COM24. Use Web Page to Control and Monitor Your PLC via Siemens "View Of Things" in TIA Portal V17

[@felipepaiva4798]

You're incredible man! Every time i learn a bit more with you, thanks so much again!

[@electricalautomation]

My Pleasure! Glad the videos would be helpful! Enjoy them and please forward to more friends.

[@sangarabdulrahman6140]

Siemens video back ❤❤❤❤❤ please create series about technology instructions

[@electricalautomation]

Haha, Thanks a lot! I am working on some videos showing how to use Motion Technology Object and Program to control a DC Motor with Encoder project. Those are 'REAL' motion test videos. Also I published some videos before discussing the Motion TO and Program via virtual axis. They are at the link: MS03a. Single Axis Control - Project Introduction kzbin.info/www/bejne/romWpGWteNSBo7c MS03b. TIA Portal Technology Object (TO) Configuration kzbin.info/www/bejne/rmO0pJagfNysrNE MS03c. Reset, Power, Home, and MoveJog Instructions kzbin.info/www/bejne/Z3_ZXpWXopiprMU MS03d. Move Absolute, Relative, Velocity, Stop, and Halt Instructions kzbin.info/www/bejne/fZ-Wcpijm8t7ncU MS03e. Download Axis and Program into PLCSIM, OB91 Buffer Overflow Solved kzbin.info/www/bejne/hKjdc5R6qKyjn8U MS03f. Online Axis Test via Axis Control Panel kzbin.info/www/bejne/q5nRonxqi76Ge9E MS03g. Rotary and Linear Motion Control Online Test kzbin.info/www/bejne/h5LIoXuVoLCXY5Y

[@deividasnaudzius6504]

Thank you MAN!!!

[@electricalautomation]

Glad it helped!

[@arbjful]

Wow this is great video tutorial, I am glad you posted. I was looking for this feature

[@electricalautomation]

Glad it was helpful! Thanks for watching! There are some summaries after 35:00 including tags numbers, screen numbers, and license. Hope this is a "ready to go" video for your implementation, enjoy it VoT!

[@user-wd5cb2up4q]

Great video. Thank you!

[@electricalautomation]

Glad you liked it!

[@tammamch1749]

Perfect 👍

[@electricalautomation]

Thanks and Welocme!

[@hetanhawke2354]

A lotof thanks Mr

[@electricalautomation]

Thanks, I really like this feature!

[@vorapobautomation9760]

Can do it in TIA V16 ?

[@electricalautomation]

Sorry, only TIA Portal V17 and S7-1500 V2.9 support 'view of things'

[@kamelhamdi2219]

Can I access to my PLC with a phone and control a motor for example ? Thank you

[@electricalautomation]

As shown in the video, yes, it is available

[@LeandroOrellana-u3f]

Hola, puedes subir un vídeo como enlazar un Point IO, Allend Bradley con un PLC S7-1200 de Siemens. Te lo agradecería mucho, ya que tengo estos equipos en casa pero no logro que se comuniquen.

[@electricalautomation]

Not quite understand, but please view my videos kzbin.info/www/bejne/sIaYd4x-e7BorpYsi=qGtyKY0FjPcpXVhF, and kzbin.info/www/bejne/qp6qo4Ccds2mpqMsi=fBLZ8C5xiuMEs-D-

[@deividasnaudzius6504]

How to make connection betwen siemens and wlan access point? I want get connection via mobile phone to veb page.

[@electricalautomation]

In the video, I was using the cell phone to connect to the Access Point which is the local IP network. This way, your access point is only needed to set its LAN IP address, and in your cell, set a static IP address or assigned IP address (same network as the AP LAN IP). If you are wondering a public IP from Access Point router, then it is about 'IP forward' setting in your router. you can search "IP forward an external IP address for local network" for the methods.

[@deividasnaudzius6504]

@@electricalautomation thanks i get connected :) maybe do you have experience to connect modbus rtu via beckhoff CX2500-0031 serial interface? i get connection betwen siemens S7 1512 and my temperature sensor via modbus RTU, but i fails with Beckhoff cx2500-0031

[@electricalautomation]

@@deividasnaudzius6504 Hi Bro, glad you got it connected. Regarding the Beckhoff Modbus RTU, I would recommend you switch your A-B wire. A acctually is '-', B is '+'. I temperally don't have video for the Beckhoff Modbus-RTU, but I would doublt the main problem comes from your RS485 wiring.

[@deividasnaudzius6504]

@@electricalautomation thanks i wil try this.

[@PhuNguyen-fl9zv]

damn bro , i've been looking for this , can i controll it with a distance ? , if so what is the longest ?

[@electricalautomation]

The cell phone showing in the video was connecting to a regular Access Point as the regular home used wifi AP. The distance actually depends on the signal strength of the AP. A industrial AP with 20db ANT usually can allow the devices within 200m to connect to it. A stronger ANT the larger distance for a client to connect.

[@ahmadamini5466]

​@electricalautomation hi, thx for the great tutorial. Is it possible to access the web pages through internet? Like regular web pages? If so is it enough to assign and online dedicated ip address?

[@zakwanizzat9797]

Hi bro, is it possible me to access web server page using Internet? I want to control remotely not local connection

[@electricalautomation]

Yes, it actually depends on the setting in the router. it is called IP forward. The router will forward a public IP directly forward(image to) a local IP. So you can access internet IP, then the router forward to the local device. Or using VPN. this is I prefer. Your remote device will connect the VPN to your local PLC, this is safe and reliable.

[@zakwanizzat5670]

@@electricalautomation thanks man, you are awesome and really helpful

[@zakwanizzat9797]

Hi Bro, I have try with VPN but unsuccessfully, Im using Tplink router VPN, doesn't work. You have any opinion for easy setup VPN without using siemens product

[@zakwanizzat9797]

The issue tplink VPN server cannot access, I also try NoIP VPN server doesn't work

[@zakwanizzat9797]

I got 8 units s7 cpu behind my router, so I want to access remotely web server thru Vpn