TCI® Quick Tech Video: Programming The TCI® EZ-TCU™ By FAST™

For computer-controlled transmissions, nothing beats the TCI® EZ-TCU™ by FAST™. Compatible with most GM transmissions, it is configured to run right out of the box. In this video the group at Power Automedia walks users through the Setup Wizard & Advance Options, as well as Common Tuning Options for the revolutionary unit.

[@Compcams1976]

Thanks for watching! We actually don't have anything part numbered for that application, but if you call the tech help line at 888-776-9824 we may be able to build a custom component.

[@Compcams1976]

You may want to increase the low speed shift point (found in the advanced settings) by a couple of mph. The WOT shifting will not be affected. Thank you.

[@bax442]

Do you provide any examples of how a car should be set up? How cars with the transmission as stock would have it?

[@daldrickwhite9067]

I have a question about thr the TPS SENSOR....does its suppose to show a signal ....the circle besides the tps suppose to habe a check mark?

[@ATCRyderX]

Very easy and to the point! Do you guys make anything for Chrysler's 3.5HO V6?

[@donadamson2668]

Im confused about the PPM setting, I have a 4L65E trans and a Dakota Digital dash, what is the setting?

[@josenatividadvelazquez9927]

Q tolva lleva para cubrir la turvina y cremallers

[@Mforxzagarcia]

What if I installed a transgo HD2 shift kit in a 4l60e is it a good or bad idea????

[@kennytrump6275]

need help hooking up my TCI EZ-TCU trans. controller in my 97 Trans Am have a 4L60E am i gonna half to buy a remote TPS unit now so i can hook up the TPS signal are will i not need to use the TPS sensor

[@TCIAutomotive]

We recommend you contact our tech line at 888-776-9824

[@josenatividadvelazquez9927]

Q tolba yeva para cubrir cremallera y turvina

[@d3d3eh]

I have the TCI® EZ-TCU in my car that controlled the 4l80e after that I installed tci low ratio, Low Gear Planetary 1st&2 Does I need to retune it or leave it ? I notice it shift early before the shift point set

[@AngelFernandez-xt3kb]

Does it work on a carburated LS?

[@chrishansen7004]

That's kinda what it's meant for

[@lilsadboy69]

What if I’m running carburetor

[@frankdatank7751]

check out my vid, you can use a holley tps bracket and a tps adapter so that you can use it on the gm tps easy money

[@allotoi7777777]

That's what it mean for

[@jonathanpalahitski9596]

Can I use this with a 2010 gm 6L80E

[@poontsunami1114]

Does this fit on a 4t65?

[@justynsudyka6793]

Can this be used in fully automatic shifting and in manual shifting?

[@TCIAutomotive]

Yes, it will work fully automatic like a factory application. There is also an input that can be activated on the TCU to put it into a full manual mode for racing use. Hope this helps, thanks for watching!

[@justynsudyka6793]

Thank you for the quick response.

[@natedime5032]

How much

[@fuckjoebiden5783]

Keep getting COMM ERROR, so far has not worked at all, 700.00 down the toilet and no returns, Im thinking a lawsuit in the making.

[@duanehammonds5376]

Have same problem, terrible customer service.

[@bigsmiggle242]

I wanna do this but don’t wanna blow up my engine lmao