Рет қаралды 3,013
This video covers how to use OLED displays (both without and with an I2C multiplexer) with your XIAO ESP32C3 board and provides the code for each scenario.
The first part goes over how to connect your displays without an I2C multiplexer, provides the code, what to change, what to take note of, and how to customize font. I show you the right and wrong ways of connecting displays, and the result of each case. I make the mistakes so you don't have to!
The second part goes over how to connect your displays to an I2C Multiplexer, and then to your XIAO ESP32C3 board. This video should give you everything you need to get started with your board and OLED displays!
At the very end is a quick clip of my soldering of the resistor / jumper for the address change of the OLED *which is optional*.
The link to download / copy the code for each use-case is featured on my Github repository here:
github.com/rhitalin/MultOLEDD...
Download the ".ino" files (these are the Arduino code files/scripts needed to upload to your XIAO ESP32C3 board).
For connection without a multiplexer: github.com/rhitalin/MultOLEDD...
For connection WITH a multiplexer: github.com/rhitalin/MultOLEDD...