Combo Lock Bypass Tools: Easily Decipher or Bypass a Multi-Wheeled Combination Lock

[@davescopes249]

I just did this by using an old hacksaw blade and grinding it down. the thin metal you use has to be very thin but strong like an old clock spring. or obviously like I used an old hacksaw blade ground down. it works a treat. thanks for the video mate

[@joshhayl7459]

To: dave Scopes, You must have a really cheap lock for something the thickness of a hacksaw blade to get into, also, hacksaw blades deform and hold their Bend unlike these tools which are made out of steel with a higher temper so it flexes back rather than holding the bend on minor curves.

[@cacambell72]

Hold the damn lock still!

[@JAIMOUStheFAMOUS]

😂😂😂☠️☠️ I just died laughing so hard at this! The first comment like I agree, then this one he just skipped the whole “ thank u for the info “ and went right to the point no fluff, talking shit , just “HOLD THAT MF LOCK STEADY!! Period. I was thinking just that, as I came to the comment section! Lol

[@EristiCat]

I bought a brand new 175 lock a month ago. Since all these videos (yours and many others) have been posted MasterLock must have read them and redesigned these locks. They seem to have tightened up the tolerances plus addes some kind of internal block to prevent even thin shims from being slid in. Even using a piece of a coke can I can't get it past much of anything. Also tried decoding the wheels with a thin shim looking for the one where the shim goes deeper but they all seem to be the same depth.

[@johnhebberd2248]

Yup, bought this tool, found out it won't work anymore. Waste of money.

[@CheddarCheeseBandit]

@@johnhebberd2248 it works on older ones. There are millions out in the world, keep it in your tools. It’s not very heavy.

[@srr9281]

@@johnhebberd2248 Same experience, May 2023. Lock included with ITS kit even looks a little different, the shims included are [also] shorter than the one shown in the video. Sad.

[@BTC_DNA]

I appreciate the info, but please calm down w/ the motions and move slowly. Such rapid and erratic motions with your hands and the prop are distracting. When in doubt, move slowly, move clearly, and move simply. Thanks much!

[@barburous]

"Its probably hard for you to see this" well in that case try holding the lock still FFS.

[@Jackjack530]

Put it in, push down! Thats all you needed to say

[@mickb4221]

Nice to know why I am pushing it in and pushing down, have several of these locks floating about locked. Have the reset key but they have to be open first.

[@ayerjake]

skip to 4:30 to get it over with

[@leomorgan3105]

+Jake Meoff Damn, a six plus minute video for, maybe, six seconds of info.

[@A10DoubleHelix]

+Jake Meoff LOL

[@Bladerunner4924764]

+Jake Meoff Some people like to hear themselves talk...I guess.

[@mcdril5076]

+Jake Geoff Yess fuck! it took him tooooo damn long to explain it!!

[@unknown-me6hu]

thx man he was talking way to much

[@Draftmission]

For those who only want to see him open the lock: 4:07

[@Buick_GSX]

no, at 4:38

[@cristaa1491]

IT WORKS! I tried 2 other video's and the first one I ended up injuring myself twice, and the second wasn't even close. I was so excited I did a happy dance lol

[@Mur-lock68]

Hi Purchased 2 sets from you same lock doesn't come close to working was careful but broke 2 material is crap minimal resistance and it folds up like a cheap lawn chair! Your lock was either prepped for video or something is up! Let me know what you think I review these products and write fair reviews I mean I paid good money for them. Just by watching video i see plenty of clearance on your lock same Master 175 mine is so tight impossible!! Thanks

[@crazyd3mon968]

Scam School showed a similar bypass technique with this particular kind of lock however they made it seem much more fun

[@tonytjobrien8611]

Should you remember the combination after using the recorder will the lock function normally?

[@themadhacker9376]

lost the combination to my bike lock when i was younger, fortunately i lived next to the tracks so i found an old rail road spike. we were also building a brick patio so we had spare bricks...not hard to solve the equation

[@JAIMOUStheFAMOUS]

Hey good clear info. Thanks. But hey do u watch LPL KZbin videos? We’ll probably but it’s worth mentioning that. Maybe you should invest in a good vice like he uses to hold his lock at the perfect position and focuses the camera at an angle that you can see precisely what he’s doing during the demonstration. of how precisely he’s manipulating the lock lock

[@chauffeurmarco]

That padlock exist since decades. I saw this in the 70's. If only I knew when I was a kid. 😤

[@thmpick]

I have one of these locks and lost the combo over 4 years ago but kept it.... If I open it with your tool, will I be able to assign it a new combination? I went to your site but can't find the 2 piece pack you mentioned...only a kit with other things I have no idea what they are. Do you still offer the 2 pack mentioned here? I would like to bring our old lock back to life if I could? Thanks

[@kristopherburkholder9366]

regardless of the combination ,if you hold the lock so the numbers are right side up with the code set to four zeros , pinch the shackle in then boot heal or a large stick hit the lock hard on the side which should be facing up and knock it out of your hand . if you do this correctly it will open every time without breaking the lock , and it will relock . do not use metal to hit the lock, a stick about the size of a hammer handle is perfect . works on most locks this style...

[@jordanbigpimp6538]

Ima need a video bro

[@user-rw3qq2sr1z]

- What is the thickness of the "decoder"? - Will the decoder work in any other lock, brand? - Will the decoder work next to any dial on the lock (all that needs to be done is to lift that internal locking bar)?

[@mfx1]

Agreed with the comments about how long this is, don't want to put you off posting these videos as the content is good but you tend to beat around the bush, repeat yourself too much and spend far to long just getting to the point (not just on this video either), please take this as friendly constructive criticism.

[@AdrianWeber]

Anchor Las is also offering very neat padlocks.

[@metatechnologist]

Thanks for the video. However I got dizzy trying to watch as you moved the lock around so much. It would be far better if you put the lock in a vise and point to things. Look at bosnianbill's excellent videos.

[@inthego]

so.. what lock do you Brian, use for your gym lock? Tell me that.

[@shycourgette]

Dude thanks so much for this video. You saved me this morning when my lock was not working. Amazing, thank you so much,

[@jgarb21]

Once open can you reset the combination without knowing the previous Combinatino that you bi-passed?

[@josephhilson1721]

Actually you can just give the lock a sharp blow with another lock or a tool of similar weight. A small hammer or screwdriver works fine. The blow causes the "paddle" to jump or rotate. Simpler but quick.

[@DarkShiftMusic]

You say brief video... but I see a 6 minute video on how to push a super thin piece of steel in a certain direction.

[@dragonusmc0311]

kool vid are there any pick proof locks u can use for a gym locker....?

[@KBMB47]

I just ordered the tool…..thank you WW

[@Charles77598]

Great video and it is nice to see the inside view of the lock.

[@burtwar3534]

Can you use a cut up aluminum can for the lever??? Or does it need to be steel???

[@theartfuldodger935]

This video literally could have been 20 seconds long.

[@FuckBitches831]

Yeah, but, skull fucking, aneurysm growing, needless repetition is what gives the dipshit masses, I mean dumber foke the ability to learn. 😊

[@Tarakian1999]

The only one who made you watch it is you. You wasted your own time.

[@Durttar695]

LOLOL, me and 200 other folks agree with U, @artful 👍🏿💤😡 RIP

[@Ultimate_nutmaster69]

That'd why it's on shorts

[@miguelfoullie7917]

Once you open the lock with the bypass tool can you use the reset key to enter a new combination or does that only work if you have the original combination entered on the wheels. Thanks

[@Covert_Op]

Damn good question

[@KBMB47]

I thought you was a great video and explained excellently.

[@j.morrison73]

It will be a lot faster and easier just to cut the lock with bolt cutter, assuming you have to search/send away and pay for this special 'tool'. Using this doesn't save the lock because you still don't have the combination. And you can't reset the combo, even if it's open, unless it's on the comb to begin with. With that said, those that made comments about the video being too long, or fidgeting, think back to grammar school doing math work. teacher wasn't satisfied with the answer, they wanted to see how you got to it. Ending, I think it would be just as and more important to us is if you gave the dimensions and thickness of the tool. It would eliminate a week or so sending away for one.

[@afb514]

ITS Tactical , Can could these also be used as quick sticks, I can't see any difference between them?

[@mikesimms4525]

Besides agreeing with others about all the yakking and constant lock flipping, I have another comment. YES it's a bypass tool but it DOES NOT seem to earn the name, "decoder." There's no decoding !!! However, thanks for the bypass info.

[@LessTalkMoreDelicious]

Is the Sesamee AB410 the same and easy to bypass, or is it pretty secure? I'm looking for a new small padlock I can travel with.

[@MrJessieJames2010]

When do we get to see the decoding part? Using a pick to open a lock is picking a lock.

[@MarcLerchs]

Brilliant... and very well explained. Greetings from Belgium.

[@nw1911guy]

So how does it decide the lock? Was hoping for a way to figure out a lost combination.

[@ledosecur]

Hi mister! What I should if I don't have that kind of key?

[@nintendobacon1]

this is a perfect example of what my dad always said, "every lock, no matter how tough or complicated, it will always be a deterrent

[@lp115lp]

Try holding the lock still so people can see what you're doing.

[@hyperion9142]

I know, right?! Poor presentation just for the lock moving around!!!

[@lp115lp]

Ok, guess it's just "on me" and my shaky eyes.

[@_mattlux_9525]

is this not just a shank bypass not rlly decoding is it ? and i have been told thats a good way to break a decoder

[@dirkdiggler2430]

How do you figure out the combination after you open it?

[@regexRex]

What's the difference between the EZ Decoder and the Quick Stick?

[@readysetsleep]

Use a hair clip it's cheaper..

[@MrSQUIDWAZherE]

is this possible to do with a nail filer or a bobby pin/ paper clip?

[@Robin-gf7bd]

Does that work on a suitcase combination lock? Specifically a Hartmann vintage suitcase.

[@shawnhunt2332]

How about figuring out the combination numbers, after you unlock it ??

[@lma2256]

Thanks guys! I've had to bust or cut several several pad locks this year because of my poor memory and my wife losing keys.

[@smgri]

cool ..thanks ...what about a 3 roller briefcase lock,,,would that work!?

[@annwithaplan9766]

+scott garvey I was given a briefcase with a lock on each side and not combo. So I sat for an hour or two moving the numbers into all the different sequences starting with 000 until I got the right combo! It would have helped if there was an easier way. I also have a bike lock I'd like decoded.

[@smgri]

yea i gotcha...must take a while that way i would think

[@annwithaplan9766]

"no combo". Yes, it took awhile and I tried that method with the bike lock, but it has four numbers and I gave up haha. Once I find the lock I will try it out.

[@smgri]

there is always the pry bar

[@jgilbertg5719]

What if the lock doesn’t depress at all before you try to pry? Bought this product but can’t get it to work

[@punishrs]

will this method work on brinks brand of lock? .looks similar I have one I can't open..tired changing combination and goofed...old combination and new one I thought I was setting does not work now..

[@johnsnow625]

Is it possible to use this same technique on a combination gun trigger lock?

[@joshmullins4827]

Is this the same thing used in the other video to open the tall blue lock

[@texasarchery9992]

After you open the lock, can you set a new combo?

[@rc_youtubeaccount1331]

what are the tricks to ensure it shall ne inserted into the third slot and the left side?

[@gqusaf]

Any way of resetting combo after picking it open (without knowing the original combo)?

[@Deekthagnome]

I wonder if this same tool and concept would work with luggage locks that are multi-wheeled combos also? (mainly briefcases)

[@devenbethel06]

yes it does

[@GoldshackGarage]

ok, so I watched your video, it was awesome. The only thing you should try, is a tool that someone might already have around the house, like a bobby pin. I grabbed one and broke the tip off and it worked so well, got the lock unlocked in seconds. The cut a way lock definitely helped, but your video could have been shorter. Thanks man.

[@tonytjobrien8611]

Tried the Bobby pin/hair clip and it opened less than two seconds. There was no space between the wheel and the housing, so put it in flat over the crown of the wheel turned to the left side to make the space and hay Preston. Can't believe how simple and fast.

[@rolanddeschain767]

o my question is this technique seems rather particular to band/model. Does this tool work with all/most multi-wheel combination locks?

[@ianarno]

Very cool, the only type of lock I knew how to pick or bypass before was a pin and tumbler.

[@austinstrate6880]

Will this work for any combination lock?

[@AceTheDragon3]

Great. Now my bike is REALLY INSECURE. Thanks guys.

[@CrimsonRaven51]

Can I buy a combo lock with the cut out area for practice?

[@fearlessfred89]

My lock won't allow any tool to fit next to the third dial no matter how thin you make the tool. I machined the tool to the point where it was as thin as a piece of paper and it collapsed and broke I have up on shimming .. The single dial method worked

[@beotheguitarist]

Does this tool work with the Sesamee combination padlock also?

[@johnwebb22]

I found a 4-number dial combo lock in the military 45 years ago that was being thrown out. First number is dialed to the left. Any idea how to figure it out? I had another like it that I opened just by twirling the dial a few times. Don't seem to be able to do that with this one.

[@haconosopit3916]

I have the same padlock.. after i set the correct combination, why i have to press 2 or 3 time to open the padlock.? I think theres a malmechanism in my padlock.. could you help me to solve it?

[@reg428]

What's the difference between the ez decoder and the quick sticks?

[@michealbeers777]

....I fell asleep waiting for you to actually show us how to pick the lock!

[@mikecummings4715]

If you can't last 6 minutes your girlfriend must be disappointed

[@ricstormwolf]

I've seen some of his other videos. He does kinda explain things in a little too much detail, doesn't he?

[@Atlas255]

@@mikecummings4715 damn that’s an amazing insult.

[@petercousins1645]

Doubt if this will work on a Squire 5 reel lock

[@MrAlex173]

thought this would be a good video but then he had a master lock, a toddler can crack those

[@mikebenincasa9081]

What watch is that you are wearing?

[@luckyluch808]

hay whats up.. i use these sticks for work as a foreclosure inspector and they are great. but i just ran into a brand new combo lock with a new blocking device installed to stop the stick :-(.. u guys need to make something to bypass the new system :-)

[@marvinbenson5655]

please indicate how to obtain this tool. Could not hear what was said at end of video.

[@beansoup6056]

would like to order the ez decoder but couldn't understand the website you mentioned. if someone understood could you please send it in comments thank you.

[@jaredmccullough411]

Does that work for the locks that have the combo on the side instead of the bottom?

[@johnglauser801]

Des this work and how, on a briefcase or security case which yo have forgotten the code. i have a case (my own) that has 2 set of 3 dial combos. and i would love to see what i have forgotten. other personal situations - all my own! suggestions? thanks

[@cerealkiller3175]

Does it work on luggages?

[@laospeedwagon3023]

I’ll agree that this video could have been a LOT shorter, but my question is this: Hasn’t the Masterlock 175 been replaced already by the 875 which cannot be bypassed?

[@nicoscience]

can you use a quick stick to unlock a multiwheel lock

[@johnheilig9327]

Will this work with a sesame lock as well?

[@jeffackerman6333]

can you open a Master Lock M40XDWD disc combination lick with 4 wheels & letters instead of numbers?

[@bradeneskew4154]

Where did you get that piece of metal?

[@MrTubot]

This makes it easier for thieves to still other people’s stuff. If I lose the combination for my lock I’ll cut it and get another.

[@majikdragon]

Is that a master 175? because I just made one of those with a feeler gauge and that didn't work...

[@terry3254]

Master are so helpful. If you forget your code, there's an ultra secure (not) cheap luggage type keyhole on the side. These guys are so helpful. Never buy Master locks. You may as well put up a neon side and a penny turnstile for thieves. At least you'll get a few pennies back.

[@stanmarsh2499]

Only allows for resetting the combo once it is open. Not like a tsa lock. Not saying master makes anything respectable just pointing out that this particular lock isn’t susceptible to the attack you mention.

[@albert4321234]

does it work the same with 3 digit lock?

[@jeffreybateham9527]

my question is how to figure out your code... i have had mine in a box for years and honestly cant remember the code... i want my lock to work normally, as for the rude comments below...piss off at least the lock it not a total loss now...thank you ITS Tactical

[@gpcm9226]

Subscribed! Thanks for the knowledge

[@andrewroney2987]

Does this work on a cabinet lock with combo wheels?

[@TheMattd546]

Doesn't the ez decoder also open up most pad locks that are not a combo lock?

[@thevacuumtubejunky9774]

A .012" inch automotive feeler gage shaped with A Dremel moto tool works great as well.

[@thomashassett1259]

Sooo where can we get one of those!?

[@AllSeasonsContainer]

if you kick or hit the lock hard enough it opens too we have the same locks at work I do it all the time everyone of them new or old

[@ryanstuart8786]

you do no so many crooks are loving this vid inc me.

[@thevacuumtubejunky9774]

What's the thickness of the shim?, heck, I can use an old set of feeler guages to make one of your Star trek decoder shims!...lol

[@jaybuiifan2724]

Can you use a paperclip

[@noahcook9064]

does it work with a paperclip