Comparing 5 Different Cable Kits - Can Cheap Be Good?

Let's compare five different Amazon cable extension kits and see which ones are good and which are trash. Links below!
Asiahorse: amzn.to/3d9rSfN
Funtin: amzn.to/38Wnhu8
Antec: amzn.to/3d4E1Ti
UpHere: amzn.to/2WndGtI
LinkUp: amzn.to/390KXxw
Follow me on Twitter! @BPS_Customs
Support the channel through the merch store: www.BPSCustoms.com
#Extensions #GetPimped
My Gear List:
CAMERAS -
Sony A7 III: amzn.to/2K65VCS
Sony a6400: amzn.to/2tkqnJk
Sony RX-100 VII: amzn.to/2SHdfbW
LENSES -
Sony 24-70 f/2.8 GM: amzn.to/2th8xai
Sony FE 50mm f/1.8: amzn.to/2I2OUUW
Sony Zeiss 16-35 f/4: amzn.to/2LgobXp
Tamron 28-75 f/2.8: amzn.to/2MLKkzQ
AUDIO -
Sennheiser MKE600 Shotgun Mic: amzn.to/2qBE5kM
Saramonic RX9/TX9 Wireless Lav: amzn.to/2ML6Cl7
Rode NT1A Condenser Mic: amzn.to/2lFy0Te
Focusrite Scarlett 2i2 Audio Interface: amzn.to/2qbLNpX
TRIPODS & OTHER STUFF -
Dracast LED Lights: amzn.to/2tmmIqL
Benro S7 Tripod: amzn.to/2ym9kJ9
Manfrotto 502AH Fluid Head: amzn.to/2CGIs56
3Pod Orbit 4 Section Carbon Fiber Tripod: amzn.to/2eqlNkR
Manfrotto Be Free CF: amzn.to/2sCIf2a
Neewer C-Stands: amzn.to/36h2qRI
Production music courtesy of www.epidemicsound.com

[@methodmantis3060]

I'm new into building my own gaming PC and am currently in the stage of finding out all I can about the various ways to further customize my build, so naturally I'm in the market for sleeved cables. As someone with next to no knowledge on the subject I really appreciate your video and all the information you provide in it. Thank you very much!

[@beemo1579]

Awesome video man. Really appreciate you doing this. Love to see similar content on other small aesthetic things you can do. Fans, sata cables, USB extensions, etc. I love what cable extensions can do for a build even as low as $500 for such a small buy in.

[@NinjAsylum]

I picked up that same Link-UP braided set a few months ago, and havent regretted it. They're perfect.

[@pluto6514]

@Jason Luong 20cm I'm pretty sure

[@SlightlyMiscalculated]

I've had the uphere kit for a year now, they're pretty great. I like how when I have all LED's off they match my glossy white fans, and with LED's on they reflect the colors beautifully. Over time they stiffen up, so using the cable combs to get the right curves until then is essential. Overall I highly recommend for a cheap way to make your build shine.

[@mikeoleksa]

I've used Ensourced cables from Joey ever since you recommended them and him to me a couple of years ago. There's a premium cost, but oh so nice! I also use the modular PSU cables, not just extensions. I guess it's a vanity thing. I even have a set sitting here to go in my TT Level 20 HT build that I've been procrastinating about putting in. After seeing the LinkUp cables I might be making a modification to them before doing so.

[@Kelekona_808]

Solid video Brian. First time I've seen someone recommend specific brands or extensions for specific build needs. This should be helpful for a bunch of people out there looking to spice up their rigs.

[@Elminster_The_Wizard]

After using every kit, I enjoy them all. I have yet to have any of the options listed fail in any build. In 38 builds, they all work, feel, and look just as good as the $100 custom kits.

[@harvelein]

Good to hear, felt bad for ordering a 24$ no name kit on amazon for my 1800$ build :D

[@marcsclip]

@@harvelein hey man, ain't no shame in that!

[@mikerzisu9508]

@@harvelein putting a lot of faith into cheap cables that can destroy your components. Not worth it.

[@harvelein]

@@mikerzisu9508 yea thx but they're running great

[@mikerzisu9508]

@@harvelein good to hear that, but I don't understand the logic behind buying all of that expensive hardware and then going dirt cheap on the components that supply power. Makes no sense to me at all.

[@SirNickyT]

Finally! I've been waiting for this video literally for months. I can't pick a custom sleeve company lol. Thank you!

[@danejerustv]

I got the ones from uphere a while back. They definitely are a bit hard to manipulate and get to play nice but once you work them out to where you want them, I think they look fantastic.

[@TheTapode]

I really loved this cable review. I do hope that you do keep this segment up. Off this topic but are you going to review the EK Loop Connect? If not can I ask you some questions about it?

[@marblevoyager6327]

Thanks for the help with this!!! Great content please keep up the good work

[@Jeff_M42]

Ensourced is my go-to, Joey does amazing work and has my favorite selection of colors and patterns for my tastes. His cables always look amazing in your builds too

[@JeremyArchie]

I use Cablemod for the 'buy it' option, and V1 Tech for the 'custom' option. Had no issues with either.

[@currentlykent4593]

Cablemod in my wife’s PC (extensions). Full cablemod in my PC. Asia horse in my daughter’s PC. For the price, Asia horse is a really good option.

[@vortraz2054]

I would be worried about wether or not it can maintain a stable current. But Im just cynical and slow to trust. I love every corsair component or input device iv ever used and Im still on the fence about them because of icue

[@currentlykent4593]

Feel free to worry about what you want, but they are wires inside.

[@vortraz2054]

@@currentlykent4593 Its not that simple. Consult an electrician for details I have stuff to do.

[@currentlykent4593]

Vortraz like messaging me to consult an electrician? Time well spent. Don’t you think if they didn’t carry the proper current, no one would buy them?

[@vortraz2054]

@@currentlykent4593 If people knew what they were buying apple wouldnt be a billion dollar company

[@Arashmickey]

Linkup won me over too, their metallic cables look especially fine and many of them are sold out currently. Also, they sell Ryzen set that has an extra EPS 8-pin CPU cable for some of the 2x8-pin mobos.

[@FabienBoulay]

Ok got a set of those UpLink in white and was really pleased with the quality and look.

[@Bogside_Irish]

Thanks for doing stuff besides Case/CPU/GPU (appreciate those) reviews and testing. Looking to either buy Extensions or shell out $140 US for a new PSU, Guess I'll buy extensions this year hahaha.

[@braxatikus3640]

Nice vid. I'm digging the LinkUp cables

[@ferozbawa8639]

I'm using the cooler master sleeved cables and in my opinion they really great. Not very flexible but does the job nicely.

[@merwinpique]

Just ordered them. They were 20 euros. Can't wait to try them.

[@andyyoung5050]

Good video. I have used just about all of them Besides the linkup. My go to for my prebuilts is the AsiaHorse as I find them excellent to train. I custom sleeve my more intense builds.

[@christenlanger]

I ordered mine from a local hobbyist. It's indeed a bit more expensive but worth the price (about $50 for a full set). I do wish I have options other than the usual available in our local market without shipping (Thermaltake, Phanteks, Bitfenix, etc.).

[@whiskeredgundam7765]

I have been using a set of the asiahorse cables for a year or so and they look great and I have had no problem at all with them. I would recommend them. I am going to check out a set of those braided ones though. they look good.

[@Matthew_Lang]

I got some Cable Mod extensions from Micro Center in black and red. Not a huge fan of the clear combs, but it was nice that they were at least included. I have ordered black cable combs to replace them with, but I am waiting to do other upgrades before I install them (Not taking the system down just for cable combs). Overall I am rather satisfied with my purchase, and would purchase them again.

[@justinforeman7714]

I seriously just ordered 2 sets of extensions. I got a kit from LinkUp that are very cool. The braided 24pin is awesome. But I found another brand Aquiein that you didnt mention. I havent got them yet but Im curious to see how they work out. I should recieve them today and Im very excited to get them in my build.

[@269bp]

Did bought the LinkUp cables in Orange & black for my son’s PC and they are really tough to bend to shape. Yes they are cheaper but i prefer the cablemods, way more easy to loop and bend in thight cases.

[@GetRexxd]

i got worried when i bought the linkup ones because ive heard horror stories of cheap cables not being the AWG they were supposed to be and frying systems. So i took the extra LinkUp cable i had and cut the sleeving off and they are indeed actually 18awg and can handle 600 watts. Linkup is the real deal for cheap cables.

[@MutazGazzaztazeps]

Thanks bruh :) this was really helpful as i'm building a PC now. really wished to see the combs though but I suppose the store listing will suffice

[@powerobxxx]

I have a set of uphere extensions (white) and they are 16 gauge, pure white and look extremely good, I am almost OCD with cabling and they work well for me with a quite large Thermaltake P90 case

[@duncandonuts5268]

I'm debating between getting the popular Asiahorse cables versus Phanteks ones. My case is Phanteks, so it would add some consistancy.

[@josephcox2214]

Used the white asiahorse cables work and look great in my white build.

[@dans79vet]

I used EZDIY-FAB 300mm kit (32€ Amazon France.) Black and white with black plugs and combs. Kit had 24pin, 4+4eps, 2x8 and 2x6 pcie. Nylon feel sleeve with medium level of flexibility. Not good for tight turns but holds shape reasonably well. No idea wire size.

[@seemslegit6203]

I've just used these too. They are hella stiff but can be forced into shape reasonably well and hold it afterwards, the combs fit tightly too. I've seen them on sale in both 16 and 18 gauge. I got 18s, and needed 2 packs because my GPU has 3 connectors and mobo has 2.

[@shadowzedge5793]

IMO I like to have as few electrical connections as I can. So with that said I will either get a custom set or make my own that goes directly from the PSU to the device(s).

[@sillybillymemes]

bought the Antec one today, they looked alright I hope it arrives with cable combs.

[@greghum4754]

Any updates? Did they come with cable combs?

[@sillybillymemes]

@@greghum4754 yes they did, there are plenty of combs, more than what I actually used

[@claycolbert7720]

I have been eyeballing the asiahorse cables for a while thanks for this review

[@Kelekona_808]

Have the white set in a white build. They are solid for a white build, but if you look at the cables up close the colors may not be exactly the same between cables. Not something you can notice in a case with RGB blasting constantly.

[@claycolbert7720]

@@Kelekona_808 yeah my build is rgb full just wanting to reduce basic cables

[@VicJuarez88]

Hey guys.what do you think about the corsair premium cable kit?

[@CB27]

Nice video. Now if you could measure voltage drop with each one, that would be perfect. Using extension cables sometimes results in unacceptable voltage drops at the motherboard or GPU end which leads to instability and crashes while e.g. gaming. The culprit is usually high resistance at the connectors due to insufficient conductor contact. No good having a nice looking PC if you can't use it.

[@Pointless-VIDkid]

Thank you so much this video has helped me so much!

[@HiCZoK]

What do you think about phanteks extensions?

[@Elchameau504]

Hello i know its an old video but my friend bought one of those kits since his psu cable are too hard to work around he has a big 7900xtx asus tuf which is massive and i wonder if its ok to use those extension on it since its a 350+ watt gpu and some people say it can only provide 100 watts per cable, i do know pci express gives around 75 watt with 3x100 it would be 375, no margin of error

[@SHADOSTRYKR]

Any opinions on FormulaMod? Seemed to be Funtin pricing but higher reviewed with more color options.

[@SJSOmar]

Is their a difference in gauge like 16 and 18 it’s my first time modifying my pc I bought from someone who built it and want to get rid of the ketchup and mustard cables from the psu 24pin 500 w psu to a asrock b450m steel legend

[@bullshark9177]

Very useful, thanks!

[@JESSIECOJC]

I don’t have any but I am thinking of getting some extensions this year!

[@ccgert]

My two boys and myself all have custom made cable extension kits from Ensourced. They are the best.

[@lunabird1453]

I’m sorry but I can’t help it- *My two boys and I

[@0zzy_0]

And what about performace they say with extension cable you get lower performance

[@ccgert]

@@0zzy_0 No performance loss

[@Nick-hu1ck]

Out here doing god's work, thank you sir.

[@osamah.mohamed3629]

Does Aisahorse work properly with my PSU "Corsair AX860i" as some are saying it's differ from power to others & I have to check if compatible or nor

[@scarkillerful]

Well your PSUs capacity doesn't matter, it's what power you're actually pulling. If, however, you are pulling all 860 watts, then it's probably better to go with a 16 AWG cable (slightly thicker) compared to 18 AWG. But even then, it's unlikely to cause problems, it'll only introduce a bit more resistance and heat loss as a result. However, this is only at max load, and it's unlikely that you are pulling max load 24/7 (crypto miners, looking at you), so again likely not a problem.

[@D3spairFacTor90]

Great video, thank you!

[@noahramos1768]

Wow....thanks...I only ever bought through cablemod

[@StampedePC]

I had a white Asia horse set the cables kept popping out of the 24 pin I out them back in computer refused to boot tried the extensions on my GPU with my normal 24 pin and it worked fine I messed with them for a bit but without the 24 pin to match I ended up returning them and didn't bother getting another set

[@OlettaLiano]

I bought a set of Asiahorse extensions and they're pretty good for the price.

[@BPSCustoms]

For sure

[@OlettaLiano]

@@BPSCustoms I also have a 6-pack of Asiahorse Solar ECLIPSEIII 120mm ARGB fans that came with a ten fan hub and a remote control for about $55. I have them mounted to my 2 360mm radiators and they work great. Love your channel.

[@danielnordstrand6443]

The stiffer cables from upHere are really stiff because their material is PET plastic "fabric". At least according to Bitwit (youtuber). Good for shaping though? ;). Also, funny the AsiaHorse cables made from PET in Bitwits video were super stiff... But another more recent reviewer also had very flexible. Maybe their new manufacturing is consistently flexible.. I need to get flexible cables for my small form factor build, makes me worried to order these... Antec using PET but still reasonably flexible... better quality than other PET mad cables? Thanks for the great review! Just what i need right now!

[@Alex-oq8yg]

Got ones from AliExpress (20cm white) and they look really good the cables are exactly the same length and they are quiet high quality for just 12 bucks (with shipping)

[@Shvraz]

Have they held up?

[@Alex-oq8yg]

@@Shvraz yea no issues so far, i mean they are just cables there is no special premium production process to justify 60$

[@Shvraz]

@@Alex-oq8yg yeah I figured. Just ordered white ones from AliExpress a week ago for $19 cad. Just wondered with the price so low if it would cause shorts and possibly fry a component. Thanks for your reply btw.

[@justaballofnothing4056]

he starts reviewing at 2:52 for those who don't want to sit through the intro

[@darrendavies1102]

Thank you for your time...

[@SteveL11]

You guys know any cable that can completely replace my original cable instead of extension? I have a Corsair RMx 850.

[@VanilloBumbleboo1981]

This should have you covered. Not cheap though. www.caseking.de/search?sSearch=modmesh

[@koreanqueen399]

i am planning on get the LinkUp extension cable , i am a bit afraid of using them with my 3080ti i do not wanna put it on risk so my question is, are they completely safe and does it affect the performance at alll ?

[@dac33nr58]

They are tinned and UL rated can and take up to 1200 watts your 3080ti is no where near that at max 350 to 400, even if you had a RTX 4090. If your concerned get Oxygen Free Copper (OFC) Teflon or 16 awg tinned LOL.

[@koreanqueen399]

@@dac33nr58 lol yeah after looking and reading on redit i decided to get them and i havent had any issues even with oc. ty for the reply

[@xt3100]

i bought some from Ensourced, he was very friendly and answered my questions and worries, he made so many custom length cables that was perfect for my build. If i did not get them i wouldn't have fit everything in my PC case.

[@BPSCustoms]

Joey is a great dude

[@xt3100]

@@BPSCustoms indeed, he even made a split molex connector. One was at least 2x the length of the other one.

[@pperentes]

Why dont any of the kits come with 2 4x4 eps for motherboards that have 12 pin connectors?

[@MedwayAerial]

A single 8 pin is all you need , the other 4 pin is only useful for extreme overclocking, possible future use , motherboard manufacturers continue to add extra cpu connections even though there ìs no need

[@Lishtenbird]

@@MedwayAerial Doesn't change the fact that you'll be left with an empty connector in a case that's supposed to look great.

[@akakerness6396]

I'm losing my mind over 16 AWG from my PSU and the 18 AWG from the custom cables. I've read various forums where people answer in a way that they don't really answer anything. So can someone please help me? With a simple yes or no, I don't need a person telling me all about the use of AWG and what it does and what the future of it holds. Just YES or NO, Is there a problem if I use a 18 AWG cables if my PSU says 16 AWG?

[@GoosemanSG]

Awesome Review

[@Zefram0911]

I have the Asiahorse set. cheaper way to spruce up a system.

[@doctormanhattan653]

You do not mention one of the most important data of a custom cable, the AWG, which can be 16 or 18, being the best 16, like Antec.

[@kevinzyrkowski]

I think I’ll go with CableMod, pricey but the best you can get!

[@Return_To_Sender]

Nah. Mod one or ensourced is the way to go. Even cablemod pros aren't as good as ensourced.

[@currentlykent4593]

Their factory is behind on orders right now. If you want them, you’ll be at the end of a pretty long cue. Well... at least behind me😂

[@joseavila2451]

I just got the antec ones they are pretty stiff I’d go for asiahorse

[@dennissmith1435]

Cablemod has different kits based on the PSU you're using. Is that an issue with these more generic kits? I'm not sure why Cablemod would have a "compatibiliy" list for PSUs if they are pretty generic.

[@scarkillerful]

If you're buying an extension kit (like these cables), then your PSU doesn't matter. If you are buying a full set (which these aren't), then compatibility matters, due to the ports on each different PSU being slightly different. So it's not about them being "generic", it's because they aren't replacing your PSU cables, they're only extending them. So pay close attention to what exactly you are ordering on CableMod. To try and explain it in another way: Think about it as if they are extending the ports on your components, not as if they are extending your PSU cables. It's a weird analogy, but it makes it obvious that if you have a certain port on your component, then your current PSU cables will always fit the cable extensions (provided they had fit the components directly beforehand).

[@jeremyatienza1676]

If you're self distancing, now is the perfect time to pick up a good hobby... sleeving your own cables! The length and fit will be cleaner, the cost will be cheaper, and time will pass quickly. 16 awg for that thicccness and efficiency

[@ScytheNoire]

No. I've done this before and it was not fun. I'll just pay to get it done for me. :)

[@xt3100]

@@ScytheNoire depends on the person then too.

[@reinerrekadobisara2586]

is it safe? i wanna make one.

[@akira8817]

Do you have a tutorial link? And what parts etc?

[@karlcorrz]

Whats the difference between 16awg and 18awg?

[@RodrigoSantos-qh7se]

Cable extensions are way too expensive in Brazil. They're also hard to come by.

[@tigerbalm666]

Update: Ventroo set for $10 works great! Feels premium and I don't know hwy anyone woudl pay more than $15 a set!

[@tigerbalm666]

I just ordered Vetroo.

[@0zzy_0]

And what about performace they say with extension cable you get lower performance

[@JuxZeil]

Even cheaper sleeving the cables yourself. 😉

[@ShutUpAndListen79]

Why don't they make the cables connect direct to the power supply?

[@elvisbest3213]

how long is it from the 24 connector on the MB through the back and directly to the PSU? cause i don't like the extension where you have to add on

[@evanl3985]

Is 4+4 pin EPS cpu?

[@nickusername6699]

thanks

[@tigerbalm666]

I want som corn rows style...

[@MijIsMe]

are psu cable extensions compatible with any psu?

[@Lishtenbird]

They *extend* cables, thus they clip onto the same respective cables of any standard PSU (6-pin PCIE onto 6-pin, etc.).

[@smithman013]

Where can I get 3x8 pin cables for my gpu? All these have two. Lol!

[@Ruuubi]

LinkUp sells them as a 5 pack (1x24p, 2x CPU, 2x GPU) or 6 pack with one extra 8pin for the GPU. They also sell single cables.

[@smithman013]

@@Ruuubi I just got bough a Asia Horse triple back. They work great ! Thanks for your suggestion 😊

[@n8n8n8n]

I've heard that these cheap cables melt, is thattrue?

[@RAW_Reality]

That braided look with the LED Streamers would be like putting your retinas on the "puree" setting. 🤪

[@infoforanything6496]

Why are these cables not being pre Combes such a big deal, lmfao it only takes like 3 seconds to put 3 cable combs on it ?

[@tristonm37]

I make amazing cables!!! Clients words, not mine. I even do hand lacing when requested. Thanks for a great informative video!!!

[@miguela.wilder6533]

No Corsair?

[@ItssMitch]

Corsair doesn't do cheap cables

[@dr-elite4272]

The link up cables I ordered were incredibly badly braided and looked nothing like the ones in your video sadly

[@realash]

guys for the love of god before you buy cable do a check buy the case and setup the motherboard and estimate the length of each of these cables before you purchase them.

[@weliveforvacations5203]

I don't want extensions. I want quality cables from the device to the PSU. Why is that not a thing???

[@hill160881]

I just used some cablemod extensions and two wires came out of the plugs. They are junk.

[@Worxthy]

Should I get Asia or Linkup

[@Hexavelli]

which one did you get ?

[@Worxthy]

@@Hexavelli asia, they’re great, don’t regret it one bit

[@GabbyTech]

I want those LED panels ;D

[@yoyigu]

AsiaHorse Ftw

[@michaelhall8587]

Any 2024'ers watching this video, heads up, #1 and #2 has dropped in price quite a bit!

[@BANIAAAAK]

Old video but i just bought ASIAHORSE ones

[@MrEditsCinema]

I have the money..I just know that spending £100+ on cable extensions is stupid..

[@scarkillerful]

Full cables or cable extensions? These are all at or under £30 buddy.

[@londonbell9298]

YOU ORDERED AND RECEIVED IN 1 DAY BECAUSE YOU LIVE IN USA, BUT IF YOU LIVE IN SOUTH AMERICA IS CHEAPER IF YOU USE AN ASIAN DELIVER, BUT I"LL SEE THE VIDEO TILL THE END.

[@scarkillerful]

THANK YOU FOR YOUR VALUABLE AND KNOWLEDGEABLE INPUT. WE WOULD HAVE NEVER KNOWN UNLESS YOU SPOKE LIKE THIS.

[@maurxce_0416]

i bought antec cable extensions and they are terrible. the dont fit dont matter how much i wiggle or press. waist of 30€

[@ST0N3D]

Anything but antec lmao

[@noahramos1768]

Never really thought to look on Amazon.....I feel really stupid *facepalm*

[@Leowulfs]

Poggers!

[@tigerbalm666]

Your number rating doesn't make sense! Use letters liek A, B+ , or F, etc. Wut does "5" mean? Funtin are $13 BTW...

[@vinylmonster4907]

again what with the extensions, why not just replace the cables for modular PSU's with full length cables NOT EXTENSIONS?