FYI - you say PVC 1" adapter but at 52 in the video show a slip x slip coupling
@thegreatmrbox25 күн бұрын
Where did you get the purple gun?
@ItaiLeshniak23 күн бұрын
harbor freight
@thegreatmrbox23 күн бұрын
Thanks
@robertroland533327 күн бұрын
You have a good understanding of these engines. What are your thoughts on a stalling issue I have. I have a 2006 Supreme with this engine I replaced all filters and the IAC valve. It has a new cap and rotor. After running the boat out on the lake when I return to the 5 MPH area while idling into the dock it will stall out and some times stall but not completely shut off. It starts right back up. Any ideas of where to start checking? It runs great otherwise but irritating when it randomly does it in the 5 mph areas. Everyone seemed to say IAC valve but a brand new Mercury valve was installed.
@ItaiLeshniak27 күн бұрын
I would assume you either have an air leak so I hope you changed the head gasket. The other thing you may want to try and clean the injectors. Hard to say without getting more information. Check out my other video on how to connect to the computer. It's worth the investment you may find out some interesting stuff.
@robertroland533327 күн бұрын
@@ItaiLeshniak Yes I replaced the plenum gasket when I replaced the IAC valve. I will check out your other videos! Thank you.
@MrTimjwilsonАй бұрын
This is genius. Thank you. I am also going to experiment using an airlift connected to a compressor with no water pump.
@Sergio-tn8rwАй бұрын
bonjour le mien fait du bruit en marche arriere...
@jessejames5081Ай бұрын
What air pressure are you using with the gun and how is it working with the liquid container sealed ?
@williamsobers50572 ай бұрын
I don't know how to share Amazon links in comments. However, I ordered a blower fan with an adjustable power supply for $19. It looks like it will plug into the pump instead of using the car plug. I also ordered the pump kit from this video. Both units are supposed to arrive tomorrow May 13th.2024. The blower fan is for an upcoming waste oil furnace build. I will report back as to whether or not the power supplies are interchangeable. It's a 6000 rpm blower fan if anyone is interested in looking it up.
@williamsobers5057Ай бұрын
The power supply from the blower fan works awesome. The pump and sprayer work well out of the box. I don't have the paint sprayer and PVC yet. I'm going to try and get to harbor freight and home Depot tomorrow.
@dennisthatcher43842 ай бұрын
Nice, concise and straight foreword. I appreciate your efforts. Will build one like it tomorrow, been working on a foam generator for a couple of days now but this looks a lot easier.
@KTPDAILY3 ай бұрын
THANK YOU SIR -- I AM YOUR NEW FAN AND SUB --- BEST WISHES
@kenesegetfield3 ай бұрын
What can you eat it with like what does it take good with?
@ItaiLeshniak3 ай бұрын
Yogurt, Pancakes, or just eat it straight from the jar :)
@george10554 ай бұрын
I can only say, thanks a million!!!!! great video!!!
@BrettMJuddMSW4 ай бұрын
Great build. Will definitely follow. A question. Why a 12v pump and not a simple 110v fountain pump?
@ItaiLeshniak4 ай бұрын
You can use a 115V pump but not a fountain pump it simply won't have the needed pressure. The pump's pressure needs to overcome the compressor.
@BrettMJuddMSW4 ай бұрын
@@ItaiLeshniak thank you. I'll look at the pump you used for specs. Looking forward to a summer of foam.
@chrisk71185 ай бұрын
Just wondering, what is the benefit of this terminating into a thinner pipe? Couldn't the gun barrel simply end at the end of the 1" pipe? The wire will stop the stainless steel wool coming out so why is the thinner pipe necessary on the end? Thanks
@thegreatmrbox22 күн бұрын
I was wondering as well
@groupbmotors5 ай бұрын
Do you know if this is compatible with the 2007 black Scorpion 5.7? Thanks!
@KC-xu9tl2 ай бұрын
It looks like he has that engine. I have 2007 black scorpion so planning on getting this for upcoming season
@johnecobuilder2746 ай бұрын
Hello. What specifications that compresor has? I am going to buy one, but I ignore those machines at all
@johnecobuilder2746 ай бұрын
Thanks
@ItaiLeshniak6 ай бұрын
MCGRAW 8 gallon 1.5 HP 150 PSI Oil-Free Portable Air Compressor from www.harborfreight.com/
@archilife25556 ай бұрын
Fantastic, thanks for sharing!
@victorgrange83616 ай бұрын
Excellent and fantastic video. God bless you. This lightweight and simple professional DIY Air-crete cannon gun will save me a lot of money. Also, I will be using it with a low-cost Car-wash liquid soap solution with 1:100 gallon dilution for my CLC block making pilot project in Africa. Thank you a million and have a great new year celebration. VG
@Juangaba7 ай бұрын
Excellent video obeyed the 3-S rule Short, Sweet & Succinct
@leftlink7 ай бұрын
due to inflation this will be around $40. Steel wool items linked will run $19 and the sprayer is $17, to give you an idea of 2023 prices. Still I like the idea and will try it.
@ItaiLeshniak7 ай бұрын
Make sure to look at my other videos with the improved design.
@leftlink7 ай бұрын
@@ItaiLeshniak i quickly glanced at the improved design; it still uses an air compressor? I think if I have success using foam for my application I can then go to the other design but I don't think I need to get the pump right now. thanks for doing this.
@sebausa17 ай бұрын
Awesome
@khiemn49407 ай бұрын
What's the spacing measurement between the 2 pipes to hold the skis?
@ItaiLeshniak7 ай бұрын
The gap needs to be 1.3", however your skis maybe thicker . You can find the drawing here drive.google.com/file/d/1x2muUjxcgrfHhrmQz6MI_XUujH5fPkst/view?usp=drive_link
@whatthefrerejacques8 ай бұрын
Well done
@rogertaylor86158 ай бұрын
Very good job on this
@danialhowe98149 ай бұрын
FUSE!!!!
@fevolenko39959 ай бұрын
Looks great but that is nowhere near enough foam if making aircrete. You wanba fill a barrel quickly..
@ItaiLeshniak9 ай бұрын
Look in the video description
@barrymountcastle88799 ай бұрын
Excellent design.
@adrianaredditt-rodriguez7929 ай бұрын
Sorry if I missed it in the video - did you cut the existing power line from the pump and replace it with your own? The one you linked on amazon has the car charger connection. Could I substitute with a different power supply that I can plug in to that adapter? Thanks!
@ItaiLeshniak9 ай бұрын
I used a motorcycle battery. You can plug it in your car or cut and connect to a battery. You will need a powerful 12V power supply if you want to connect directly to one.
@MrTimjwilsonАй бұрын
@@ItaiLeshniak You can also use almost any 110/120 AC pump.
@mariadelmarjuan76899 ай бұрын
Good idea, I prove it, thanks
@alphagrendel9 ай бұрын
Best foam generator I've seen!
@user-mj4mw3fb2q9 ай бұрын
You never made an impeller replacement video for this engine? I have same engine/boat. Appreciate what you have posted👍
@ItaiLeshniak9 ай бұрын
Not yet. Maybe next spring.
@kenleyhockett7473Ай бұрын
I need impeller video also! And where is the sea water impeller
@jd242915 күн бұрын
@kenleyhockett7473 the sea water pump is under the passenger (port) idle pulley at the very bottom. I just changed mine not too long ago.
@ofcv12389 ай бұрын
Well done
@HansHartman10 ай бұрын
I tried that, but had a tube feed for the top. It worked okay. I also found that just a small amount of glycerine in the water makes the bubbles stronger. They last longer.
@wulfclaw492110 ай бұрын
I appreciate so much that you shared this with everyone. Some try to gain on what they come up with. I cN understand that - to a point. Awesome Aircrete gun ! Now I can replace a 5 yr old design that didn't work so well. All the best, Wulfy
@webderek10 ай бұрын
Awesome! Thank you.
@markchilluffo963810 ай бұрын
7th generation soap has glycerin 1oz soap to 16 oz water
@markchilluffo963810 ай бұрын
👍👍👍
@ItaiLeshniak11 ай бұрын
Look at the 2nd video, there is a link in the description.
@_Otaku-kt8be11 ай бұрын
Theoretically this works but the amount of foam output is pitiful
@K2board161 Жыл бұрын
Love this video. Have you or anyone you are aware of. made this yet? Would be very interested in the real life test. Have you made the plans available?
@GeomancerHT Жыл бұрын
Did you try adding glycerin to the mix and comparing the foam life expectancy?
@ItaiLeshniak Жыл бұрын
I didn't do a comparison.
@GeomancerHT Жыл бұрын
Excellent quality foam but tiny quantity, extremely inefficient.
@ItaiLeshniak Жыл бұрын
look the the next video (2nd version) kzbin.info/www/bejne/qqSloIyJoJqAr9U
@GeomancerHT Жыл бұрын
Thank you, very good improvements!
@christianpfeiffer2374 Жыл бұрын
I have this engine but do not have that monitor gauge near the engine. Is there a simple monitor to plug in to keep track of the engine hours?
@ItaiLeshniak Жыл бұрын
look at this video kzbin.info/www/bejne/p6Ose2d-qNpkf7c
@meekeec.2867 Жыл бұрын
can one use a Submersible water Pump instead? If yes, what type or model would be best? Thanks.
@ItaiLeshniak Жыл бұрын
No. It does not have the required pressure.
@meekeec.2867 Жыл бұрын
@@ItaiLeshniak thanks
@Sergio-tn8rw Жыл бұрын
Hello from France, I'm going to try this, because I no longer have a forward or reverse gear.
@mariyaterzi7364 Жыл бұрын
I cut differently. Taking hairy part off first and take the seeds out. I’m leaving the skin on. It’s so better then without the skin.
@stevenanderson1430 Жыл бұрын
Did you use marine grease?
@ItaiLeshniak Жыл бұрын
yes, it's easy to get at any hardware store.
@johnnyllooddte3415 Жыл бұрын
but i need 5 gallons of foam
@ItaiLeshniak Жыл бұрын
Look at the other video. Linked in the description.
@JoshConstant Жыл бұрын
Where did you find the electrical schematics ?
@markeldredge8899 Жыл бұрын
Great video, I have the exact same engine on my Centurion Avalanche 2007
@markeldredge8899 Жыл бұрын
I like the water strainer tip. I intend to add this to my system. Nice narration on the video. Curious if you pulled it to rebuild it? Did you do a video on that?