You can see how to rebuild the Control Valve on your Borg Warner Velvet Drive 71. You can find parts online. I used Hale marine www.halemarine.com/ they were super nice and helpful.
Пікірлер: 9
@Sergio-tn8rw Жыл бұрын
Hello from France, I'm going to try this, because I no longer have a forward or reverse gear.
@nicholasrego12553 жыл бұрын
Can one change the control valve on Warner 71C while its in the boat or does the transmission need to be removed?
@ItaiLeshniak3 жыл бұрын
You can definitely do it in the boat, no need to remove the transmission.
@elimeza71233 жыл бұрын
Will this fix the shifter that is stuck in neutral?
@ItaiLeshniak3 жыл бұрын
This can be one of many reasons, Make sure you have good oil pressure and that everything is moving smoothly. This is not too complicated to remove and clean so definitely try it. You can watch my other video on how the transmission works. Good luck!
@elimeza71233 жыл бұрын
@@ItaiLeshniak thank you for the advice.
@elimeza71233 жыл бұрын
With the engine off, should I be able to manually move the shift lever from neutral forward and reverse?
@ItaiLeshniak3 жыл бұрын
@@elimeza7123 When the engine is on or off you will be able to move the lever (assuming you disconnected the control cable). However, when the engine is off you have no oil pressure in the transmission so it will not go into gear (will stay in Neutral).
@elimeza71233 жыл бұрын
@@ItaiLeshniak got it out and cleaned off the rust, working perfectly. Now need to take out the stuck detent ball and replace with new ball and spring. Thank you for your help