Computer Tuning? JL Audio's VXi Amplifier! VX600/6i Overview

[@sjgoff]

I've been building systems since the early 90s. This blows my mind.....

[@SoloTheDolo]

Would definitely enjoy a more in-depth look into these amps and their settings/capabilities

[@raviolimaster]

jl audio as an american made company, really is amazing for sponsoring you to do this. They may be one of the more pricier options, but you get more than what you pay for with them! Long live JL audio!

[@jackal6902]

100% of the time I prefer company’s who get the reviews without sponsorship.

[@markphilpot8734]

You can’t go wrong with Mark’s instructions. They’re clear concise and detailed so you miss nothing. If you do, just reload it and watch it again. It’s a no worries situation. JL Audio has been around and their products have always been high end and their performance is top drawer as well! Great video Mark, but a detailed video will make it much more informative and help those who want to learn the detail parts of the install. Stay safe mates!😊👍🏻😷

[@ryanb8736]

These new amps have it all. I can only imagine what the class A amps will be like on next gen.

[@davect01]

Tunning is key to get the best sound. It is nice that DSP'S are being included into the Amp.

[@marianiosip3962]

Is not included instead you pay for that dsp

[@zeus.edwards2662]

i love using these amps, the most fun is actually knowing frequencies and putting in what frequency number you like for a specific sound

[@roberthopkins8089]

Its the amp you have always dreamed of.. The visual of connections is a life saver.. Any in to out full gain of everything and filters galore... Car audio heaven... Excellent video...

[@JonathanDFielding]

Yes, Mark! Please do an in depth video of the JL Tun software. There really aren't any good detailed videos about how to use it. I have a twk88 stand alone DSP that I tuned myself with a full JL setup with an active 3-way front stage. I'm an electrical engineer so it was a cake walk using their software (very intuitive for technical users), but it is detailed and can be complicated for unexperienced users. Great videos as always! My setup: Source: Cell phone, usually Spotify Premium on Highest quality over a Qualcom APT-X HD bluetooth receiver puck - Toslink digital stereo audio into JL Tkk88 DSP. 3 way active front stage, no rear stage. I also have the DRC-205 for the DSP control. (small = all volume, larger round = subwoofer volume.) Tweeter - Home theater Vifa tweeter (amazing) 20KHz - 2.5KHz 4" mid range - RBH Sound Beryllium driver in cast basket with phase plug- 2.5KHz - 400Hz Tweeter and mids mounted on dash in custom fiber glass and body filler sound deadened enclosure, pointing directly to appropriate ear - I don't care about balanced sound for passengers. 6.5" low mids - JL Audio C5 650 - 400Hz -100Hz. Speakers in front doors. Subwoofer- JL Audio 10W7AE in JL's sealed box. AMPLIFIERS: JL Audio HD750/1 - subwoofer JL AUdio HD600/4 - 2x 6.5" doors and 2x 4" mids both HD amps are stacked on top of each other with JL's HD stack kit JL Audio 300/4 - 2x tweeters and the other 2x bridged into 1 mono bass shaker in driver's seat. I used to have installed (now on the shelf in my office) another JL 300/4 for rears but it doesn't really add much to the driver's sound stage. The sound quality, imaging, sound stage, dynamic range, and impact is INCREDIBLE!!!!

[@juanrabie6712]

Have respect for you man you do all your builds with perfection and it always sounds AMAZING!! Keep it up

[@herbertlafleur4824]

Thank you. I have been waiting forever for someone to show this amp off.

[@tyroneburke814]

It’s looking your in my house been researching vxi Amps all week and spent all morning trying to find as much as possible about vxi Amps and he drops this today ...perfect will be ordering a 600/6 or 800/8 later tonight appreciate this video

[@CarAudioFabrication]

Awesome! Glad it helped. Be prepared to not want to leave your car though, it's too much fun to listen to.

[@realpatriot5896]

@@CarAudioFabrication I will be sticking with my 3 original JL Audio slash series amps a 500/1, 300/4 and a 300/2. With my Pioneer MVH-S622BS do I need to purchase a Jl Audio or an Audio Control DSP for my system and what would you recommend I am running a 10W6V2 center console ported sub box with JL C2-650 components for the front doors and factory tweeter location for the new Jl C2 tweeters as well some C2-650x coaxials for the rear doors and a set of Boston Acoustics Pro 60 components in some Q-Form kick panels run off of the Jl Audio 300/2. I noticed the 300/2 had pre-amp outputs so I was thinking about using those to daisy chain to my 300/4. I do have the remotes for the 500/1 and 300/2 for my dash to control the gain. was thinking I could set up my 300/2 for the Pro 60's and then using my gain control knob from the 300/4 to blend in the sound. What do you think?

[@arenbeers]

PLEASE more JL Tun content to show the tuning process!

[@Bradimus1]

The only thing I wish this used was it's own mic to help in adjusting EQ/timing. Like how a Kicker Key has a specific mic to set those details or my old Pioneer PRS that did timing and auto EQ.

[@nickorozco5933]

You are right. For the price of this amplifier I feel there is a lot to be desired. I’m returning mine back to Crutchfield

[@RebirthTheDead]

Once again another high quality maneuver by JL and couldnt have any other but Mark over at CAF give a nice rundown and usage for this new beautiful amp!

[@edrumsense]

I didn't knew how much I needed this Amp until I saw this video!

[@gkk2001]

It is so nice to see this video now as I was seriously considering the VXi 1000/5i. JL appears to be offering a great DSP package. Thanks again.

[@applejack2374]

Wow! Those connectors brought back memories of the y2k days when computers, back then, used those type of connectors with screws on each side of the connectors! E-machines all the way! Nice to see throw back connectors like that in modern equipment!

[@uscfroadie]

I have the 800/8i running tweets, mids, mid bass, and rear-fill and the RD500/1 for my sub. What an incredible package. Love it!

[@CarAudioFabrication]

That's killer! What's crazy is even the size of the 8 channel is so compact.

[@Polywog77]

i grabbed an 800 as well, cant wait to get it in. smaller foot print than my old slash 4 and 2 channel amps

[@Kikinahm]

10:17 would it work with a Bluetooth adapter and no radio?

[@ryanb8736]

@@Polywog77How are you liking it?

[@Polywog77]

@@ryanb8736 it’s still not in yet… Such a disservice. Grabbed a jd1000 for the subs which are also not in yet.

[@robertsomerville320]

This has got to be the nicest looking amp/DSP out there. JL is always on top, and man does that show here. Great in depth review, can't wait to see the wrangler put together.

[@agreeneyedfella]

You’ve talked me into it. Ordering mine tomorrow. I’ve been planning a new system for my car for two years with an amp and dsp plus replacing my speakers. This is perfect. It’s a nine speaker system and I don’t want any upgrades to be seen. I’ll have it all bought and finished within a couple of months. Thanks for all your videos.

[@gregn3615]

It would be great to see more detail on the Vxi as you continue the Wrangler build! Please consider showing mic setup and the tuning process, would love to see JL's process and all the options the Vxi has to offer. Thanks Mark!

[@twotrackjack2260]

Glad to see that JL isn't simply resting on its laurels and name, it's evident that there's a ton of engineering that went into this product line. Their prices are still a little eye watering for a customer such as myself but the capabilities of this unit are pretty undeniable.

[@davidfalwell8306]

Great job Mark, and of course we'd like to see a full DSP set up for this device...

[@maxspl153]

I'm not a huge JL fan , but this is my favorite DSP software . I like it even better than Audiocontrol

[@Tex735]

Love this channel! LOTS of great info! I'm planning a Wrangler build at the moment and this exact amp looks to be just what the Dr. ordered. Thanks for the in-depth review! Keep up the great work! I REALLY wish I could find an installer locally who seems to care as much as you. Afraid that I'm gonna be doing this DIY so I really appreciate all the videos that you are putting out!

[@DjR3aper]

This versus audio control dsp amp, which is better?

[@davidmaciel8448]

I appreciate everything you do and ur videos, I feel I got all these skill you teach just need the tools. .. I love and appreciate when someone talks passion about there craft, much love & respect. ..

[@lowridingtrucks88]

What's a good head unit for this Jl Audio amplifier?

[@millionkilliati6140]

How does this amp compare to audio controls 4 channel 800w amp for mids and his? Which one would be your pick for your preference?

[@smoothwake]

I started using the Posi-Lock connectors so I don’t have to keep cutting wires back. I just did an install in my 1992 Camaro with their RD 900/5 amp but would have loved to get the VXi amp for the build. Had I known the radio would be so hard to control with the push buttons, I would have upgraded to get the dual control volume knob.

[@Atomwaffen-y3s]

Mark, this really should be VX Training 101, lol. Outstanding 30 min presentation. The JL Audio training vids are rather lengthy, wordy and much dead horse beatings. I would recommend anyone to watch your video, then go to the JL Audio training vids. You got me in the ballpark fairly quick with my 800/8 and the DRC-205 remote, thank you. I've probably watched this 10 times. One bit of fun trivia here- the inputs go to 11. I'm sure you know the joke..

[@HifiVega]

Super thorough walkthrough of that amp! I like the little features like color changing and the double knobs on the remote.

[@CarAudioFabrication]

It's pretty slick for sure. Thanks man!

[@tbarbano1784]

YES PLEASE! More videos on the tuning please!

[@CarAudioFabrication]

👍💯🔥

[@jeffgoetz7919]

Please do an in depth tuning video with this software! Thanks for all the great content!

[@INFRNL1]

I'd love to see more details of the setup/ tuning of these amps as well. I hope that you will be able to put together some videos👍 What are your thoughts of these vxi amps in comparison to using audiocontrol or something else? Keep up the great work 👍. Your videos are very helpful and appreciated

[@dalesmth1]

I like that it has a TOS link input. With the correct head unit, it would make for a very clean install. I know the technology is dated, but it’s not a 5.1 setup (Even though it could handle it).

[@juanrabie6712]

Commenting before you have even watched the video

[@michaelnorton6630]

Thanks Mark - great video as always!!👍🏻 Love from UK🇬🇧

[@CarAudioFabrication]

Ove the Pond! Thanks!

[@keithgregson9573]

This is an ultimate product using DSP PEQ management -pity south Africa missing this range, i have searched spending many hours -nothing available to us.

[@kyle3420]

Hi Mark! Awesome video as always. if I were to ask for an explanation of some of the TuN features, it would be that of the optical input functionality. I have a system planned with a FiX-82 using the optical out to a VX800/8i and I'm having to wrap my head around how this configuration works in terms of output level. I understand that you are dealing with a completely digital signal. How is the 'level' of this digital signal coming from the FiX going to the VXi controlled? Is there clipping? It is obvious that the signal source strength from the factory head unit is what controls this, but I have found very limited information to explain this in complete detail. Any insight would be greatly appreciated!

[@ceavalencia4767]

my bro had me setup his 4 channel and the dsp was very confusing for me as a first timer ..this helps

[@chuckschillingvideos]

There are a lot of these sorts of amps out there - basically every company that offers a serious DSP tool has introduced at least one multi-channel amp with integrated DSP. The problem, as I see it, is that none of them offer an amp with at least *some* AB channels. Since the goal of any DSP system is to maximize the sound quality, doesn't it make sense for these amps to have at least four AB channels (better still six)?

[@maltymower]

Great video. I have a FJ40 landcruiser with the Kenwood dmx1057xr with JL C3-600s separated in the doors, C3-650s in the rear and 2" kappas in the dash. I have the vx800/8i and it sounds horrible. I've been watching the JL audio TUN channel on youtube, but I got more in 5 mins of you adjusting the gains than hours in their channel. But just when you started getting to good parts, you moved on. Please give us more content on the TUN software. I know my system has potential, but need your help ;)

[@reyrojo4702]

Super clean looking amp, I remember back in the days they were all plug and play amps now they require tuners and pcs to tune them. Just like cars, now it's all about codes and scanners not like the good old days were all u needed was a screw driver to tune the carburetor lol just like the old amps lol 😆

[@jessebeatty9696]

Finding stuff that’s Bluetooth and you get full control from your phone is what I’ve been looking for because you don’t really need a laptop for anything these days I really don’t want to get one just to adjust my amplifier and then never use it again

[@Blue_3is]

Bro please do a full tuning video, explaining how to tune crossovers, eq, limiters, slopes etc. Just show your whole tuning process on an install, and when you set something, explain why. I really want to get good a tuning DSP’s

[@jimmedavis3131]

Wish I would have known about this amp before I bought my JL amp last year, but I did buy the twk 88

[@envisionelectronics]

Looks like I found the solution for my Tesla. I like the system, it just needs more power for those windows-down days. Having presets on a knob that’s not tied to a head unit is the “killer app”.

[@wolfthornhawkridge5705]

Great video, very informative. Can’t wait to see the Wrangler build.

[@madtubbs22]

Try out zapco z-150.6 ap. Keep up the great work

[@jayford4685]

Thank u! Just about to wire up a 400/4vxi and 2 1000/1vxi paired with w7ae 12" please make a more in depth video as these amps have so much to cover lol

[@sant919]

I have been looking for this type of info for god knows how long!! Thank you!! I would like more info on program, thanks again!!

[@CeeKayz0rz]

Good lourde, what have I got in my hands!?!? :O Bought some Infinity BeTA's at a store-closing sale for roughly 80% off, and when asked about amps, he handed me this one for 75% off..... And here I am, a high school amateur from 25 years ago, last time I even put a sub in anything was like 15 years ago, and I'm sitting here like, "holy f0urke, there's literally EVERYTHING you can do with this amp!!" :O

[@sibyllinebook7762]

Any major disadvantages in sound quality using something like an iPad as the head unit sending a signal via Bluetooth to a Bluetooth receiver connected to a vx800/8i?

[@denniswalker1640]

Like the content , great show, man I sure wish ,that the manufacturers, would make on screen option , so the we could tune our dsp's on the screen of our head units ,maybe one day , so we don't need an external lap top, but great show mark!!!

[@PC_TV_73]

OK I just went to a place that was going to put a system in my truck using this amp and changing some speakers in my Dodge Durango and they wanted $45,000, that sounded like a lot to me. They did say some custom work was involved but man $45,000.

[@CrinosAD]

Oh man... I was planing to do a build in my truck with a Gladen/Masconi Pico 8 (with built in DSP) but now I'm not sure anymore... :)

[@kswis]

Only $1200? I thought for sure it'd be way closer to 2g. Well it'll be the end game amp in my collection just not sure bout the harness. That seems a bit weird just my opinion

[@dwayneratliff1142]

@caraudiofabrication I need a deep dive on tuning these VXi amps. Thanks in advance. For some reason JL Audio thinks it’s ok to make their customers sit through 5+ hours of training video about these amps and I still have questions. Please do a concise video like you always do. Love your channel!

[@roamsweethome4895]

How does the DSP in the VXi series compare to JL’s TwK-88?

[@juhu34]

This would have made it easier to tuned in my morel speakers hehe, got a god deal on em so I decided to try em out. Turns out I needed to tune the 16khz range down by about 10db, on an amp that only gave me -6db adjustment, to get a flat curve. Good thing the crossover came with the option to make the tweeter 3db louder hehe.

[@andrewkenny742]

JL Audio really needs to get TUN mobile updated to never versions of Android!

[@rayjoyce433]

yh im gonna need a more in depth look at this amps software please

[@orhunokcu8660]

Can you compare AudioControl D6.1200 with JL Audio VX600/6i?

[@boedilllard5952]

Can you use the built in infotainment system to adjust the DSP accurately?

[@kuete1000]

Gracias por compartir new technology

[@kx500rider1991]

Great explanation..great job

[@BillLambert]

This is something I wanted in my previous vehicle, but it did not yet exist, so I ended up DIYing a DSP in front of the amps (thank jebus I'm a tech wizard). I *really* like what JL Audio have put together here, in such a small and stylish box. The features are all there for a very high-end product, but what is with that 100w@2Ω power rating ? Sure, it's enough for a lot of systems, but I think in a flagship amp they could have at least gone for 125@4Ω / 175@2Ω. That would have sealed the deal for me, but in its current configuration it's just not powerful enough for the build I have in mind, and I'm back to needing a separate DSP, split amps, and all the bulkiness that entails.

[@CarAudioFabrication]

Check out the VX600/2i for more power

[@MrTyger365]

Since you can control everything from DRC let's say may I be able to use my radio volume as usual???

[@ray1453]

Very good video

[@eblkheart]

Great video as always! Question however, currently I have a JL Audio RD900/5 with a twk-88 running completely digital via toslink. Should I move to a VX600/6i or stay where I am? I do love the software that I can use on the twk88 and it's nice to see it here with the VX so I would be comfortable tuning a new system. Thoughts?

[@Trappertrapperke12]

Hi Mark... please do a video on how to install a full car audio system in a house

[@coreyjackson2241]

I have a aftermarket Tesla style radio with only front and rear rca’s and no sub rca. Can I use this amp instead of buying a audio control lc2i. Hook up directly to amp which will give me the ability to hook up a sub

[@churrinnunez8184]

I bought a pair of subwoofers which amplifier do you recommend and which is the right one for these JL Audio 12W6V3-D4.

[@neilvestervictor180]

nice set up Mark respect from st Lucia

[@anthonymyers-35]

Well done! You can only go over so much

[@ninjamike04]

What JL Amp would you recommend to use with this, to power 2, 10 inch JL TW3?

[@jeremy7923]

So does it have any tools for actually helping you set the time delays, eq and such? If not, what software/mic would you recommend for setting those values?

[@Jazzyexplorer]

In your opinion which amplifier is better between the JL audio 6 channel DSP amplifier and the audio control 6 channel DSP amplifier

[@michaelgirard2040]

Hello, I’m getting focal kx2 components up front of my 2017 Cadillac ct6. And focal coaxial in the rear. I need help deciding between this amp and the audio control d6.1200 thanks!

[@MultiMan509]

I have the VX800. Had it installed by a shop. Will my current tune pull up on my laptop when I connect to the DSP? Or do I need to get them to send me the file?

[@Joe-fh5em]

Please more amp tuning capabilities

[@chicken133221]

Love the videos. I have a slingshot. Installed a dsr1. Is there an easy setup to go off of speakers.

[@brianjacobsen6964]

It doesn’t look like I’d need to use the Fix 86 if I want to use my OEM head unit if I use this amp, is that right?

[@dancliment3170]

Question, does this eliminate the need of the FIX 86 or 82 for a stock head unit?

[@emililiev1621]

Hey, that looks quite nice. Can you run a component speakers without crossover using this amp ?

[@biglike7981]

Is there a way to provide the make and model of speakers "tweeters, midrange, sub etc" and have the dsp automatically calibrate everything via a microphone. That would likely create a much better end result that is customized for the specific environment. Trying to manually calibrate everything is really designed for the pro installers who have years of experience.

[@craigwilcock9656]

Hi when using this amp with the high level inputs straight from a factory system with rca to speaker cable adapters is it true that the negative wires should be connected to ground and not the speaker negative like Rockford fosgate suggest with there adaptors? Or just fine to connect to the speaker positive and negative normally

[@Jerry4baker]

This is a lot of work for my brain but probably worth the thousand dollars i will probably stick to normal amp when i do my speakers

[@ray1453]

I’ve been having issues loosing channels after oem remote start use. Any tips?

[@EpiceverythingProductions]

Are there any in depth videos for tuning with this amp? Had a shop install this amp and set one tune but want to add more tunes for different types of music.

[@Max88511]

Love all the videos you make, you helped me figure out some issues while installing. I have a question i am installing an amp on a 2003 Nissan frontier. I'm also going to use a blade fuse box for other light's I will install in the future . Can I connect the amp power (12v) wire and the wire coming from the battery to the blade fuse box in the same place? Hope my question make sense thank you..

[@FullSendPrecision]

Does it have any "auto tune" capability like the Audio Control stuff does? Output from my Uconnect system is far from flat (as you know) and need to replace my AC 6/1200

[@insanerally7068]

Just got my vxi 800/8i +1000/1i installed....yoooooo

[@fernandopina4161]

How do you like it? Video ?

[@glidingisriding5523]

I’m in the process of trying to get a SQ system into my truck and I’m not sure if this amps better than audio control LC6.1200 and I’m also in limbo of what 3 way components I want to use the JL C7’s are so expensive but is there any other recommendations you may have thank you for your time and awesome videos

[@desertr4062]

Thanks again for another great video. Easier to understand and more informative than the JL Audio Vids. Any chance you could do a review of the same amp, but the marine version?

[@CarAudioFabrication]

🤔 perhaps! Thanks for watching

[@anandshah71]

Am I wrong if I am going for a miniDSP harmony dsp 8x12 with Dirac is a better buy than jl audio 6 channel dsp same price

[@scottiffanimccord1509]

Yes a more focused review on tuning. thx

[@neilvestervictor180]

just want to ask what set up you would say to use for Suzuki swift on a budget