👍
@WeRiide4 жыл бұрын
Huy Duong we try to do everything together!! ☺️
@akeil76033 жыл бұрын
Where’d you get the headlights? And are they still working for you now?
@chrisjgolf27324 жыл бұрын
Nice video, don't know why you didn't raise the wipers.
@inoskex77253 жыл бұрын
what is the website that you got these coilovers from
@WeRiide3 жыл бұрын
We got them directly from Tein
@BOSS974 жыл бұрын
Did you guys have to install a camber kit in the rear to counteract any added negative camber?
@WeRiide4 жыл бұрын
No, it worked out on its own!
@MannyDelReal5 жыл бұрын
Where did u get those spring compress? I’m looking to buy one
@WeRiide5 жыл бұрын
We just rented them at AutoZone :)
@MannyDelReal5 жыл бұрын
We Riide I see I just order one 😂
@WeRiide5 жыл бұрын
Manny Del Real which ones did you get?
@MannyDelReal5 жыл бұрын
Well it’s for a Honda Fit lol but I figured it out I went with the old street basis where I could send them in to get fixed if they ever break
@mannY178085 жыл бұрын
Hows the ride on those coilovers? Is those the advanced z or basis?
@WeRiide5 жыл бұрын
They are the basis. Ride is a little stiff but not as bad as we were expecting :)
@Andres-sg9yc4 жыл бұрын
How much did you guys end up lowering it by? 1 to 2-ish inches?
@WeRiide4 жыл бұрын
Andres yeah it was probably 1.25”, this is our daily driver so we didn’t want it too low for the Utah roads. They are so shitty!
@Andres-sg9yc4 жыл бұрын
@@WeRiide roads are also shitty in CO, I know how it is lmao
@khadenherrick6 ай бұрын
How many inches did you lower it
@WeRiide5 ай бұрын
@@khadenherrick not sure what the total drop ended up being. We bolted it up and only had to go down about 5/8” more 🤌🏼
@khadenherrick5 ай бұрын
@WeRiide I'm on day 3 of the install my shock bolt is stuck in my control arm and I have to get a whole new A arm lol
@WeRiide5 ай бұрын
@@khadenherrick gotta love all the crap you run into with cars 🤣
@khadenherrick5 ай бұрын
@@WeRiide yup 🥲
@lexmichael20406 жыл бұрын
hello, just a question guys I already input my basis Z coilover but my ride was so hard and so shaky and everytime I hit a dip it bounce hard, any opinion that will help me to know whats going on and where did I go wrong?
@WeRiide6 жыл бұрын
saintballadeer milkovich is the noise coming from both front and rear? Or just rear? We had a lot of “clunking” and “banging” from the rear when we would hit bumps, but did a quick fix
@lexmichael20406 жыл бұрын
We Riide mine only happen on the left front every time I press the break but most of the issue are hard bounce and thats the thing hard to figure out whats up.
@WeRiide6 жыл бұрын
saintballadeer milkovich and you re used the stock top hats right?
@lexmichael20406 жыл бұрын
We Riide yeah I did, the clanking sound are like from spring it self, there was a moment that when I hit the break its clanking but there comes a time that its not so hard to figure out whats wrong, sorry to keep asking you its just only you have the same car with me thats why.
@DriveSlow5 жыл бұрын
@@WeRiide what was the quick fix?
@epixavenger83 жыл бұрын
Where’d you get those headlights?
@WeRiide3 жыл бұрын
Found them on Amazon!! :)
@McDzy5 жыл бұрын
Was the rear installed correctly? I don’t think they were... thanks Just wondering
@WeRiide5 жыл бұрын
Michael Diaz possibly, what did you notice we did wrong? 😳
@McDzy5 жыл бұрын
@@WeRiide i rewatched it. i thought it looked wrong... but now it make more sense.. i think its good. my logic was off haha!
@christjesus29772 жыл бұрын
What dewalt is that?
@lexmichael20406 жыл бұрын
thank you so much you guys did this video I’ve been looking for this Video cause have a same car.
@WeRiide6 жыл бұрын
saintballadeer milkovich sweet!! Hopefully it was somewhat helpful haha!!
@lexmichael20406 жыл бұрын
damn, Ithink I ordered a wrong one for my 2014 honda civic Lx sedan T-T
@lexmichael20406 жыл бұрын
We Riide it does helpful actually, anyway hello with you guys here from cali.
@WeRiide6 жыл бұрын
What part number did you end up ordering??
@productivejayvlogs28074 жыл бұрын
Great video. I recently bought a 07 Si, so this helped with getting myself familiarized with the process. Be sure to watch my video!
@WeRiide4 жыл бұрын
DeterminedFlaco Vlogs that’s awesome! We had an 06 Sti! They are sooo much fun! We will keep an eye out for your vids!
@millermatic1406 жыл бұрын
Have you guys had a slight vibration after installing the coilovers? Some say the cv axles may the issue?
@Proj3ctLife2 жыл бұрын
did you grease the bolts?
@purpleskunk31246 жыл бұрын
Sml nice video, seem more and more like your turning your daily into a project car, Next video racing harnesses🏎
@WeRiide6 жыл бұрын
Ti-jean Hepburn lol you better believe it!! After racing harness is the turbo kit!!
@jritefrom565 жыл бұрын
What size impact gun is the dewalt that you guys used ?
@isralite985 жыл бұрын
Can this work for a “2012 Honda Civic-LX model”? Sedan
@WeRiide5 жыл бұрын
isralite98 the steps are going to be very similar but there may be some differences due to the age difference in the cars
@soup.p3 жыл бұрын
Nice! 😃👍🏻 I like to learn how to fix my own car,. I’ve tried by watching YT videos, little mods here and there, nothing major, yet...lol. 😆 Btw, what nationality is Amanda?
@WeRiide3 жыл бұрын
Keep watching more videos! All the research helps! She is Vietnamese! :)
@soup.p3 жыл бұрын
@@WeRiide nice! And thank you 😊 I definitely will do!
@JohnnyTY5 жыл бұрын
Look niceee...i used to own a 07 si rally red coupe but total lost to an accident not my fault thoe...
@WeRiide5 жыл бұрын
Oh no!! Always hate losing a good car!
@JohnnyTY5 жыл бұрын
@@WeRiide thanks..yea its sad
@KancelKulturePodcast3 жыл бұрын
Life Saver! First time changing them
@lexmichael20406 жыл бұрын
just a question guys what parts numbers of you coilover kit set?
@WeRiide6 жыл бұрын
saintballadeer milkovich GSB14-9UAS2
@lexmichael20406 жыл бұрын
GSHC0-8UAS2 thats my part number but really looks the same with you btw my car is 2014 honda civic Lx wish I get the same civic like yours but its what it is lol. and Im about to install mine by next week hopefully it fits as the the dealer said it is lol
@WeRiide6 жыл бұрын
oh yeah, it shows on Tein's website that GSHC0-8UAS2 fits the 2014-2016 Civic as well :) you should be good to go
@lexmichael20406 жыл бұрын
We Riide wwooohhhh, nice to know, thank you for letting me know I’ve been worrying cause Im trying to look for same parts as your but I end up getting the one that I have rn, appreciate the response man.
@MustangBullitt-sz8tg4 жыл бұрын
greatly appreciated the video, youre right on with the information as well. well made.
@WeRiide4 жыл бұрын
Mustang Bullitt2873 thank you!!!
@juliomiranda68014 жыл бұрын
anyone know if these coils would fit 08 civic hybrid?
@juliomiranda68014 жыл бұрын
@hilary marcelo thank you so much! gonna have to pull the trigger for the commuter.
@kevinalexanderosorio39974 жыл бұрын
link from where you got them please i want them so bad
@coraline0_0366 жыл бұрын
Love the video!!! Keep up the great work!!!!
@WeRiide6 жыл бұрын
Coraline0_0 thank you!!!
@michaelfulmer53286 жыл бұрын
Oh man now coilovers and wheels lol yall my heroes
@WeRiide6 жыл бұрын
lol
@oclaothug694 жыл бұрын
You guys did a very good job on the install video 👍
@WeRiide4 жыл бұрын
I Play 2 Win Truth Seeker thank you thank you!! 🙏🏻🙏🏻
@karolkowalczyk24763 жыл бұрын
I'm happy for you guys .nice couple I wish to be like this with my wife congrats
@gRosh082 жыл бұрын
Good stuff. Thanks for sharing.
@Danny-he9jd2 жыл бұрын
What rims are those!!
@josevega70584 жыл бұрын
So the back side of my strut comes up in the trunk, any ideas how to solve?
@anthonyarteaga28013 жыл бұрын
What coil overs are those??
@WeRiide3 жыл бұрын
Tein Basics!
@TumultGorilla4 жыл бұрын
Your video was very enjoyable. I like the way you filmed, and narrated Your girl is FINE!!!
@WeRiide4 жыл бұрын
Thank you!!
@Sskreechy2 жыл бұрын
I have a 9th gen civic si but this video helps!!
@maximilianignacio2998 Жыл бұрын
Great video. It really helps.
@Trabaskuy6 жыл бұрын
What do you use cordless driver detail?
@bradfromthewell2 жыл бұрын
Clever thumbnail.
@kimm67483 жыл бұрын
what type of rims are those ?
@earlyculyer41034 жыл бұрын
Where'd you get the parts
@WeRiide4 жыл бұрын
We have a wholesale account with Tein so we got it from our own supplier, but there are plenty of reputable companies that sell Tein :)
@andrewmartinez50134 жыл бұрын
They live in Utah? I wonder where. They could just install my coilovers
@WeRiide4 жыл бұрын
We are in the Salt Lake Valley ;)
@blackdragon53103 жыл бұрын
How long does it takes to install a coilovers ?
@WeRiide3 жыл бұрын
Not too bad, just depends how many tools you have at your disposal. Could have just taken around an hour
@fuckbeingbroke24 жыл бұрын
Honda For Life 😈 with the nails on
@andyly66516 жыл бұрын
Great video! If your lazy like me, i would used the jack to jack up the front hub as well, instead of lifting it b hand haha 😂
@WeRiide6 жыл бұрын
Andy Ly lmao! That would have made things a little easier 😂
@andyly66516 жыл бұрын
We Riide make the tools work for you, not the way around. 😂👍
@SilverLightningXV2 жыл бұрын
I came for the dog, hi doggie nah nah but anyway, lmao I'd love a Civic ngl I'm in the process of getting my hands on an accord tho so I'm being patient until I can get what I'd like to be in soon enough
@Videspro6 жыл бұрын
Nice work well explained
@robertorodriguez7629 Жыл бұрын
how much?
@luisakabigluu69595 жыл бұрын
Really good video!!😇
@tou34475 жыл бұрын
great work
@WeRiide5 жыл бұрын
Thank you! :)
@GoldSK963 жыл бұрын
Thanks
@FuhQDanny6 жыл бұрын
Super useful thanks!!
@WeRiide6 жыл бұрын
No problem!! Thanks for watching!
@haynlaskan96684 жыл бұрын
Whats your tribals mean
@WeRiide4 жыл бұрын
Depends which ones you are talking about. I have my entire left leg done and my entire right arm and chest. The short of it is they are all about my family. Different parts of the tribal have different meaning and represent different members of my family :)
@eljaythao25725 жыл бұрын
Part number?
@djinlop1076 жыл бұрын
Hi...from Cali
@WeRiide6 жыл бұрын
Djin Lop hello!!! We wish we were in Cali right now!! Lol
@zjedinite4 жыл бұрын
Talk about a bad ass, not you dude! 😂 lucky dog...
@WeRiide4 жыл бұрын
larry zepol 😂😂😂
@truben90616 жыл бұрын
Size of the Allen key?
@WeRiide6 жыл бұрын
Sorry Ruben, we don't remember which size it ended up being :(
@truben90616 жыл бұрын
No problemo, Job finished
@zachward1846 жыл бұрын
Love it!!!
@MyIronman85 жыл бұрын
he did lower it because their not hight anjustable
@ghostpimp4 жыл бұрын
those are lowering springs
@hulkkhogan93775 жыл бұрын
Wife is hot as hell bro..
@nothanks55204 жыл бұрын
Have some class brother!
@Max_ellis743 жыл бұрын
1:59 That’s what she said
@brn3k8125 жыл бұрын
if you add it up this guy is rich as fuck
@amerassiriy78425 жыл бұрын
Super pretty girl 🥰🔥
@WeRiide5 жыл бұрын
Amer Assiriy thank you! ☺️☺️
@StuartRothon5 жыл бұрын
How dose she do that with those nails 😱
@WeRiide5 жыл бұрын
Stuart Rothon It’s not an easy task 😪 But the nails had to come off for the 240! Lol
@fayehowle98944 жыл бұрын
Nothing sexier than a smoking hot tatted Asian girl working on a car!
@jameslapine6786 жыл бұрын
Sell it and buy an Si
@WeRiide6 жыл бұрын
James Lapine we have an all wheel drive V8 in our sites to replace it ;)
@bungholio47473 жыл бұрын
Why the gloves? You dont want to get your hands dirty?? Lol
@WeRiide3 жыл бұрын
Exactly, all these years of dirty hands and tons of scrubbing at the sink. So we tried something different. Problem is, it feels too weird having them on haha! So that was the one time and last time that we tried using gloves haha!
@QuantikoOfficial10 ай бұрын
it’s “TEE-IN” NOT “TYNE”
@WeRiide10 ай бұрын
Thank you thank you! 💪🏼💪🏼
@QuantikoOfficial10 ай бұрын
@@WeRiide haha ur welcome! i got racelands instead 😅
@decaygrim89434 жыл бұрын
You guys got the cheap gay tein basis shit lol
@WeRiide4 жыл бұрын
DeCay Grim yep! Didn’t really feel like dropping $2k on a car that’s worth $3k 🤔
@decaygrim89434 жыл бұрын
The flex z only costs a little more
@henryh27936 жыл бұрын
Love the video.First
@WeRiide6 жыл бұрын
Henry Phan thank you!! Lol
@santiagom75766 жыл бұрын
🤗🤗 2 Krazy Kool Sexy people, Amanda don't ruin those beautiful hands, hey brother I think she had everything to do with you getting the Beard cut... 😁 Women always get their way. Awesome Channel
@WeRiide6 жыл бұрын
Santiago M haha thank you!! No it was a mutual decision, we both wanted to see if we liked it better without the beard 😃 it has been a while since we have seen my face lol