Complete Interior LED Kit for Jeep WJ Grand Cheroke from Najaroffroad.com

[@NajarOffroad]

You can find the Interior LED complete Kit here - najaroffroad.com/products/interior-light-kit-jeep-wj

[@tremendez758]

Do you know if you’ll ever get it restocked ? It said you’re sold out

[@andrewhart9663]

What about a light for the gear shift that illuminates the gear you are in?

[@thereich9967]

I did a LED swap on my 2004 WJ.. didn't need to add a load resistor. Works fine with no issues. Typically don't need them unless newer, German, or on a brake or blinker bulb.

[@nohandlexyz]

Just started looking into swapping my backup lites to LED on my 2003. Do you need a load resistor for those?

[@GoldyCraft79]

YESS SIR THIS IS WHAT I’M TALKING ABOUT!!!

[@NajarOffroad]

🤟

[@jesusmoya9803]

I just installed mine, Hugeeee difference!!! Thanks Najar for the sticker too it is now rocking on my rear window.

[@NajarOffroad]

Awesome man! Thanks for supporting 🤟

[@todd-617]

You should look into using "T" connectors on the wiring. They are a little easier to use, cleaner looking install, and you can disconnect the resister if you need to replace it without affecting the wiring. I just bought a few hundred of them for $8. Good looking interior light upgrade. I'll probably order a kit from you.

[@NajarOffroad]

Great idea! That what I used in my headlights for the DRL lights. I’ll look into upgrade the connectors to those👌

[@fayceoff]

Do you have a link to what type connector you're talking about?

[@jdsrcs8061]

What up Najat!?!?! I just got my kit today. I have one question to ask for clarification. So I am planning on only replacing the overhead lights fronts, rear passanger, and cargo. So I do not need to install the load resistor correct???

[@NajarOffroad]

You should. You can run without it but the rear passenger will strobe

[@owenr1729]

I have an 04, After this video i’m definitely picking these up and the gauge cluster lights, Keep up the amazing content i love it

[@nicholasmarcombe4975]

I installed leds in the cab last week and it is a night and day difference in my wj

[@NajarOffroad]

Nice! Yea crazy how much difference it makes! Haha have to carry sunscreen 😂

[@xtroy.b]

Maaaan you weren't kidding about that glovebox light being a pain!! I got the old one out by breaking it accidentally with pliers and then luckily having a wire from the bulb left to be able to pull it out lol. Getting the new bulb in took like 30 mins of fumbling and then getting those damn plastic D shaped things back in took forever!! Everything else was a breeze though lol, even the load resistor. So glad I finally got around to installing these, thank you man!

[@lipton-mx8yk]

how did u put the d things back in i can’t figure it out?

[@xtroy.b]

@@lipton-mx8yk they go completely straight up which I did not expect, there are little slots where you can feel the side slide into and then you just push straight up

[@Seatown12s]

Just got em in today...was super easy and made it soooo bright... pictures later tonight

[@ftochris965]

Just put mine on today.This was long overdue on my Jeep lol thanks man great video

[@paulscomedyclips]

I finally did mine!! It looks BEAUTIFUL! I can see!

[@NajarOffroad]

Right! Big difference

[@stevenschulte8074]

Quality content as always

[@NajarOffroad]

Thanks brotha! Can’t wait to see them installed in your Jeep! Your monthly Package will be shipped soon💪

[@justinfay3011]

Can you make a video about the climate control and the switches on the doors and how to replace the lights in those? I was thinking about getting your dashboard kit but can’t find a good video about the climate or door switches lights either, since your kit includes climate control lights as well. Maybe you could do one about the lights near near the gear shifter as well

[@NajarOffroad]

Yea I’m actually going to be uploading a video about the dash and climate control tomorrow 👌 as for the door switches I don’t think I will do shift I’m going to try to do those as well!

[@robert4941]

I replaced ALL of the bulbs my 94 G.C. Laredo and the only place I had to put the resistors was for the turn signals to eliminate the hyper flash. Also Did Not use the resistor for the interior lights and had not had a problem. I don't know if being different years made the difference?

[@NajarOffroad]

I think so. If you don’t install it the interior lights stay on very dim for a couple minutes after you lock your Jeep on the WJs

[@bitcoinham4579]

Hey najar do you need more than one load resistor or the one will fix the whole system? Such as license plate and interior. thank you in advance for any help

[@NajarOffroad]

No one is all you need

[@peppermorrison5572]

I have been looking for this video. I have been watching videos for awhile and have been trying to find the resistor to fix the interior lights. Thank you so much. Great Question are the t10 bulbs you have any better than Sylvania? I am just wondering on which ones I should keep in my Jeep.

[@NajarOffroad]

I don’t have any experience with their bulbs but those are 6000k and my T10 are 8000k color temp

[@manofsteel7819]

Yeah I did this to my 00 now rear passenger door lights don’t work. Plus courtesy lights in front doors quit working. Is there a separate fuse for the individual lights? I’m stumped. Haha

[@NajarOffroad]

I would start to check if you are getting 12 volts to the lights

[@markcarpenter3600]

👍 Didn't know about needing a load resistor. I was wondering how it was going to work with the dimmer.

[@NajarOffroad]

Yea it is necessary but they do generate heat so if you’re not comfortable with that I recommend leaving the original footwell lights in place 👌

[@thereich9967]

Never used one on mine and no issues. All bulbs done. In my experience you usually only need a resistor in newer vehicles that are more sensitive, German vehicles like Audi, or on blinkers.

[@markcarpenter3600]

@@thereich9967In a WJ?

[@brianwallace1666]

Man I just changed all my lights...got to the last one at the hatch and looks like a wire must have come loose cuz now it doesn’t work. My wire had no length whatsoever and I tapped into it, hooked up the resistor and nuttin. Hoped it was a malfunctioning LED but put the old like it and nuttin 😭. Guess one day I will get to fixin it.

[@nelsonfigueroa5926]

try lasfit led, i have them and they are extremely bright like double the brightness than those

[@cesarbeg]

Nice clases. Is One resistor enough?

[@NajarOffroad]

I have a new kit on Najaroffroad.com that does not require a resistor👌

[@toku58]

What about the vanity lights on the visors?

[@TheJlosupra]

That was a great video!

[@NajarOffroad]

Thank you! Starting making some on your lawn mower I mean Honda

[@kellobyte1]

Hey bud! My 2002 WJ doesn’t have foot well lights. Did someone remove them or did the Laredo trim not have them?

[@damdevbrog]

Crazy question once you pull the rubber stoppers to get the glovebox off how in the heck do you replace them😂

[@S_Anaya]

Not sure if you figured it out yet. But there is a groove that you slide the T end thru the groove

[@bbmskin_bbmlash]

Okay so I just upgraded mine and for some reason they will not turn off while my cars running? Do you have any idea how to fix

[@bbmskin_bbmlash]

I used exact same lights as in this video too!

[@peppermorrison5572]

Is there a link for just the t10 bulbs somewhere? I was looking for a friend who doesn't have jeep. Oh and I liked the kit. The bulbs you have are brighter than the Sylvania.

[@NajarOffroad]

I suggest going to Flyryde.com for Quality bright bulbs! He sell individually 👌

[@the_flurginator5351]

Can you make a blue led light for the interior And love the video man

[@JohnnyChapo29]

I installed the kit and it made my back seat lights flash

[@NajarOffroad]

Did you install the load resistor?

[@JohnnyChapo29]

@@NajarOffroad yes

[@NajarOffroad]

Message me on Instagram or email so we can see if we can diagnose it

[@JohnnyChapo29]

@@NajarOffroad i messaged you

[@breezy3722]

Once I put these in my 99 wj, they go strobe mode. How do I fix that

[@NajarOffroad]

Did you add the resistor? Message me on Instagram @najaroffroad or email is in the description of the video

[@lp2662]

They strobe in my 01 WJ too, the back door lights specifically. Does the resistor fix that, in the middle of installing them now. Edit: Finished install, with resistor. Back two door lights still strobe when I push them

[@mikehunt874]

I want to do this upgrade on the wj I just bought but one of the dome light clickers is broken. I had to pull the bulb out because i cant click it off. Are these easily replaced or do I need a whole new assembly?? New to jeep life. Thanks

[@peppermorrison5572]

Are you going to sell the bulb for the buttons on the overhead display? Or show where we can order it.

[@NajarOffroad]

Yes sir coming soon 😜

[@martinnovotny9066]

Hi, I am interested in replacing the lights on the air conditioning control panels. Do you have any videos for this? well thank you

[@NajarOffroad]

Yes I do search my dash light video

[@sundancer76]

Check out Martin Built.

[@krisarsov76]

Heyl man the lights for the rear , the metal part is very close to the connection points and it's pretty easy to short them...i adjusted them evenly on both sides so i dont have shortage but if you hit a hole in the road or you have some vibrations the light can get shorted... and something can burn...how do you prevent this?

[@joshuasmith6208]

I NEEDA SET OF THIS LED KIT HOW MUCH INSTALLED?

[@darkwoler]

I got my LEDS about 4 months ago and I love them. But I can't figure out why they keep killing my battery. I thought it might be the battery itself, but the thing is only 7 months old. The LEDS seem to ALWAYS draw power and I do not drive it every day so when I do go to drive it, the battery is dead. Is there something I did wrong or anything I can do to help that, or should I go back to stock?

[@NajarOffroad]

Hmm I haven’t noticed anything like that on my Jeep. I’ve left mine parked for 2 weeks and still started up. If I remember correctly the Jeep after you look it automatically shuts off the power to the interior lights after like a minute or two. I would say do a parasitic draw test to verify what is drawing power. Also hit me up on Instagram or Facebook @najaroffroad I respond there more often and faster

[@gon_a_i]

I changed my interior lights to led but my overhead console lights don't turn off, they are dimly lit when "off" and brighter when on

[@treightonmagnone7884]

Just bought myself a set from you

[@arseniosapatinha2030]

Sir, what is your 4wd system? Is it quadra track I, II or quadra drive?

[@NajarOffroad]

I have selec track

[@buttawaxskateboardin]

Hey i just received my kit! just wondering if i can get away with using the 3M tape on the back of the load resistor rather than drilling holes or do you think it would melt? let me know thanks

[@toddgilliam5296]

Melt

[@jhow3d688]

Have you had an issue where only the bottom floor lights come on with the remote after installing? When I unlock the Jeep with the remote only the floor lights come on (not the dome and ceiling lights). To turn on all of the lights I have to turn the key to the on position. Any ideas?

[@SCTTanielu]

The light in my ash tray has smoke coming from it any idea why ?

[@Alejandro1982Vargas]

Great vid, thanks!

[@NajarOffroad]

Thank you 🤟

[@stvxci6139]

Any blue kit coming soon?

[@ferminvelazquez6108]

@Najaroffroad When will you have more in stock ?

[@NajarOffroad]

About next week

[@duli_hawaii]

When will these kits be back in stock?

[@danielrichardson7377]

I have put the resister in both places you said you could and my lights still do not turn all the way off

[@NajarOffroad]

Hey man message me on Instagram @najaroffroad so we can work it out!

[@jacobijones8304]

I comment a lot lol sorry but my passenger back light button broke so my light stays on I just had to take the bulb out . Is there a way I can fix this if you know ?

[@NajarOffroad]

If you still have the button you have to slide it back on we ended up using a soldering iron to Melt the plastic together. If you don’t hit up a junkyard for the piece

[@jacobijones8304]

@@NajarOffroad the goat ! & one more for now I put new leds in & was driving home & my lights wouldn’t turn off all the way like usual, is that because of the load resister or am I completely wrong

[@NajarOffroad]

Yes sir💯. You don’t have to run it though after you lock your Jeep about 30 seconds to a minute later the Jeep cuts power to the lights so they won’t stay on all night or you can install the resistor and that will take care of it

[@kylewatson999]

Just ordered some💯💯❤❤👍🙏

[@mynamecrispy873]

I opened my ash tray area and i didnt find any lightbulb, i have a 04 grand cherokee laredo 4.0 rwd

[@NajarOffroad]

Really? That’s weird

[@mynamecrispy873]

@@NajarOffroad what do you drive specifically?

[@aaronpodgorski1617]

How do the lights stay on when you open the door an shut.off when you close it?

[@benbirch2393]

Anyone know how I completely remove the rear hatch dome light? I'm trying to reach the wiring behind it. Thanks!

[@alexhernandez-gd8vb]

What about green led dash kit?

[@skiphoward6316]

What's your website

[@adrianalfaro1586]

Yes sir

[@NajarOffroad]

🤟

[@garretthigham]

What about other colors

[@erickdallas1462]

Put the left rear in would not go off

[@NajarOffroad]

Definitely check your switch for that light. That is a common issue that is overlooked.

[@erickdallas1462]

@@NajarOffroad lol that was my issue got them in definitely brighter love them thank you 😁

[@NajarOffroad]

@@erickdallas1462 I'm glad you were able to resolve it! Thanks for supporting the channel! Also another thing with those buttons is if one is messed up it can cause the lights to stay on to! I found that out with the Gold WJ we have haha

[@erickdallas1462]

@@NajarOffroad easy fix just had to watch the video, your welcome!!

[@DanCBoyle]

If you going to show folks how to work on or modify components, you need to learn how to start disconnecting your battery 8n the demo.

[@NajarOffroad]

Sorry will do

[@jeje9621]

9:44

[@cloutgangster]

These Jeep’s get horrible mileage

[@NajarOffroad]

Absolutely

[@cloutgangster]

@@NajarOffroad I barely get 13 miles to the gallon 😂