Comgrow T500 and Clockspring 3D Print Furniture!

The Comgrow T500 is a MASSIVE machine, and just like I promised on the live, I 3D PRINTED A STOOL. Who better to help show it off than Clockspring3D!
T500 & MORE ▶ comgrow.com
MERCH! ▶ the3dprintingn...
Patreon ▶ 3d.pn/patreon
FloatPlane ▶ www.floatplane...
Bambu ▶ 3d.pn/bambu
Glowforge ▶ 3d.pn/glowforge
Prusa ▶ 3d.pn/prusa
Puget Systems ▶ 3d.pn/pugetsys...
Slice Engineering ▶ 3d.pn/slice
MATERIALS 🦇
Polymaker ▶ 3d.pn/polymaker (aff)
Printed Solid ▶ 3d.pn/printeds...
Amazon ▶ geni.us/shopat... (aff)
Matterhackers ▶ 3d.pn/matterha... (aff)
Proto Pasta ▶ 3d.pn/protopasta (aff)
Nikko Industries 3D Printable Models ▶ bit.ly/3lK0WHi
THE TEAM! 🤟
Host: Joel Telling ▶ / joeltelling
Executive Producer: David Tobin ▶ / david_tobin
The Website ▶ the3dprintingn...
--------------------------------
Find Me Socially!
--------------------------------
Twitch: / joeltelling
Twitter: / joeltelling
Twitter 3DPN: / 3dprintingnerd
Facebook: / 3dprintingnerd
Instagram: / joeltelling
Instagram 3DPN: / 3dprintingnerd
Discord: / discord
--------------------------------
Want to send me something?
--------------------------------
3D Printing Nerd
PO Box 55532
Shoreline, WA 98155
USA
Music in Episodes Comes From:
Epidemic Sound - 3d.pn/epidemics...
Future Vega - futurevega.sou...
Audio Micro - www.audiomicro....
FTC Disclaimer: A percentage of sales is made through Affiliate links

[@ComgrowOfficial]

It's wonderful to see T500 reach this stage once again!💗 As Joel mentioned, T500 users who come across bubbling or ripped surfaces are welcome to contact us for new build plates that have been optimized.

[@joserafael9913]

What's contact e-mail?

[@shelbyM-r9h]

i got 3 replacement beds. 2 replacement mosfets, 2 full hotend assemblies. and the new one i had to QC because it was seemingly assembled by a child. and then the firmware crashes. you suck comgrow. fight me.

[@cayvo1522]

@@shelbyM-r9h you recently purchased it?

[@Clockspring3D]

Words cannot express how much fun it was to film this, and to just hang out with Joel and Courtney! Thank you both for just being the best people ever! ♥♥♥♥♥♥

[@RoamingDeparted]

I love your models, everyone should subscribe to you on printables. That being said, its wonderful to see what a fun guy you are, now I see why your models are so fun. Thank you!

[@FilamentStories]

This was so fun to watch. Love it! You two are so great together.

[@CallumColes]

Loved the cameo appearance!

[@hanslain9729]

"A hairy stool isn't anything to worry about.. You don't need to see your doctor." 😂

[@Viking8888]

Wait, I thought you wouldn't have to see your Doctor if you had a smooth stool, but a hairy one would indicate an issue! Boy am I glad I saw your comment! 🤪🤣

[@Pixelplanet5]

Code doesnt work, they only have two different filaments on the site and both are not free with this code.

[@Padrick77]

Have to click on the filament name not add to cart and select the single roll not the 2 one

[@Pixelplanet5]

@@Padrick77 clicking on the name does nothing, theres no product page behind the name.

[@3dprintdawn]

it's fun and t500 is what I am looking for! thank you joe for pointing out the fix they made!

[@Tanner3D]

If I had this beast of a machine in my life, I might run out of excuses for finishing the design on that aircraft carrier toy (estimated at around 8.5 - 9 feet long)

[@suzyamerica4679]

Hard to make certain kinds of stuff /without/ a printer.

[@3dtechnologies153]

Good to see that things are LOOKING UP for you guys.

[@christianhuff8629]

I had to give a like after you guys shared a stool. 😂

[@pixelrancher]

Nice stool sample.

[@3DPrintSOS]

Haha. Laughed out loud when Courtney popped up with a coin.

[@FilamentStories]

I had the best time watching them film the video. They are just too much fun together!

[@rcmaniac25]

Can confirm: it stooled. Clockspring and Courtney and Joel: a trio for the ages.

[@Clockspring3D]

Can doubly confirm! This was even more fun than it looks like :D

[@Padrick77]

Thanks for the free roll of filament Comgrow

[@larrynickell4487]

So thank you Joel and Comgrow

[@syranth8912]

I love it! I know that chest because I printed one as a gift for my wife! I love 3d printing!

[@grantdeisig1360]

That's funny, I was just about done and getting ready to hit complete order and it popped a window open saying item out of stock. I must have missed it by seconds....lol

[@goolgehatter1597]

Did you break the the surface of the print bed while removing this print or did you do it on another print? Mine broke when removing the first print. Seems like a common failure.

[@goolgehatter1597]

OK so I saw you answered that in the video =)

[@andyb7029]

I think I got a free roll of filament😁 thanks Joel. Thanks Comgrow.

[@BelviGER]

I have a 40x40 bedslinger and i regret getting it because it is too big for a bedslinger, anything beyond 30x30 is corexy territory IMO You need double the Y value for total depth of wherever you place it

[@Gorilla_Jones]

Just setup my T500 and it won't power on. How did you get around this?

[@3DPrintingNerd]

I had to flip the voltage switch back and forth a few times.

[@thenextlayer]

I have the same issues with my T500, actually... my build plate sticks too much (first batch), and also stringing on my profiles I haven't had a chance to fix. Fun video though!

[@dakotabriceno8592]

Looks like code only works on individual spools but they are sold out of individual spools.

[@Lance_Tonkin98]

"...Where the earth curves"...lol that got me. Imagine the earth having a curve.

[@myredeemerlivesakatom2314]

Was one of the free roll winners. Comgrow sent the roll but it was addressed incorrectly and the returned to sender. I contacted them as soon as I noticed In tracking info. I contacted Comgrow and it has been 5 days with no response. Not a good look for this company. I doubt I will ever see my “free” spool.

[@BurntUpCustom]

Setting up my atomstack a70 max now.

[@rickmellor]

That was entirely enjoyable to watch.

[@Chad.The.Flornadian]

Universe is unlicensed...tisk...tisk... :o)

[@MBDyson829]

I don't remember what it was called, but I saw a video your video a couple years ago about the next level of FDM printing where the print head is able to change height while laying down layers to make smoother transitions between layers with less of the step effect on curved surfaces. Is this still a few years away on consumer printers?

[@3DPrintingNerd]

You're talking about a dynamic layer height, right? Printers can do that now - it's a function of the slicer!

[@MBDyson829]

@@3DPrintingNerd Thats good to hear. I'm getting back into printing after a few years break and was wondering about improvements. I did some googling and non-planar printing also came up. That might be what I was thinking about.

[@chadwickwood9843]

Joel, have you noticed any adverse health issues from all the printing you’ve been around over the years?

[@3DPrintingNerd]

Nope.

[@rickb8371]

Hello, thank you. Regarding the Comgrow T500 Does anybody have by change have the slicer profile settings (start / end g-code) etc... for Prusa slicer or Bambu slicer? thank you.

[@larrynickell4487]

Code definitly works atleast it worked for me

[@RobertA-hq3vz]

I'm using G10 sheet for 3D printing. When its hot prints stick hard to it, but once it cools down the print just falls off. Also, how much did this stool cost, compared to a simple wood stool bought from the store.

[@yvan2563]

T500, eh? I think I'll wait for the T800.

[@f15sim]

Spoiler alert: This will not end well.

[@chaymber_crafts]

That was a fun Video!

[@DextarRogue]

Never thought I'd enjoy a video about a stool...

[@reprinted3D]

Sven is adorable!

[@kaween1000]

Imagine the T500 with a Chromahead. If that would work well, a LOT of companies would start to worry big time. (pun well intended)

[@EOTG_AK]

I just extruded a massive stool myself!

[@3DPrintingNerd]

CONGRATS! hahahha

[@luciebubenikova4590]

thats one big printer

[@Gorilla_Jones]

Sooooo you like the T500? Mine should be here today. Can you do a tips and tricks video for the T500? I thought this video would be that, but we got comedy instead lol.

[@MichaZajaczkowski]

"Back to the filament" :D

[@LincolnWorld]

Joel is a 0.8 nozzle, and Sven is a 0.4. I've given Joel a couple high-fives in person. I'm a 0.2 nozzle in height comparison. Thanks for another fun video. High-5!

[@runehovde8674]

Code works, but does not ship to my country :/

[@protomanialab]

Interesting! I have to add a (big) stool tutorial on my CAD tutorial 😀 and you can print it 😀

[@__--JY-Moe--__]

how'd mr. clean get in their? Joe never makes little messes! COMGROW wid Me! emergency nine eleven can I help U : yes, theres two idiots trying 2 hang themselves!

[@EricIannone-nf1nb]

Is this the last T500 video? hopefully not.

[@3DPrintingNerd]

I hope not as well!

[@markzipf6802]

GOBIGORGOHOME LOL

[@siberia21]

so cute, but interesting Printer!

[@diegogallardo8552]

Hello Joel! Your videos are very interesting, congratulations, I need your help and know which is the best color 3D printer and the fastest to make realistic figures, regardless of the price, it is for scanning real people in 3D and then making them to scale but not be it in resin, I would appreciate your response! thank you

[@3DPFactory1]

Ah nuts, missed it. Snooze ya loose

[@jakelyon7466]

You should do a review of the HSP-1

[@ImaginationToForm]

you should next print a huge stool on the T500.

[@brandxndp]

ah, good to know im not the only one who suffers from red giant universe just deciding i no longer have access 7:34

[@Bystronicman08]

Code doesn't work.

[@miguelcuevas2976]

Open source?

[@bysalla]

code works!

[@Mupshot]

Sadly going big wasn't in my favor, so I'll go home

[@meisenhut31]

The numbers of "stools" in this video was excessive

[@tastyticklingtatertricksho7724]

I bought this printer and it has not worked right from the start Comgrow customer service have giving me nothing that helps.Really disappointing experience never buying from Comgrow again. I watch alot of your videos and i like your content alot but this printer is unfinished with bugging firmware that is bairly making it work. I really regret buying this machine

[@Andyah]

hm u did cheat with the heatgun.. u should highfive the paper to heat it up ;P

[@hojokono]

all the fillaments are sld out

[@Etrehumain123]

Im not very impressed by the stool, you are litteraly standing on top of several spools, nothing special, it's just big which sounds like a waste... Sorry if I missed the joke :(

[@rikksullenberger6864]

Honestly, no information or testing on this printer. This was more of an infomercial pushing the product…

[@3DPrintingNerd]

This was me doing a project with the printer. Why did you think I would be testing a machine in a video that specifically lays out what I did?

[@rikksullenberger6864]

@@3DPrintingNerd it’s a new printer, I watch your videos because I trust your opinion. I was looking for your opinion.

[@3DPrintingNerd]

@@rikksullenberger6864 That's fantastic to hear, I'm sorry I didn't showcase enough here on this project video. I may do more with the T500 down the line.

[@georgehewitt3516]

go big or go home

[@MrGerhardGrobler]

1st here🎉🎉🎉🎉

[@galactic3d]

half a video of nothing

[@3DPrintingNerd]

A full comment of nothing. Good job :)

[@galactic3d]

@@3DPrintingNerd so you thought that the first half of this was useful? or just spamming you tube? Good job: Not

[@Matt6438]

Can someone help me please I was in a bad motorbike crash and paralyzed my left arm I'm also a gamer I thought my gaming was over until I tried using my mouth for the left stick and I'm as good as I've always been anyway I have some ideas that will help me gaming by having them 3d printed but I don't know anyone or anything about 3d printing so can anyone maybe give me names or details of people who can thank you.