Coleman CT100U Cheap Amazon Exhaust Unboxing / Installation / Ride Along

Unboxing and Installing the AR Sport exhaust for the Coleman CT100U. This exhaust is only $29.99 on Amazon and sounds / looks awesome! Check it out

[@rachalhollier5679]

Arsports has top shelf quality part’s and they back it up in reasonable time. American made!!!!

[@theoldfartschannel3692]

I'd like to offer some unsolicited advice. The bearings in those Coleman minibikes come with inadequate grease in them. I advise carefully popping the seal out, adding grease, and reinstallation of the seal. Also check every nut, bolt and screw on it for looseness. A silicone heat sleeve and cheap Chinesium exhaust shield from eBay will prevent burned legs.

[@ScottieFindsFish]

i really appreciate that! you gave me a project for this weekend

[@luisLopez-ig3nv]

I have to exact same bike pls keep making videos

[@ScottieFindsFish]

i plan to upload some videos soon to this channel, a mixture of mini bike and fishing content. maybe some offroading in my tacoma. hope you stay tuned and enjoy!

[@seventythreex2513]

Dope gotta get myself one.

[@heathenprojects2639]

I'm in the middle of modifying one of these motors for my mm80 I'll be doing a stage 2 kit from a predator 79cc and removing the governor internally I sub to keep up with your progress

[@ScottieFindsFish]

that sounds awesome! would love to see it when its finished thank you for the sub

[@loki48209]

Sounds dope for sure! I'm doing something close to that myself, only difference is my engine came off a doodlebug

[@henryfigz808]

I just got one today I love it and it carry me like nothing a im 230 pounds lol

[@hillbillytennesee7438]

I got a ct100u for my grandson less than one year ago. The exhaust on his little bike has a rubber tube running back under the valve cover to what I believe to be a evaporation re-burning system. (maybe I got the California version)The one you are showing has that silver spark suppressor on it. Question is, what should I do with that hose? Weld a nipple on my brand new stainless steel header pipe?.

[@Deucealive75]

Most everyone that does performance add on parts eventually remove the EPA parts. Some of these engines come with a vent from the tank to a small charcoal box that holds fuel vapor and gets burned when the engine starts. Those parts get discarded when the stock air box is removed to install an air filter kit. What they end up with is an engine that vents both fuel vapor and crankcase blow by into the atmosphere. Even if you did weld a nipple onto the header pipe the system wouldn't work the same as it did with the stock muffler. The device on his muffler is an air valve that adds air to the exhaust. My guess is that there's something to adding shots of cool air into the exhaust pulses.

[@howhesmart9133]

hey get some heat exhasut tape for it too

[@sawyerdowell7316]

I’m 135lbs and 5’6 and I am thinking of buying one is it a good bike to have some fun on

[@ScottieFindsFish]

yes this bike is super fun to rip around town and hit some trails. cut that throttle stop bolt and itll fly

[@dawaskisanders8275]

hey men I just want to know what oli do u use of the Minibike Because I’m going to get one

[@ScottieFindsFish]

i used 10w30

[@VdoeBrina]

Was thinking about buying one do think this bike can hold me bc I’m 125 pounds I think it’s okay to get

[@ScottieFindsFish]

yes i love it! im about 150 lbs and it carries me around no problem id say this bike is perfect for you. stay safe and have fun!

[@loki48209]

@@ScottieFindsFish completely agree! Buy it pre assembled if possible.

[@rovertv7902]

I was thinking of getting a 100U... I'm surprised at how good it accelerates! Sorry to get personal but may I ask your weight? Im 215lbs, I'm just worried it won't carry me?

[@ScottieFindsFish]

no worries man! im 150 lbs but iv had friends who weigh 200+ ride it. id be more concerned about height i am 6’ tall and my knees are reallly close to the handlebars. overall great bike i use it to go around town and fish the ponds

[@boxveryt]

i would get a ct200u or a ct200u ex

[@robnduhcut]

Get a 100 swap it out wit a predator you’ll be set at 215

[@jettb2931]

I'm 245 just got my coleman working everything stock and it picks up good with me on it, planning on doing throttle stop and governor deletion

[@sudufuddjfjfjdhsgxv2328]

How fast does it go I am thinking about getting one

[@ScottieFindsFish]

30 mph with the throttle stopper removed

[@imsraxyt8122]

Would this exhaust work for the cc100x??

[@ScottieFindsFish]

id guess yes but i am not sure

[@imsraxyt8122]

@@ScottieFindsFish U found one already for the cc100x 👍

[@tjromero11]

What’s the top speed on that?

[@ScottieFindsFish]

with the governor it only does 18 but when i cut that governor off it does 30mph

[@paytonlogan3890]

Do you need to rejet the carb at all

[@ScottieFindsFish]

i didnt have to

[@paytonlogan3890]

@@ScottieFindsFish okay. And it still runs fine if you are still using it today, right? I just wanna make sure cuz I just got it back from the shop from issues when I bought it

[@ScottieFindsFish]

@@paytonlogan3890 yup still runs great i take it on trails and just around my neighborhood pretty often. still haven’t messed with the carb or anything since this video

[@mojostudio]

Vertical video.... Dude.. Use your brain...

[@ScottieFindsFish]

first youtube vid i made.. everyone else seems to like it way more than any video you have posted..

[@ScottieFindsFish]

keep on posting those 30 second gaming clips and drive thru POV’s that get 7 views… yeah im really gonna take advice from you

[@cristiancruz1972]

No need to be rude. Sheesh

[@ScottieFindsFish]

@@cristiancruz1972 im the rude one?

[@cristiancruz1972]

@@ScottieFindsFish nah. The dude crying about the orientation. You good

[@jetwolf8136]

My man's got scammed it's 10 to 20 bucks on eBay

[@ScottieFindsFish]

damn bro if $10 extra is a huge scam to you thats rough hope it gets better frfr