Colt's New 44 Magnum Kodiak

[@philiplott4920]

CZ is doing a great job on the Colt revolvers!

[@LIONTAMER3D]

Cz always does a great job @ everything

[@cgoofies]

The Kodiak is a beauty. Thanks.

[@Graver81-69]

I’m in love. I’ve found my next wheel gun. I’m glad you made this video because I was unaware of this one, so thank you sir!

[@jeffreylocke8808]

The new Anaconda cylinder and Kodiak cylinder is longer and handles the Garrett Cartridges of Texas +P 330 grain Hammer Head cast lead gas check load as well as the Buffalo Bore +P+ 340 grain hard cast gas check loads.

[@christofonobrown3659]

Nice!

[@876mpr]

Definite improvement. Kind of pointless if it wouldn’t accept cartridges up to 1.720” or so.

[@TheTAEclub]

Since which year 2021?

[@nat718]

That's good info.. the only revolver that has that capability was the Ruger Super red hawk wish I didn't get rid of mine.

[@DB-sd3cw]

Why do older fudds always type run on sentences with zero punctuation? So fascinating.

[@mikeogden5256]

It’s more fun watching You and the Gun than the target

[@JustinOpinionChannel]

I appreciate the feedback. I often feel like people get way tired of looking at me, so I try to mix it up. But I can certainly see your point. I usually try to keep the target in a small window.

[@richardmarkklimok]

Thanks!

[@JustinOpinionChannel]

Thank YOU - you rock!

[@ronsmith7342]

I had the first gen Colt Kodiak back in 1995 a 6 inch non fluted cylinder but they were Magna ported. loved it

[@TheTAEclub]

Magna port is better? Wonder why colt didn't go with that since they are still around

[@saltyguerrilla]

My Grandfather and I bought one each also. Those things were really great shooters. Like a complete idiot I so.d mine and my inherited my Grandfather’s.

[@lizzardwizard2000]

@@TheTAEclub More expensive.

[@Hammond12331]

I'm thinking they did it this time in house, more than likely​@@TheTAEclub

[@totljag1]

This is the next firearm I purchase

[@EdwardGresko-bo6yk]

Send me a photograph of 30060 review of the firearm pistol please

[@Kevin-s7s]

Its limited. Better get er. Me too. I want it

[@TheTAEclub]

​@Kevin-s7s is it i only they made only 2k of original kodiak but they are going to stop making these? What about the Talo exclusive with wooden grips? Limited too?

[@Kevin-s7s]

@ i know nothing. Just one review said limited run

[@TheTAEclub]

@Kevin-s7s prob the original production which were limited how Olds the video

[@MTMILITIAMAN7.62]

By group size alone, that Hornady Custom load shot lights out. I've always had really consistent terminal performance on game from the XTP as well. The 4.25 inch .44 is a good all-around choice for the woods and the hoods, if you have a good holster. This model could be a contender for a one revolver to rule them all, from the bedstand to the trail. Smooth shooting, reliable, and versatile, with class and an added level of potency for those of us who abide by the philosophy of FAFO.

[@troytaylor9228]

S&W made for a time the Mountain Gun in 44 mag and 45 Long Colt. I had both. These were 4" stainless models with tapered barrels. This Colt reminds me of those old 90s Mt guns. I wish I could say I have had better luck with Colt than I have. The Officers ACP I got rid of because you could not trust the safety. Then I had a 38 Colt reovolver which I loved to look at but it was one with a faulty lock up so it became a general pain. Then I got that King Cobra and that is nice. I have to admit I like that one. I'll definitely be checking these Kodiaks out in Tulsa next time to town though thanks! I found a whole bunch of 44 spcl. and 44 mag ammo the other day looking for 410 ammo and I don't even have a 44 anymore so this was perfect timing!

[@unsigned1138]

My Dad has one of those .44 Mag Smith Mountain Guns. I've got a a 'Mountain light' - .44 Spcl on a scandium frame, 3-1/8" barrel. Love the unflawed cylinder on this one.

[@danielreid3476]

I haven't seen a new revolver I liked in years, but honestly this one intrigues me! Very nice review!

[@TimDavis-wc7rc]

Well, I'll be getting one. Thanks for sharing

[@justicehockey]

Thanks for the straightforward analysis

[@christofonobrown3659]

Also got a Kodiak, and the trigger is much nicer than my Anacondas. Love it.

[@JustinOpinionChannel]

I expected it to be "good" - but was pleased to find it "excellent"!

[@moman3334]

It IS an Anaconda variant.

[@christofonobrown3659]

@@moman3334 yes it is, but it is like the Kodiak came with extra polishing or something. Crazy smooth compared to my Anacondas.

[@moman3334]

@@christofonobrown3659 - Are your "other" Anacondas the original series or the new design? I have 4 of the recent design and the actions are all the same. Other than the finish, the non-fluted cylinder, the roll mark Kodiak and the magna-porting I have not seen any difference. I do have one of the older Anacondas and it is very different. (And not in a good way.)

[@christofonobrown3659]

@ I have the 4.25 and 6” new design. Was looking to pickup the 8” and saw the Kodiak. On the Kodiak I purchased the trigger was obviously nicer than the 8” (also new and unfired just like the Kodiak) and when I brought the Kodiak home it was also nicer than my Anacondas (each under 1000 rounds). Maybe through manufacturing tolerances my Kodiak ended up in a sweet place?

[@z06cowboy72]

Disagree. This revolver, and all in this category, were originally designed to be go anywhere, do anything field pieces. Capable of any field task for an outdoorsman, easy to carry in a cartridge both capable and versatile beyond most. The inventor of the 44 magnum cartridge did not envision it a dangerous game cartridge and carried a 4" M29 on his ranch for everyday use from pests, to hunting, foraging, and protection. This revolver will excel in the same role today.

[@ironmikehallowween]

Mouse to Moose

[@charliestoybox2099]

Elmer Keith

[@lisabibby6274]

​@@ironmikehallowweenI like that saying and I would imagine that the 44 mag would be great for anything,from 2 to 4 legged.

[@garymatney9344]

Great video! Thanks!

[@RevolverTv]

Yes the one that i have is all i ever wanted in a revolver and then some. This is a great representation of the kodiac in my personal opinion.

[@ddelacruz]

Great point about being a wildlife photographer. Honestly never even thought about that. Now I want two. 🤣👍🏼👍🏼

[@justinmourad9962]

I have both the Kodiak and the Grizzly and love both of them!

[@jelmo1057]

Holding a 9# gun and taking 200 rounds of punishment to your hands, shoulders and back, Wow, you’re a tough man Justin O! Well done review, much appreciated.

[@TheFrogfeeder]

48.5 ounces is right about 3 lbs

[@mikeogden5256]

Paul said His first line of defense in home protection is the 44 Mag

[@DB-sd3cw]

Dang what a goober

[@tonnywildweasel8138]

Well .. I'll probably end up buying it as usual :-) Thanks for the review 👍

[@normanmallory2055]

So far I like what I see from this revolver , I too carry my .44 mag with me when I’m out there in the field ! I’ve fired a lot of Colts over the years and liked the accuracy and function of the firearm!

[@EdwardGresko-bo6yk]

Send me a picture of the 44❤

[@henrymorgan3982]

Nice. Some low light slo mo would be pretty cool! Great video!

[@daxmonster3429]

A chronograph might be a good addition. Thanks for the video.

[@JustinOpinionChannel]

Then it becomes a video about ammo. I'm not testing the ammo, and I'm fine accepting the published velocities.

[@daxmonster3429]

@JustinOpinionChannel I understand. I'm just always curious about velocity and barrel lengths.

[@JustinOpinionChannel]

@@daxmonster3429 Yep, no worries. I sometimes use a chrono, but usually to test ammo or compare barrel lengths, etc.

[@coltinyancey6420]

Its a good idea. Take the factory stated velocities and see what the gun obtains.

[@MrTroutl]

Taurus makes a nice ported 44 mag. I've shot it several times. Very accurate but recoil is still a monster.

[@Trapshooter37]

Love mine. One more I added to the collection

[@bigoz7]

Great video very informative and thanks for sharing!

[@OldManStrength2112]

Gorgeous Revolver, and you handle the recoil well.

[@JustinOpinionChannel]

Thanks. I don't feel like I do! But when shooting heavy-recoil handguns, I try to just roll with it rather than attempt to "control" it. That seems to work best for me.

[@OldManStrength2112]

@@JustinOpinionChannel I think Ruger is probably still known for having the strongest built revolvers, (I just purchased a new .454 Alaskan) how well do these new Colts stack up for stout build quality? Thanks for any feedback.

[@filtonkingswood]

Ive always been a 'Colt for Semi automatics' 'Smith and Wesson for revolvers' guy but it was interesting to watch.

[@fear5735]

I used to be a S&W revolver guy, until I bought them. Had a 4" 629 that would have safety flag engage every third round along with cylinder lock up. A Model 10 that would only half rotate cylinder, and a 29 that the barrel unscrews as you fire it. S&W responded to 0 of my repair claims and will hang up if you call in. I will never touch another S&W in my life. Colt revolvers are the only way I'll be going from now on.

[@filtonkingswood]

@ Were they all new guns?

[@fear5735]

@@filtonkingswood Yup. Only S&W that worked was 686 plus, had a 7" barrel. Was one that went to a trade for a Colt King Cobra with a 3" barrel. Put 100 rounds dowb it the momment I got it. Flawless

[@blkshdo1]

I like my original colt made Kodiak Will never get rid of it. They are like unicorns now.

[@rogermurphey7444]

Man . Your group with the Hornady customer was great. Would you choose that ammo. For your home defense chose? And do you feel that the Kodiak musel brake really helps? Thanks for the review. Side note: I have a Ruger Alaskan 2-1/2" Barrel. 44 mag. It's really nice with similar hot loads.

[@JustinOpinionChannel]

You made my lip quiver when you said 2-1/2" barrel! I have had great results with Hornady defense loads in most calibers. To really compare them closely I'd want to rest the gun, but I agree - that group was really good. I'd have no problem keeping it loaded with those rounds! Thanks for the comment. And oh yeah - I do think the ported barrel does help. I have a S&W 44 mag with compensator, and need to do a comparison.

[@valuedhumanoid6574]

The only .44 Mag I have is the Ruger Redhawk that is in polished SS and with a 4" barrel (I think it's actually 4.2") with the black rubber grips. Very similar to this model of S&W. Looks almost the same now that I am holding it and looking at your video! lol I suppose the shape is slightly different. I can't imagine it feeling any different tho. I will have to see the specs of both. Nice video. You covered all the high points

[@PaternTheO]

great video and camerawork, thanks so much. Btw are you perhaps planning on making a video on the SW 460v 5inch, that would be a cool comparion to the Kodiak.

[@Gibbydogs]

Great video thank for reviewing this firearm. However I do have a question unrelated to the video. What kind of glasses are you wearing, and do the lenses make everything real dark?

[@wilfridBAUCHET]

bonjour magnifique vidéo explicative sur ce colt kodiak en calibre 44 magnum il est superbe en canon cours ainsi merci pour la qualité de votre travail et ce partage vidéo cordialement

[@frenchfrysz6695]

wow what a beautiful piece.

[@DerekJones1081962]

Wow, I love it. I wish that I could afford one!

[@In_con_ceivable]

Beautiful looking gun…that would be a piece to pass on….thank you for the video 👍🏻

[@JustinOpinionChannel]

Thanks for watching!

[@checkityhold]

.44 Special is a great defense round against 2 legged predators 😎👍

[@spiritualawakenings6251]

Uhh we watched Dirty Harry too

[@theshuz]

Bear spray is more effective against 4 legged predators than 44 spc/mag

[@yeayeasautoadventures]

@@theshuz 44 mag? really

[@BRAVO_FOUR_06-13]

​@@theshuzyou should carry both. Look up "Efficacy of Bear Deterrent Spray in Alaska". It's an interesting study and an interesting read. Spray is about 92% effective by the numbers, so there is a real discussion to be had about which is more effective. The real deciding factor would be individual proficiency with both spray and firearms. Standing at 7 yards and shooting a static paper target twice a year isn't training. But now I'm rambling on. My point would be this: carry BOTH and become proficient with BOTH.

[@ewhyte8059]

Don’t forget the big blade knife and the trigger guard lanyard. Because terrain differs on the move and weather conditions can change quickly. missteps and stumbles can have unexpected results. this is why it’s prudent to have some experience of discharging a firearm while lying on your back because natural predators won’t be giving you time to get back on your feet!

[@ammohead73]

I still own my Anaconda that I bought in 1994 for $450 New. I looked at the Kodiak the other day and its a very nice wheel gun, Cz is doing a great job with Colt these days. The price of the Kodiak is a little higher than my Anaconda was lol.

[@kensantiago132]

Thank you.

[@JustinOpinionChannel]

You're welcome!

[@claiborneeastjr4129]

Nice. I especially like the porting and the unfluted cylinder.

[@nibotkram7743]

I have the Ruger Alaskan in 44 mag and it’s been a sweet wheel gun. I want to check out the Kodiak when my gun shop gets one in.

[@ajac45]

Justin, great job on the Colt Kodiak review. Really appreciate the effort you put into shooting 200 rounds of .44 Magnum and sharing your thoughts. That’s a lot of heavy recoil for one day, and your honest take on how it affects the wrists is exactly the kind of insight people need. If I’m choosing a carry gun for hiking in bear country, though, I’d personally go with the Ruger Alaskan-either the .44 Magnum or even better, the .454 Casull. The shorter 2.5-inch barrel makes it much more practical to carry on the hip without sacrificing the firepower needed for big predators. Thanks again for the detailed review: it’s content like this that keeps us all informed.

[@hauk65000]

Good review. But what is the distance to the target ?

[@Kelly-oq9nh]

Crappy lighting this time of year ? In Seattle… what’s light look like ? Thanks for the review

[@thetraveler5798]

Like it a lot, but I think I would like to see a 6" one also, however gret looking revolver 'Colt' 👍🇺🇲‼️

[@bernardbianconi7486]

Très belle Arme super présentation merci

[@larkinoo]

Lower the rear sight.......don't settle for such a high shot placement. I don't know why but most revolvers come with the rear sight ( if adjustable ) set very high. Lower the damn thing, don't be afraid. Lower the sight, lower the sight, lower the sight. Anyway, I am intrigued by these new offerings from Colt.

[@foxsquirrel3038]

He did.

[@pablosuarez4592]

Ummm.....like.....did you mean "lower the sight", or "LOWER THE SIGHT"???😂

[@larkinoo]

@@pablosuarez4592 I don't know now, I get really cornfused when someone who is much smarter than me, aks me complicated questions like that.

[@jimchambers7548]

Now that's a nice revolver👍

[@dansteel9873]

I had one of those 25 years ago so not new. I only paid $500 for it from my favorite gun store in Henderson Nevada

[@samhill3496]

LGS has a couple one for me. Nice piece. Heavy duty

[@lizzapaolia959]

Thanks for sharing your review. 😎🙏

[@vinnydrew6263]

I picked up an 8inch barrel anaconda. One of the best pistols i own. The fit, finish and feel are insane. I do like the porting on the kodiak, might send my anaconda to magna port to be ported.

[@BIGCHIVES4]

Truly amazing thank you 🙌🏾👏🏾💯💯🎯🎯

[@Maelstrom8]

Great video and cool gun! Having fired a number of 44 magnum revolvers, did the porting make a noticeable difference to you?

[@h.r.puffnstuff8705]

Mag ported 3” m629 vs 4” m29? The mag ported 629 def behaves better under recoil. The style of porting colt is using here is somewhat more efficient. Is there enough to tell a difference between the Colt porting vs Magnaport style. Maybe but I have my doubts.

[@tonytiger8451]

It's a Harry Callahan revolver, for sure! AKA "Dirty Harry" go ahead make my day! Nice looking hand cannon!

[@timmytwodogs]

Sweet looking revolver.

[@kimwarfield1587]

I'm afraid for my back to take it, I would need to do something about those tiny ports. They can be enlarged and increased to really soften all that recoil. It really has a minor effect on velocity, and muzzle flip is eliminated.

[@dhooter]

Those ports don’t seem to do a damn thing lol

[@smithn.wesson495]

Watch a video of a 2021 Anaconda with an unported, solid 4.25" barrel and the new Kodiak. You will see the difference and reduction in flip up and recoil. Yes, in a perfect world a side by side of the two guns would have been neat, but most people don't have $3,000 laying around to buy two revolvers just to show the difference on a video.

[@boostamante64]

​@@smithn.wesson495From the looks of it, my magna ported 629-2e recoils less at 3in the pistol in this video. This pistol looks like it flips up twice as much.

[@ToddSpikes-n8i]

​I've got a 3" 629 Trail Boss also magnaported..also noticed that.@@boostamante64

[@wiggybends3632]

Thought those holes were to pour cleaning fluid in

[@dhooter]

@ Good for something then

[@Nobody03119]

It's on my Christmas wish list but my wife is still upset about the thermal scope I bought 6 months ago!

[@BRAVO_FOUR_06-13]

I'm guessing that 0311 in your name isn't a coincidence.

[@hd114ul7]

Have you ever compared the Kodiac with a 4.25 Anaconda to see if the porting actually makes any difference?

[@richardmarkklimok]

I’ve got the new Anaconda, great gun, smooth as glass, the rear sight is the only problem I’ve had. Had to replace it because the blade fell off somewhere. Wilson combat is a good replacement if you have a similar issue.

[@earldelsanto]

I dig that gun. I had a 8 inch anaconda back 15 20 yrs ago. Paid 525 brand new in 97.sold her for 800in 2010. I recently bought a absolutely beautiful smith and Wesson m294 inch .walnut grips. S Just the most beautiful revolver of all time. I'd like to get this Kodiak for field use dig the cylinder. Not a fan of rubber grips I find they compressed and bend under recoil. Prefere wood grips with good gloves. Also tied of the full underlug as most colts sport to neasuum. And 3rd colt is a bit two proud of all their revolvers. 20 to 35 percent cost increase over smith and Wessons fine upper tear revolvers

[@mavericknonconformist69721]

I had the Smith 329PD, 44's where brutal.

[@Alden99669]

They need to make this in 454 Casull for people that live in Alaska.

[@z06cowboy72]

Might be possible with a 5-shot cylinder. Ask Jack Huntington.

[@slingblade3048]

Idk if colts are strong enough for 454,but I'd want one too if they make it.

[@steel1911]

A Colt 454 or 480 Ruger would be like my Colt Python and Ruger Alaskan 454 had a love child 😂 Count me in I would buy that!

[@pauldvorsky1969]

Great video. Thanks

[@ZommBleed]

I wonder how much of it is MIM?

[@ix-Xafra]

I can read your heart rate pulses as you rock taking aim from Australia. Nice double-action trigger control btw...

[@myfavoritemartian1]

As much as I would love to have one, $1,500 is insane.

[@451whitworth4]

I'm actually surprised it's only $1500

[@myfavoritemartian1]

@@451whitworth4 It is because it is foreign made and imported to be only branded COLT.

[@petervoyt24]

@@451whitworth4 same here, I was expecting $2500+

[@Carriesaglock]

It’ll hold it’s value in the long run.

[@jeffselchow5719]

I got my Anaconda back in 1994, just a suggestion, when shooting with 2 hands and single action, try hammering back with your 'off-hand' this way you are not repositioning your grip every time you hammer back. I was taught this by a Camp Perry Champion back when I first got it, he was right, my accuracy improved.

[@embreeja]

Absolutely right. I have been shooting for over 50 years. The grip for a semi is totally different from a wheel gun. For the revolvers, I always wrap my left thumb behind the hammer and use it to cock the hammer. My grip never changes. As I am getting older, my grip is not what it used to be, but it still works. The 44 is my favorite gun --- I have 5 S&W's in the 44 (the latest is a Model 69 --- five shooter and lighter --- it is not as much fun to shoot as my other 29's and 629's). My only Colt wheel gun is an older Python (was my dad's --- he got it from a Hells Angel that he hired to do 'guard duty' for him in the 70's in Pasadena Ca). It is very nice and the trigger is great --- but so are the Smiths. There is absolutely no sound quite as nice as a revolver as it is being cocked single action (well, maybe a pump shotgun).....

[@mattypants1975]

I have a grizzly, I’m definitely interested in the Kodiak too

[@brianmiller1580]

Good looking wheel gun!

[@bigthey1827]

That’s a beauty, someday!

[@tomhopwoodful]

price?

[@BUZZKILLJRJR]

Awesome presentation brother I'm subscribing!!

[@JustinOpinionChannel]

Thanks! I do my best to make content that I'd watch. It's a constant journey! 🙂

[@AmericanArmed]

Colt, So creative ! When is Ford going to remake the Pinto.

[@mikedolqueist1130]

Off question but what type of sunglass are you wearing, how can you see out of them, they have textured lenses?

[@JustinOpinionChannel]

Dillon Optics. They have matte lenses - polarized. I have sensitive eyes and love them - with the extra bonus that you don't see lots of reflections of my cameras.

[@JoeInMemphis]

You seem to be experiencing the same shooting high issue I had with a new 6” anaconda, with the rear sight all the way down it was shooting 8 inches high at 25 yards. You can find oversize sight blanks online, which is what I did and I’m in the process of shaping me a new front sight that is much taller than the .180 inch sight that comes standard on the revolver. I did not want to send the revolver back because the groups are incredible, five shot three-quarter inch groups seem to be the norm for that gun, they were just insanely high.

[@gk-qs5ri]

Love it. I've got an Anaconda 6 in and sent it back to the Colt Custom Shop and asked them to port it and do a little work on the trigger. Looks like they took my input and that of many others and made this fine gun. . SENT IT BACK TO THE colt CUSTOM SHOP

[@hennies9509]

I just knew the xtp would be better. I reload them, and they are very accurate.

[@kylewood8327]

Looks pretty nice!

[@markcerajewski5709]

I just ordered mine today

[@saintsinningsword]

Like to see if there are models in 454 Casull or 460 Magnum.

[@KW86.]

Are you going to show how to clean a stainless steel revolver? Extremely difficult

[@TheTAEclub]

I wanna see this too keep it worth passing down

[@THEBEARDEDTOOLGUY]

looks like it kicks way less then my dads old model 29 and it might be big enough frame for 454 casuell

[@AlekseySh1982]

Are there rifling in the ported part of the barrel?

[@JustinOpinionChannel]

Yes

[@AlekseySh1982]

@ thanks.

[@jelmo1057]

Yes, I stand corrected.

[@leeanderson5955]

If it comes with a classy wood handle I’m interested

[@biker176]

Recently purchased a (brand new) Colt Anaconda …light primer strikes and trigger reset have been major issues (44 special and 44 mag) …it’s going back to the factory still waiting 2 days after contacting Colt for the RMA 😒

[@TheFrogfeeder]

I got the snakes, I didn’t even know there was bears!

[@anthonypushruk2586]

Questiion Justin: Would or can this handgun be moon clipped? Is it even possible or recommended?

[@spiritualawakenings6251]

If you want power the S&W 500 mag has about all you can handle. But Colt is cashing in on Ricks Colt in the walking dead.

[@arnoldosalazarjr9665]

the gun is awesome and expensive but i would love to have one

[@blakefreak]

What sunglasses are those?

[@JustinOpinionChannel]

Dillon Optics

[@kmyersupeyyp]

Colt needs to give it up.

[@cz1always608]

My next 44 will be a 6 1/2 inch as shown in testing to get the maximum velocity with 44 magnums you do need 6 1/2 inches .. so says testing on whoever wrote the article in guns and ammo a few years back.. thanks nice gun for sure 👍

[@DamienNeverwinter]

44 for kodiak bears? Underpowered is an understatement

[@mouthbreather280]

Yeah I don’t know what they were thinking, it comes off as uneducated honestly. Their “Kodiak” should have been a .500 S&W or similar class and the “Grizzly” should have been a .44.

[@michaelhodges8312]

S&W 460V CPB 395 grn. what I use

[@skidmark7845]

@@michaelhodges8312. Dam that’s a hefty round. The Steinel 350 gr’s are kicking my ass. Looks like midway USA has the cor bons for $50 a box

[@michaelhodges8312]

@@skidmark7845 It’s brutal at 33 grains H110 powder. Literal hand cannon but good for grizzly defense. Cast Performance Bullet, CPB395 Gas Check bullet.

[@spaceranger3728]

The muzzle crown looks like it has a shrouded barrel like the S&W 69.