I'm in a few different motorized bike groups online one thing I've heard over and over is people like the 100s but turn away from them because of the lack of aftermarket parts so I think that would definitely make some people happy
@tonytaylor5087 Жыл бұрын
I agree. The more I run it the more I want to test an expansion chamber, cnc head, etc
@Nostalgik64 Жыл бұрын
i ordered my motor last week tony. i want my motor now tony
@robertbutler23208 ай бұрын
I'm sure I could speak for all of us. We would all love expansion chambers for the 100.🙏
@tedstrom2786 Жыл бұрын
I would love to see more parts for the 80/100. I think that it would be cool to have it eventually be similar to the 66/80 engines in aftermarket part availability.
@cheri758Ай бұрын
Idk why people just say those 80cc are 80cc motors as they are not, like minarelli’s they are same bore and stroke yet 70cc wich is close to true capacity, same with those 100/80 engines
@russelllangford1677 Жыл бұрын
I have 3 of the 100cc engines and as far as power goes, they have a lot, I've put a modified exhaust from a pit bike on one of them and it increased the power by at least 70%, the only drawback that I can think of is that a the engine gets really hot and the clips for the wrist pins will warp and get hung up on the sides of the cylinder, causing it to mess up the cylinder. You might as well buy a new replacement engine for what they are asking for just the cylinder and piston kits.
@anarchyjewelry2885 Жыл бұрын
My 2 cents I have had the yd100 for a while and find they like to breathe the more air in and out the better. Like most engines I suppose. But this one in particular bigger carb, expansion chamber, more spark all of these adders just to a stock internal motor is incredibly helpful. 10 to 15+ more mph. If you want to get really crazy with this motor and do 50mph it is very attainable. I trade off a little for torque because I'm a bigger guy with a larger rear sprocket. But if you want that top end cruising speed just those three adders you won't be disappointed. If someone comes out with a nice head and some piston work. Nobody would be buying the 66/80.
@CMG78 Жыл бұрын
performance parts for the bt 100 would be awesome
@robschlotterbeck2566 Жыл бұрын
I guarantee if exhausts were made for the BT and 100 they would sell. Even designing a new jug and head with a standard exhaust port would sell, I wouldn’t think that you could keep them in stock. That way you could use all the China doll parts like the upgraded heads and the standard pipes would just bolt on. The only reason people buy the BT80s is for the electric start. Opening up the door to modify them would sell even more.
@zbk484 Жыл бұрын
Even making an adapter from the bt to the stock exhaust pattern would be fantastic, then you can plug ang play an aftermarket exhaust you've got laying around the garage.
@tonytaylor5087 Жыл бұрын
That’s a good idea. Hmm
@amber6804 Жыл бұрын
Bike berry should expand over to the UK
@cheri758Ай бұрын
Nah they are doo doo selling some “stage” engines charging insane price for a stock engine with a different head, diff air filter and red wire on bone stock cdi
@cheri758Ай бұрын
Also those cheap expansion chambers they offer, every single one of them does not do anything as its for a 25-50cc engine at most, only the deluxe pipe is worth something but still overcharged for a china mz65 clone
@jonjohnson4741 Жыл бұрын
I personally would like to see 2 piece jug and cylinder head so that in future those parts could be upgraded or replaced as well with the expansion chamber personally that is what kept me from buying this style
@tonytaylor5087 Жыл бұрын
Yup exactly, those should be staples.
@jonjohnson4741 Жыл бұрын
@@tonytaylor5087 my first motor had the one piece jug style and when someone before I purchased the bike stripped and cracked and exhaust housing bolt I just replaced the motor with a more updated motor with the open transfer ports and the head went to cnc but the one piece design alone makes rebuilding a lil more
@MatthewLopez-os2pt Жыл бұрын
I got a 80/100cc and would love to get more aftermarket upgrades like expansion chamber options.
@warlock.420 Жыл бұрын
I'd love to see a v-twin bike engine tbh.
@burgard2010 Жыл бұрын
I just got my 66/80 yesterday. Can't wait to get together. Will let you know.
@devincaesar-walker2811 Жыл бұрын
please please make custom stuff for the 80/100 ima order one tomorrow
@seansmith7054 Жыл бұрын
Please
@Shadow0fd3ath24Ай бұрын
having a clutch is SUCH a cool idea...94 shipped for a full 100cc engine kit online is wild for a working complete engine...gotta get me one!
@saleen3933 Жыл бұрын
Just watching the last video and I was thinking about this combo lol
@saleen3933 Жыл бұрын
I have the 100cc one and just got a exhaust and the boost bottle. Great up hill and fast I love it.
@tonytaylor5087 Жыл бұрын
So good!
@MrThatnativeguy Жыл бұрын
Interested in the BT100 performance parts me and a couple of my riding buds have em and they are good running motors
@tonytaylor5087 Жыл бұрын
Sounds like lots of folks have them!
@brandonwyatt39016 ай бұрын
I would love more parts for the 100cc. I was going to buy one but for the price I just got a stage 4 kit from you and I really want mire power like the 100/80cc but to get into making custom parts is waaaay outside my range of comfort, price range and time. If you worked on a 2 part jug and exhaust adapter that was roughly ported to match the bbr kit it would get alot of traffic I'm sure
@colbycoleman5366 Жыл бұрын
Expansion chambers for the bt 100 for sure they give a lot more power
@Dom-zs6hk Жыл бұрын
Please make more aftermarket parts for the 80/100cc I just ordered the 100cc engine kit
@tonytaylor5087 Жыл бұрын
Let me know how you like and use it as I’d like to focus on the most important upgrades. Thank you!
@skipstalforce Жыл бұрын
THe lack of exaust options is the exact thing that keeps me from buying one.
@tonytaylor5087 Жыл бұрын
I hear you!
@larryshaver3568 Жыл бұрын
do you have an upgrade magneto that can at least power a headlight?
@StickPeopleAndPuff Жыл бұрын
I'd love to see bigger bore jugs available for the 66/80's. This way we could use/adapt larger pistons from scratch or other engines
@codyarnold2197 Жыл бұрын
They are just order a 50mm topend for mine
@motorizedbicyclenation53cu90 Жыл бұрын
Honestly the nerf job w the new 2ting piston … last year… idk what it’s like now but… they locked up left and right the one before it tho was indestructible
@Tegridynews Жыл бұрын
Got My 80cc on a 29er and runs 41mph sofar with a speed carb, Expansion chamber exhausted, and 36 tooth upgrade cdi and coil
@nealp.28416 ай бұрын
I would love to have an expansion chamber for my 100cc!!
@motorizedbicyclenation53cu90 Жыл бұрын
Why not show the clutch in the bt100
@usa51254 ай бұрын
Hello I need help with the engine it got jammed the first one like was in the video the 80/100cc I need parts for it where can I buy then like thole top part the cylinder and I need the piston with the piston rings please help.
@nicholasvine9959 Жыл бұрын
I got a few of the bt100s personally you guys need to make exhaust for it there's no options also you guys don't even carry the piston in stock no more and I'm needing a new piston for the 100
@Westhelockpicker Жыл бұрын
The high performance heads just help with cooling mostly but a good expansion chamber exhaust is something you should do because you would sell a pile of them right away. Are there any differences between this and the zeda 80/100cc? You can get the zeda in a two piece cylinder and you can get a good expansion chamber exhaust because the flange is the same as the others but other than that
@stevenreid716511 ай бұрын
I have the 49 cc and the 100 cc and my 49cc passes the 100 cc up because one is hub driven and the other is spoke driven
@seansmith7054 Жыл бұрын
I love building motorized bikes and have a couple. I think it would be great to be able to modify more in the 100cc, there’s not much you can do with it.
@ExecutionStyleInc15 күн бұрын
Question: Did they ever upgrade the 100ccs for additional modifications? Would love to run different heads/exhaust chambers.
@joelboutier1736 Жыл бұрын
very similar findings with my two engines. I had an 80/66... I don't even remember the brand name. It was grossly underpowered. I had changed the sprocket to increase its speed which made it really struggle on hills. Luckily the cylinder blew after about 8 months of use (terrible reliability). I bought a much more reputed 100 cc Anbull & switched to a very high quality 2 stroke engine oil from AMSOil (oil is cheap & engines are expensive. The performance is like night & day. I hit mid to upper 30s top speed according to a local neighborhood speedometer. Sometimes I have to make 3 passes for it to recognize me because it's only designed to pick up cars. I definitely would NOT want it to go any faster. It's as fast as I would want it to go. Don't forget this is just a bicycle with V brakes. 😄 Spend the extra $50 or $60 & get a brand like Anbull or what they sell on BikeBerry. You won't regret the purchase
@tonytaylor5087 Жыл бұрын
That’s some great insight my man.
@londyn9606 Жыл бұрын
I am currently building a 100 cc up so yes I am looking for as many upgrades as I can get ..
@williamlongfellowjr.1 Жыл бұрын
Awesome video o n the inside of case housing and go high on the upgrades
@fbi424 Жыл бұрын
Why does my gear (the place where the chain goes in the engine) not spin freely? I just brought mine Please help brother
@butilostmyshoe Жыл бұрын
Need expansion chambers. I'm already thinking about modding my stock exhaust.
@tonytaylor5087 Жыл бұрын
Me too
@dylanosborn73 Жыл бұрын
Definitely make 100cc performance parts
@NateBuckman-ob1wj Жыл бұрын
I would like bike berry to sell the 100cc with exhaust that is like the 66/80cc and the jug be separate from the head.those big heads really give it some extra life
@jamesmower1852 Жыл бұрын
You guys need to design a jug with the third transfer for to make the Reed valve system work properly that would be amazing
@robschlotterbeck2566 Жыл бұрын
Any exhaust options would be great for the BT! Just a short run to see how fast you sell out would be great.
@tonytaylor5087 Жыл бұрын
For sure, I’m thinking of welding up a test one just to see!
@joelboutier1736 Жыл бұрын
I’ll tell you the best exhaust option… get rid of the exhaust completely! Ya it’ll make it way too loud but it’ll also give it an extra 20-30% more power because that motor has no restriction. I drive around Atlanta & I don’t care if it makes noise. It just makes it safer to drive if everyone can hear me. I have some shoes I wear for riding because that 2 stroke exhaust blows mostly right out towards my left shoe. I think the louder noise is well worth the safety & extra power I get. It’s worth messing up an old pair of shoes. Just get rid of the exhaust altogether.
@Nostalgik64 Жыл бұрын
i also hear that the circlip's your using are more prone to fail then the e design.
@TheFaceeater420 Жыл бұрын
i love the bullet train and i would love to have a different exhaust not just a expansion chamber but also something like the f2 thruster and the street popo i like a long pipe but thats just me
@tonytaylor5087 Жыл бұрын
I like them also!
@dustinh4175 Жыл бұрын
I'd buy a 2 peice cylinder and head and an expansion chamber for my bt100. A longer intake would be good so the gas dosent boil back up the fuel line and blow your motor. The stupid bikeberry website said it was a 40mm intake so I bought a longer 40mm intake and it didnt fit, I had to narrow the bolt hole pattern signifigantly and file a flat spot into my bolt washers to get them to sit flush. I'll update this tomorrow when my new 32mm intake shows up to verify the correct size. A package deal on a better top end + pipe would be sweet tho.
@adamsmy81218 ай бұрын
How does the 100cc compare powerwise to a stock 4 stage 80cc?
@RngdMtrx Жыл бұрын
damn straight we want 100cc upgrades, PLEASE!
@LaCourierInCrysis Жыл бұрын
I'm in , BBR Tuning is my shit
@benjaminsanchez1031 Жыл бұрын
Pt parts for 100cc would be awesome 👌
@JonathanJefferson-cr6rx24 күн бұрын
Your like 😊 prophetic
@jessiepaulin675 Жыл бұрын
If the 80/100cc boosted at stage 4 would perform and outlast the 66/80cc at stage 4, then i would throw my money on the 80/100. Im in canada, and im sure i could make a small business out of this
@aidencheng17875 ай бұрын
realistically how fast would a 60/80cc engine go if i were to put it on a basic go cart. My friend gave me his used 60/80cc from his bike but i want to make a custom gocart and isnt sure if that is enough power
@motorizedbicyclenation53cu90 Жыл бұрын
Do bt100 still have the grooved slotted drilled clutch plate or just a stock plate with holes drilled in it
@tonytaylor5087 Жыл бұрын
Something I’ll have to look into.
@jayrazz8499 Жыл бұрын
More 66/80cc Parts!!!!
@melvinbland3372 Жыл бұрын
It would really be great if y’all made an upgraded exhaust pipe for the 80/100 cc motor
@gofast41272 ай бұрын
I threw a tach on mine got 7,860 RPM at 41 mph 66/80cc (stock unported) on the BBR F-Zero bike…
@angele4919 Жыл бұрын
So I’m having trouble starting my engine it putts and then turns off any idea what it can be?
@jamesshawger10832 ай бұрын
Could u put a 80cc jug and cylinder head on a 1 piece 100cc motor
@larryshaver3568 Жыл бұрын
when you put the gas tank on the rear carrier rack what di you use as fuel line?
@martinsveidemanis653211 ай бұрын
Tony, I enjoy that bit of theatrical art in your performance out here (there :), thx a lot, I'm just putting together my first this ebay bought item that stood alone for a couple of years, but.. that's a whole another story, anyways, I feel we are in same latitudes geographycaly despite the continents that we have born on. I like your image that you're building your channel - that's a way to go!! Offtoppic, I got her started with help of brake cleaner direct injection into carburetor, she stood still for an hour or two idling while I was watching her in thermo (infra red) camera to follow temperature... bla bla bla, we could talk all night long, one thing I can tell you - I allready have a whole A4 paper of wish list of what improvements have to be made to this girl ( so you, americans, call them, or am I wrong?). Looking for tomorrow to ride it for the first time, this evening just ~2h idling.
@simongowan984510 ай бұрын
Wood love see if 80cc or 100cc head can fit mini Moto engine
@disloyalpick Жыл бұрын
is it possible to add a kickstart like a real motorcycle has? i heard the pull start usually blocks the pedals from rotating. i would love to see a kick start that springs out of the way when it isnt in use as to not block the pedals so you can still pedal your bike.
@armandoregalado1223 Жыл бұрын
We need all those things you mentioned about the 100 cc 😂
@steliosrc1414 Жыл бұрын
Please make an expansion chamber for the hundred pls everyone in Australia has the hundreds and we all want expression Chambers❤
@tonytaylor5087 Жыл бұрын
Well awesome! Good to know!
@austinallen9398 Жыл бұрын
With out a doubt I'd be looking into to 80/100 if it's aftermarket was as large as the 66/80
@choppercam01 Жыл бұрын
I'm new to the motorised push bike world but have found building my first really easy. I have as much mechanical knowledge as a flea 🤣 however I have found issues not with the build but the uk government won't let me ride mine on the road with the engine running as to them it's now a motorbike and not a push bike, so mine could be the first push bike registered as a motorbike 🤣 but so far I've taken it through some fields and I love it, best fun I've had since being sober 😂
@thfpv4974 Жыл бұрын
Congrats on being sober 💪💪
@choppercam01 Жыл бұрын
@@thfpv4974 thanks 5 and a half yrs now and I don't miss it. Haven't saved any money though as it all goes on mountain bike parts 🤣
@tonytaylor5087 Жыл бұрын
I hear you! And congratulations on sobriety! Proud of you!
@thfpv4974 Жыл бұрын
@@choppercam01 that's awesome 👌iv got 4 years August 18th
@mattyr.4328 Жыл бұрын
I,m live on the UK,never had problems with use a engine bike.If you drive sensible.
@paulbass5955 Жыл бұрын
Absolutely make it a 2 piece and allow for more tunning options
@misfits1279 Жыл бұрын
How should I mod the expansion chamber to fit it hits the peddle start
@metal-lm6ue4 ай бұрын
1 piece jugs leave less chance of air leaks and compression loss
@coreyerwin2536 Жыл бұрын
How about putting a smogpump on it for more power, have not seen it yet. 🤔
@user-qr5vb3vm6e3 ай бұрын
I have a new 66 cc . It needs a kick or a pull starter.
@shorty420musselman5 Жыл бұрын
I have a new 100cc bbr tuning engine, I like it so far. Still breaking it in and would love to see what kind of high performance parts you could come up with. Maybe some kind of enhanced throttle to get it to go more when you twist it back. Also have 80cc broke in motor but wanted more top end. Idk keep up the good work love the video's. Very informative. Thanks
@izaakturner Жыл бұрын
Hey can i fit this to bmx?
@drohrstestes Жыл бұрын
Yes. A 2 piece head and barrel would be awesome because of upgradability.
@tonytaylor5087 Жыл бұрын
Totally!
@ELISRACINGTEAM Жыл бұрын
Good vídeo
@jessiepaulin675 Жыл бұрын
I literally just bought 2 of them 80/100.
@donnieparrish3312 Жыл бұрын
So how hard to build out of the box on a scale from 1 to 10???
@unomossstallion Жыл бұрын
I've done 3 of these installs 2 80s and the third the one I just did a 100 all three for myself I like the bikes there fun the 80s everything went smoothly got good service outta them but for some unknown reason my 3rd the 100 I'm having a heck of a time and the the vibration leaves my hand numb after a few miles heck I rattled off a brand new set of mirrors first time out (didn't really like them anyway) itsa 29inch gennis aluminum cruzer frame the first 2 80s where 26 steal cruzers do you think the larger aluminum frame is the vibe problem I'm not even through the 2nd tank of fuel and I've picked up se good info from your video that going to apply before I pass judgem e nt on the 100 but it is given me a hard time any input ..anybody .
@stanleytaylor6739 Жыл бұрын
I only run the 100cc, I'm a big guy. So some pro parts would be nice.
@Fixoldstuff Жыл бұрын
make some 100cc performnce parts
@jobesummerson9364 Жыл бұрын
We mood more 2 piece kits
@isaiahriley2484 Жыл бұрын
I have the 100c engine but my mounts had snapped off and I’ve had the hardest time to find the right mounts that fit my bike can anyone help me please?
@unomossstallion Жыл бұрын
Make them.
@larryshaver3568 Жыл бұрын
i definitely think the 80/100 should have a 2 piece head
@haltollerud359 Жыл бұрын
I ive in a mountain town, and there obviously a lot of hills to go up and down, I got the 100cc motor with my kit hoping it would be enough to get me up these hill, I guess when I put it all together I will find out, first thing I will do of course is a test run. Anyway before I get that far, any suggestions on motor or whatnot?
@jamessberna1330 Жыл бұрын
Any update? I put an 80cc on an occ chopper bicycle to go to work but there is a big hill and just not enough power in the 80cc.
@jasonsierchio1167 Жыл бұрын
MOAR MODS!!! PLEASE!!!
@barrycrews6186 Жыл бұрын
I like the 100 cc
@gunbuster333SMSTI Жыл бұрын
do you guys carry bike gas kits for someone who needs an engine pulling 300lbs and i found one on amazon that's 100cc for about 100$. that's honestly all aI have to spend atm!! I'm 19 and if it comes to assembally I can do it(i think it's fun to tinker) but everywhere else I Look the lowest price is 180$. I only need a motor to fit my beginner MTB GT.(I've been using it for the past several years.) E-bike kits are too expensive so I thought I'd go gas since they lasmuch longer in terms of distance anyways! Atleast that's what I read... Please someone let me know!!!
@gunbuster333SMSTI Жыл бұрын
also speed i'm lookig for is a simple 25-30 if it does more thats kool. but i probab;y wont use it unless im going uphill lol
@davegoalman6287 Жыл бұрын
Just make a v twin like a harley man
@JRodAllen4 ай бұрын
Do you need a driver license in order to ride this
@jamesmower1852 Жыл бұрын
And I don't know what you guys are measuring but that is no 40 mm nowhere near
@honesttoolreviews644410 ай бұрын
Didn't actually see a sit-down with the 100 ...?
@ignaciosalazar5713 Жыл бұрын
👍👍👍👍👍👍👍👍❤
@Altie810 ай бұрын
Yè
@adognamedbird Жыл бұрын
Get calipers. Chinese just slap a 66/80cc sticker on the name and bam. If you want to actually know what size, then measure it 😂. Bikeberry definitely isn't the beezknees 😂
@cheri758Ай бұрын
Yeah all cool and stiff but your bike berry stage engines are doo doo nothing changed besides the head and air filter and red wire on stock cdi bruh
@DavidAltman-yq8cv10 ай бұрын
Should be two pice
@SaladTossBoss5 ай бұрын
I just bought a used motorized bike with a BBR engine... I want to but after market parts how do I find out which motor I own?
@hobodavid47344 ай бұрын
(())(()) GREETINGS 2 YOU AND YOURS FROM THE NORTHWESTERN WASHINGTON UNITED STATES 🇺🇸 I HAVE A QUESTION ( ? ) CAN THE 80cc FIT ON A 2 0 1 5 SANTA CRUZ BLUR CLASSIC BICYCLE FRAME ( ? )
@shithead Жыл бұрын
I want all the parts you can throw at me for these bikes