converting my MTB to ELECTRIC | tongsheng tsdz2 from Yosepower

Get $10 off everything from yosepower with the code "DAZproject-10" from the link below (also helps the channel, thanks):
yosepower.com/?ref=cfgqfav8
in this video, i'll convert my sisters' bike to electric thanks to the help of yosepower which sent a tongsheng tsdz2 conversion kit to try out.
grab your favorite drink and enjoy this review!
follow me on Instagram:
daz.project...
music:
Aurora by Sappheiros | / sappheirosmusic
Music promoted by www.chosic.com/free-music/all/
Creative Commons CC BY 3.0
creativecommons.org/licenses/...
Otjánbird Pt. II by Spheriá | / spheriamusic
Music promoted by www.chosic.com/free-music/all/
Creative Commons CC BY-SA 3.0
creativecommons.org/licenses/...

[@mksmith713]

What did you do to mitigate thew rear derailleur cable under the BB? Every bike I've ever done has the cable guides in the way and had to be ground nearly flat to slide the motor in.

[@utubeape]

personally I stripped the plastic housing off and filed a slight groove less than 1mm deep at the lowest part of the bottom bracket, and piled in some grease

[@mksmith713]

Oddly, I started doing. Doesn’t really matter too much, no one switches that gear anyway. They put it in third and leave it there forever.

[@zagonicsaba]

The previous version of this motor "Thongsheng 1" suffered from a manufacturing problem. The main axel had grooves on both sides, that caused the break of the axel at those grooves, remaining without a pedal in the middle of nowhere. Do you know if this issue was solved. Can you make a teardown video, so we can see how the axel looks on this version? Thanx.

[@theredmaster_superbee]

Hello, I am interested in "tongsheng tsdz2b" 750w, but I want to know if there are brakes for 700c racing or road bike type handlebars, or bullhorn handlebars, the brakes that cut off the current from the motor for greater safety. Can you please explain to me if they exist? I also want an accelerator and I see that they don't sell batteries... what battery should I buy? Thanks

[@DAZprojects]

They do sell batteries, brakes with sensors exist and you can't find them on AliExpress together with a thumb throttle

[@jackpiki]

Molto bellino, dove sono i trail che mostri alla fine??

[@viliammajer8291]

What frame is it please Aluminum or carbon well thank you

[@dannyd976]

Currently starting the same project on a full suspension mountain bike. Because of the rear swing arm you are unable to use the fixing bracket that prevents rotation of the motor in the bottom bracket. Have you had any issues not installing the fixing bracket on this bike? Have you done anything to mitigate some of the risk?

[@DAZprojects]

I had zero issues, just make sure to tighten the lock ring every once in a while

[@dannyd976]

So I did the upgrade. The motor wants to rotate ccw when looking at the right pedal crank. So the motor wants to rotate into the downtube. My lockring did eventually work loose when riding and the motor nearly broke a hole through the downtube of my aluminum bike frame. To address this I placed a shim between the downtube and the motor. 3d printed it out of ABS filament with 100% infill. Then tighten the locknut well.

[@DAZprojects]

@@dannyd976 good job 👍

[@kevinwilliams8502]

​@@DAZprojectsI'm same, never fitted the bracket on 5 bikes, never had an issue

[@CM-1723]

Did you get the 350watt motor ? Is it powerful emough for mountain biking , whats it like up hills etc ?

[@kevinwilliams8502]

I got the 36v 350w version and think it's great, goes up 20% + hills with some effort from the rider, I do have a 42tooth cassette on the back but I got a 52t on the front with adapter for the offset

[@clarenceniles1934]

What battery did you us and where did you get it ?

[@YOSEPOWER]

Hi, the battery used in the video is " YOSE POWER 36V 10.4Ah Original Li-ion Cell Lithium-ion Battery Electric Bicycle Bottle New Black DIY". However, it is out of stock now. Maybe you could click the link in the description and take a look at other batteries from our online shop. Thank you very much.

[@Hardware244]

Wheres the kit? its not even on the website that you linked

[@YOSEPOWER]

Hi, the mid-motor kit is in stock now. Thanks for your support.

[@durk541]

You should really be using a torque wrench on those cranks

[@Shishou_Shi]

Not everyone has that kind of money for a rarely used tool. The cheap ones are often off by over 20%. For cheap: Better to use a luggage scale and calculate your lever length to get the right torque.

[@durk541]

@@Shishou_Shi you can just get a beam type torque wrench that never needs any calibration.... I've had mine for 10 years. The click type from harbor freight is decent I use the 1/4 inch click type to rebuild small engines(rod bolts) with no issues but I had the 3/8 click type and never got it to work properly

[@Shishou_Shi]

@@durk541 harbor freight?

[@kevinwilliams8502]

Never used on on the 5 motors I've fitted , never had any issues

[@kubakarwecki2016]

You convert Normal size motor or 100mm ?

[@DAZprojects]

Normal size

[@JelckedeBoer]

Would it be possible to adapt this motor to a 90mm frame? Do you need a different axle allso?

[@DmitrySkvorcov]

Manual how to kill cables...

[@rodriguesfa271]

YOSE POWER 36V 10.4Ah Original Li-ion Cell Lithium-ion Battery Electric Bicycle Bottle New Black DIY ????

[@cosmefulanito5933]

Nice but expensive.

[@urim225]

That is not expensive wtf you talking about

[@cosmefulanito5933]

@@urim225 389 Euros is not cheap at all...

[@Beloff777]

​@@cosmefulanito5933 Bafang costs a 1000€ so it's not that bad

[@Random-ed2xf]

It's one of the cheapest on the market especially having a torque sensor.

[@cosmefulanito5933]

@@Random-ed2xf The market is really expensive then.