Tongsheng TSDZ2 or Bafang BBS02B - 500W Mid-drive Comparison... Which one to choose?

** Thank you for SUPPORTING this channel PayPal.Me/lukeloru 🙏
12 months ago I had no idea which mid-drive ebike kit to buy.
I decided to go for a Tongsheng one. And I really liked it!
But soon I wanted to have a second ebike back in my hometown,
so I tried a Bafang kit. And I loved it!
What's similar about them? What's different? Which one is the best?
Enjoy! 😉
Locations:
- Paris, Île-de-France, France
- Bari, Puglia, Italy
** ENABLE the subtitles! (CC)
---
Chapters:
0:00 Welcome
0:56 Tongsheng TSDZ2
1:20 VLCD5 display
2:48 TSDZ2 motor and cabling
3:58 TSDZ2 pedal assistance
5:03 TSDZ2 throttle
6:10 Bafang BBS02B
6:30 P850C display
8:16 BBS02B motor and cabling
9:04 BBS02B pedal assistance
10:02 BBS02B throttle
11:06 Conclusions
12:32 Greetings 👋
---
Consumption comparison Bafang Vs Tongsheng:
• Tongsheng 10 Km THROTT...
Bafang BBS02B 500W:
• Riding a Bafang 500W m...
Bafang BBS02B 750W:
• Riding a Bafang 750W m...
Tongsheng TSDZ2 500W:
• DIY: First Time with T...
About ebikes (subEN-subFR):
• SPIEGONE E-BIKE 1: Bic... (part1)
• SPIEGONE E-BIKE 2: Bat... (part2)

[@LukeLorusso]

[IT] Il limite massimo di potenza nominale per le bici elettriche in Italia è di 250W. Anche limitando la velocità a 25Km/h, una bicicletta che sviluppi una potenza nominale maggiore di 250W (anche 500W) non si può usare sulle strade pubbliche Italiane. Chi lo fa si assume la responsabilità delle proprie azioni (e contravvenzioni). Questo video è da intendersi a solo scopo dimostrativo e NON è da intendersi come esempio da imitare. Poichè è destinato ad un audience più ampio che l'Europa, è stato scelto un 500W come esempio per mostrare le capacità del motore. --- [FR] La puissance nominale maximale autorisée pour les vélos électriques en France est de 250W. Même si la vitesse est limitée à 25 km/h, un vélo qui développe une puissance nominale supérieure à 250W (même 500W) ne peut pas être utilisé sur la voie publique français. Ceux qui le font s'assument la responsabilité de leurs actions (et amendes). Cette vidéo est finalisé uniquement à la démonstration et n'est PAS à un exemple à imiter. Comme il est destiné à un public plus large que l'Europe, un 500W a été choisi comme exemple pour montrer les capacités du moteur.

[@eXTreemator]

Velocita crapacita. They may as well say take all the 180horses of the car motor, and leave only 10. Doesn't mean anything

[@Ematuresco]

does the Tongsheng have cogging ?

[@LukeLorusso]

@@Ematuresco it does, like any ebike, bit it's so light that you don't feel it! As for the noise, it's not disturbing. I find it more than tolerable. Same for Bafang 👍

[@Ematuresco]

You could compare the so called "Puma" motor then you'll have all three steep-incline motors that are on the market, tested.

[@michaelsprinzeles4022]

@@LukeLorusso Cogging only takes place with direct drive motors. It's the effect of drag from magnets in the motor which causes drag while pedaling. Mid-drives have a freewheel or clutch mechanism as do geared hub motors so no "cogging".

[@davedzone]

Nicely done. I appreciate the way you broke it down and went point by point.

[@crispindry]

Thank you Luke, this video has been very helpful to us.

[@cosmiccharlie8294]

I have the BBS02 and have no complaints thus far. Thank you for your observations.

[@hai-hotranphotography1169]

Thank you for your video. Very helpful. I am considering these two.

[@nicolas.1882]

Grazie mille! Such a comprehensive comparison.

[@robertpavic336]

Thank you for detailed review and many informations. Keep up 💪

[@joe0932]

Thanks for the video! Very informative :D

[@rhiantaylor3446]

Thanks, great video. Bari looked beautiful and I would be there too - if we were not locked-down in rainy London - maybe in a month or two...

[@AlteredCarbons]

great video my dude. loved it. good points all the way around

[@chris415-a]

great video, you hit the right questions for me.

[@susanjoekeenan4154]

Thank you for doing this. I went with the Tongsheng because I wanted very simple: No throttle, no ebrake, etc. Having just 3 wires and a really simple choice menu was the deciding features for me. Also, I did not care about speed. Well I did as I'm a very slow cyclist so just getting some assistance was beneficial. Also, I like the idea of torgue sensing. Didin't see that on the Bafang. Completed the Tongsheng install and like the results so much that I will now convert my mountain bike with a Tongsheng motor. And I save the cost of a battery. Can't ride two bikes at the same time so one battery works just fine.

[@ZephaniahDavis]

Super duper useful. THANK YOU.

[@al-du6lb]

Best review of the two motors on youtube I've seen. I'm leaning towards the tongsheng for the torque sensing feature.

[@szolanek]

2022 here. Just learned about Bafang a week ago. Now about Tongsheng. Thanks, I will take the latter. I had 250W hubmotors. Around the hills I often have to face 8-9 km/h sections. A 5OOW Tongsheng will boost it up enough. I don't want to fly. You just talked me out of Bafang :) +++ I just found a page, they sell it with stickers, you can put on the motor, saying 250W. Clever!

[@SrYorezz]

Excelent and really helpful video

[@kramsenoj1]

Great video Thanks!

[@midknight2K]

Great video. Thank you

[@olitonottero7620]

super helpful thanks

[@Kumek01]

Great video!

[@lazmotron]

Very good Video. Thank You.

[@StigEtDump]

Interesting comparison, I have been wondering which to buy and I'm as torn as I was before watching. Still, v informative, thanks for making the effort.

[@szolanek]

Which one you have choosen?

[@vegetasanchez7583]

thanks king im gonna look into this bafang

[@vegetasanchez7583]

never heard of apulia looks beautiful

[@jamesvaneynde4856]

I got the Bafang 750w and love it so far I use it for the hill where I live I am 73 yeara old

[@FreddeLamotte]

Merci beaucoup - j'espère que ton séjour à Paris se passe bien

[@LukeLorusso]

Impeccable, merci ! Je teste le Tongsheng presque tous les jours et avec les nouvelles pistes cyclables ça marche trop bien

[@derykmacleod4979]

thank you

[@jelleterpstra65]

Thanks for the info, i have installed a bbs02b 36v 500wat middrive motor 48T chain wheel front and 13/34 T cassette rear it have a lots power like a horse hi hi ferry ferry nice, the bike is a Giant expedition expert series. I draw a helmed course mij hear is not enough to protect the head.

[@ballesterom]

Very nice video thank you for all the input on the Bafang motor I am considering to purchase one to convert my MTB and I am studding all the little features and advantages that you can get from each brand.

[@ballesterom]

already liked and subscribed

[@mikethomas6051]

Bbshd is the best of the bafang bunch, its easy to fit, only work your do is removing bottom bracket, re-feeding gear cable, removing front derailleur and its gear shifter, just make sure ur wheel rims are double walled.

[@user-ny2rb5xd9h]

very good review

[@Lord_RFAS]

I'd go for the Tongsheng if only for the torque sensor. While rotation sensors 'can' work, I'd want the motor output to scale with the force I have to apply into the bike. Feels more natural, that way, and is why I prefer mid-drive motors in general.

[@MrCleaner82]

That pedaling assist really was thing what I was looking. I don’t like “ghost pedaling” so tsdz2 is my way to go. Thanks for good video.

[@LukeLorusso]

Happy to help man! Just check this video before you actually choose, so that you really know pros and cons of the TSDZ2 (from min. 9.35) kzbin.info/www/bejne/p3SmoXqfqLhmeZo

[@daytriker]

You couldn't ask for a more accurate comparison between these 2 systems. I've been installing both for about 5 years on recumbent trikes so other than a couple of small power delivery differences, your evaluation is spot on. Another thing to add for many buyers is the difference between solving problems. The Bafang would seem to be the better built of the 2 kits but the Tongsheng is by far the easiest to repair. Both have worldwide resellers of spare parts so you are not locked into proprietary dealers that you have to ship your kit to for repairs.

[@JK..07]

Any Chinese made ebike motor is easier to repair cos spare parts are easier to get ,compared to Bosch.....Here in France Befang is the most preferred than any other..

[@justincase3230]

What parts and tools would you recommend taking on a long trip for emergency repairs?

[@daytriker]

@@justincase3230 If you are going to have problems with a motor kit it will likely be internal. The Bafangs are known to have Controller problems & the Tongshengs are known to have spragg clutch & Blue Delrin Gear problems. In my opinion, I would make sure to service either unit with lots of grease on the gears & ride ether unit for a few 100 km rides before setting off on a long journey. Once your kit is broken in & maintained, either kit will provide many years & kms of trouble free service. Just be sure to use your gears as you would without the assist & the motor for an extra push for your convenience. In other words don't let the motor lag by using high gears &/or the throttle to climb your hills - use your gears & leg power too.

[@infratuna]

Premium review!

[@nlum3135]

I have a Bafang BBSHD on my 2008 Santa Crur Blur dual suspension; insane power, perhaps too much, but really easy to ride especially if you dont want to work up a sweat. I also have the same motor on my 2020 Catrike tadpole recumbent; I hit 37mph on the flats with just the throttle. Both are enjoyable to ride. And I have Tongsheng TSDZ2 48V on my 2020 Trek Marlin; I upgraded to the 860C display and motor controller with the Open Source Firmware (OSF) V1.1 from eco-cycles...amazing power application as power does not cut off after 80 cadence and just keeps going as your cadence increases to 120. So for myself and my family, we need the exercise so the TSDZ2 is better suited for us. The OSF provides more than enough power at power level 9 (9 of 20), to climb all the hilly terrain without killing us. My buddy who has a Bulls eBike with the Brose motor says my Marlin performs just as well as his Bulls. I take that as a compliment to the OSF upgrade. I am now in the process of converting my 2020 Trek Roscoe with the TSDZ2.

[@LukeLorusso]

Thanks for sharing! As for now I am in a "transition period" and I cannot dedicate a lot of time investigating in OSF, but I am very interested in it and looking forward to try it as soon as I can

[@gregaule7941]

Hey, do you have any heating problems on Tsdz2? I ask because I read some people say the motor gets real hot very fast?

[@SHINE88]

Informative video, thanks. I am in the process of installing TSDZ2 on a road bike right now. Planning to use bbshd on a mountain bike next.

[@victorvannatter312]

Great video and comparison. Just to let you know you can buy a programming cable for the BBS O2 for around $10, and you can change all the parameters about it that you mentioned in the video that you wish you could. And it’s very easy to use you just hook it up to a laptop.

[@kalexander841]

Good video

[@budwhite9781]

First off, great, detailed video here. 2 things, I wish Tongsheng produced a 2-3kw version that could run up to a 72v battery. They could really improve sales, because the BBSHD and BBS02 both don't include torque sensing pedal assist. And of course, the second wish would be if Bafang made a new version of the BBS02 and BBSHD with torque sensing added. Cheers.

[@wilhelmcramer7376]

Jup non comparable on that point. Surely not let's say whan using a 72v 24ah battery and 52t chainring

[@VWonder737]

Your voice and accent reminds me of Great Scott. Good video.

[@garth62]

Thank you for the comparison - very informative. I am favoring Tongsheng for a couple of reasons, mainly the pedal assist being controlled by the torque sensor giving a more natural experience. Surely this should in theory provide a longer range based on the fact that the power assist is directly proportional to the riders efforts (so uphill for example requires more effort from the rider rather than "ghost pedaling" and letting the motor do all the work thus draining the battery quicker)

[@colincampbell4261]

Yip.

[@LukeLorusso]

Hi! Now there's a video about this :) check it out -> kzbin.info/www/bejne/sGbOfJWKmtt8kJo

[@IcecyOutdoors]

Believe me you're not ghost pedaling uphill unless you have the pedal assist at very high levels and the gear selector at low. The beauty of Bafang is you can set the PAS level to whatever suits you best. You want more pedaling effort then set the PAS level low, or want to exercise minimum effort then set it high, or anything in between. You can change the PAS level on the fly.

[@toetz4491]

Hello.. newbie here.. i just cancelled my order of the bafang in place of the Tongsheng because of the torque sensing qualities.. I have a hydraulic brake.. do i really need a brake motor off switch like the Bafang?

[@mikethomas6051]

​@@toetz4491yes and no, with bafang you can program the motor to stop when you stop peddling, with good brakes no issues. I would look up toseven dz01 and 02, they have made a new mid drive thats like bafangs bbshd but it has torque sensor and cadence sensor.

[@johndoyle4723]

Thanks, I considered both, the main attraction of the Tongsheng for me was the torque sensor, but I eventually chose the Bafang which you can gain access to the software and choose a big range of tuning parameters. I have a 250 watt Bafang to stay UK legal, but you can up the amps to 20 and have a very powerful motor. Thousands of miles so far and no problems.

[@o00scorpion00o]

Probably a better choice because I just fitted a TSDZ2 kit a few days ago and my Gen I Bosch 50 Nm beats it on steep hills and it's far more efficient, hardly gets warm where as the TSDZ2 will be very hot. It's quite safe to say that the 80 Nm rating on the TSDZ2 is complete and utter nonsense.

[@mikethomas6051]

​@@o00scorpion00othat tongsheng was created by some of the team that made bafang but they made loads of design flaws, that's why i stay clear of buying tongsheng.

[@o00scorpion00o]

@@mikethomas6051 Yeah I wish I didn't get the Tongsheng, sure the open source firmware made a difference but it still doesn't give it the power of a Gen I Bosch and it won't fix the loose creaking crank. I ride a 2007 Yamaha T-Max 500 now, lol, never thought I could have so much fun ! I'm a learner and hope to pass my test on it.

[@awakekiwi]

I have a tongsheng on a Merida hardtail mtb. It's awesome. And the community open source firmware is definitely recommended. It's better than any bafang firmware. The open source firmware for tongsheng opens up more power for less battery due to a better algorithm and also many more display options including estimated kms left on battery and peddle power watts vs motor watts etc. Absolutely recommend the tongsheng.

[@LukeLorusso]

Hi! I've read that too. In fact, if you are into firmware mods, tongsheng motors are the way to go! I'm actually planning to make a video on this 😁

[@roy1299]

@@LukeLorusso can't wait for your video of osf

[@twowheelscooter]

How difficult is the flashing process? Where did you learn how to do it?

[@bakadeshi_aunstudios]

THis actually changes the game, because if true, it solves almost all the deficiencies of the Tongsheng. I was almost favoring the Bafang even without the torque sensor until I saw this comment.

[@bradleyemmerson3728]

.... Thank you Sir ....😀👍.. ⭐⭐⭐⭐⭐....

[@kyriakosliotas9272]

Great comparison, i have 2 ebikes, one new fitness with tongsheng 36v 350 Without a throtle and 18-20kg weight depending on the size of the battery and one 20yr Steel 26in... 30kg with a heavy brusless 36v 500w hub back wheel. Tottaly different, one is a helpful normal bike to have a workout (6000km in one year!) and the "tank" as a commutter and more like a moped. The same battery in the tongsheng in eco-1 mode and a little in tour-2 Mode lasts more than double than the other with assist level 1 (80-100w). Greetings from Greece.

[@arisfopalan9004]

I like the bafang.

[@godislove1767]

I need to buy one

[@fatheroffibereconomics]

Great vid thanks

[@MHH3180]

You can use the 850c on the TS. I have built four using it.

[@Tonyplat98]

Overall not a bad comparison. Though I am a speed type of guy and anything less than a BBSHD is just not for me but I did enjoy the video. I am riding around on the surron X bike right now and that's my latest project upgrading it and making it faster overall. Thanks and good luck to you.

[@LukeLorusso]

oh that would be illegal here in europe, wonderful bike anyway!

[@russellplatt5875]

@@LukeLorusso That's because your streets are small and people are every where. From the video the bike trails look dangerous.

[@JK..07]

I have had BBSHD BBS01,2 TO B2 and I can say befang is way better than both tosheng and bosch cos spare parts are easier to get Including tosheng compared to bosch. I'm not planning to change anytime soon.....

[@denseljosephs9500]

Excellent review thanks for uploading I already have a Bafang bbshd and was going to get a tongsheng but I don't like the display

[@03timdol]

You can get several different ones for the Tongsheng (at least 4 that I know of)

[@emiel1976ep]

I have the thongshen, but I also tried the befang. I prefer the way the thongshen delivers power. It reacts on how much input you give, so changing speeds is easier. It feels more natural. I agree with you that there are things missing like battery usage and the amount of power levels. I think that it isn't a problem for most people, but I would love to have it. I expected a longer range with the Thongshen, but I wasn't surten. I think that this mainly comes because how the power is added. With the befang, the motor works more as you just just pedal and don't ad extra force. I didn't change to the custom firmware but it seems to deliver more power and ad some extra info. I am thinking of changing the firmware, but not in a short time. I like the long range. I hope that thongshen will give you an option to change it. That would be great. Overall, both are good and yes the befang looks better with the display, but I would just look ad what feeling you like the most. Display can be changed and firmware change also ads extras.

[@thomasjurd172]

You can do 32 mph on flat no heavy wind on bbdo2b a battery killer but i would advise a 17.5ah to get max power no prdal. In lower pas 3 to 4 80 miles range

[@traviseller3770]

A shift sensor is a needed on a torque sensing system as when you shift you should be letting off of the power anyway and that will instantly cut power through the system because it is a more natural for you. The cadence drives already more jerky, power meaning a shift sensor is necessary.

[@Rob337_aka_CancelProof]

If you wanted to try a third I would recommend the best one of them all, the CYC X1 PRO Gen3 Superior to all the rest 12:34

[@alexbaxter9512]

I bought and fitted a Tongsheng 500w and 16ah 48volt battery. I've just done a 25km ride on a fairly hilly route, mostly in tour mode and the depletion of the battery indicated that I may be good for 100km range, it's still over 50v. Not bad for a pensioner on an old(ish) Decathlon Triban 500, I'm very happy with my new 'bionic legs'...

[@LukeLorusso]

Hi Alex! You made the most energy efficient choice 😃 I have a similar battery for my 750W Bafang and I can go really far with that (didn't measure it yet though since I live in high ground, with a lot of climbs and descents, so the consumption is different) With a 500W Tongsheng kit you cut the consumption, getting the most out of your bike! Enjoy your ride 🚴

[@smallhatshatethetruth7933]

I have a tongsheng and do 60-70 miles a day. I have two 14ah batteries and I usually get 35-40 miles from 1 battery with some charge to spare. I love the simplicity of the tongsheng. There is only one cable going to the cockpit

[@alexbaxter9512]

Pardon me, it's 13ah, and I'm getting 80km per charge (200km so far), I try and use minimum assist (Eco) as I'm trying to improve my fitness, but it's normally quite hilly on my routes. I'm pleased with that.

[@grumpus27]

Both my TSDZ2 with VLCD5 provide a 6V supply for lights which switches on with the backlght. You don't need a shift sensor because the torque sensor detects reduced pedalling force when you shift, which you should do anyway for the health of your transmission (you can't stop pedalling to shift a derailleur, a problem with the Bafang). The chain-stay clamp should be more than enough to hold the motor steady with the single lock-ring. You can set the torque/assistance ratio so the motor applies more power with less pedal force, making the motor kick in sooner/harder. I don't know why you'd need more than four assist levels - .does it really need that much extra fine-tuning?. Throttle isn't legal (beyond 6 km/h) in the UK so no problem there. I will probably build a Bafang mid-drive bike at some point, but I'm currently putting together a hub motor trike, so that will be next year.

[@iamalavalamp]

you don't need brake cut off or a gear sensor for the tsdz2 and you can get built in for the lights for the tsdz2

[@AirbrushDGart]

Thanks for this video I'm actually planning to get that display that your u in on the bafang.. You said something at about 7:40 that the clock freezes is it like that all the time? If I remove battery to charge and put back the battery will the clock be correct?

[@justjordan8018]

I don't know. The Prize tag on the Bafang in my country costs 70% of a cheap brand new Ebike.... unless you find it dirt cheap somewhere it's just not worth it in my case. I rather give 30% more cash and get everything already build on a new bike. But this is a very good video. Totally illegal if the speed limit of 25 kmh is not used in my country. Well thanks for the good video.

[@utubeape]

Hi, great details on your video. I want to convert my Marin from rear hub to mid drive 500W, but it seems that the bottom bracket set is seized and rusted into place, so the only option is to cut off with a hacksaw or angle grinder flush with the frame, then hammer or drill out the bottom bracket. How you describe the locking ring for the motor is important to me - do you think If I have no threads remaining in the bike frame then I can still make the conversion, because it slots through and tightens to its self? The purpose of the mid drive upgrade is for me to load up the bike with camping equipment and go in the countryside, which has lots of hills where I live in South West England

[@tonyoliver4920]

Probably the best ebike mid-drive comparison video I’ve seen. In the uk (& most of Europe) the ebike speed limit is 25kph (16mph) But I don’t understand why the motor is limited to 250W

[@retroke6560]

That's why I find hard daily to respect rules that doesn't respect me.

[@iamrocketray]

I have the Bafang BBSO1B that's the 250 watt model which In the UK is the legal limit. I also have the tongsheng 350 watt(naughty naughty lol). Surprisingly the Bafang is more powerful and in my opinion is a better drive, its also more adjustable, if you get the right lead, you can customise all the gearing and many other things, and you can read your battery charge in the LCD screen. I had bad luck with my Tongsheng from the beginning, I had a faulty LCD and it was impossible to set up. It took 4 months and me paying the postage back to china to get it changed, I have two complaints with it. One the charge indicator is rubbish, you can run out of charge and it still shows full, BUT it does go a lot further than the Bafang on a charge. The main dislike I have with it is the torque sensor, The harder you pedal the more assistance the motor gives, So after a long day out( and i'm exhausted) and I have the final Big hill to climb, I still have to pedal hard to get full power to assist me up the hill even on the turbo setting. The bafang just glides up the hill with me giving minimum input. I hardly ever use the Tongsheng, but I love the Bafang which I intend to upgrade to the BBS02B 500 watt even though its illegal in the UK. I have a trailer on order so I can find space in it to carry a spare charged battery to double its range.

[@musmanov4642]

i bought bbshd 1kw 52v. hope its powerful enough

[@graemewillgress3780]

I have just undergone a similar eBike journey and have both these and a rear hub. I have come to very similar conclusions about the two mid motors. My preference for feeling, as you say, bionic, is the TSDZ2 but I live in a very hilly area and the Bafang BBS01B (250W) handles the hills better in my opinion. Because the Bafang jkust gives what you ask of it it is easier on me in steep terrain. Everrywhere else I prefer the TSDZ2 as it just feels more natural. If I could run a 500w motor it would be the TSDZ all the way although the Bafang has a better reliability record. I have the gear sensor on the Bafang and I find it makes little difference. As you suggest I just stop pedalling momentarily on changes. The TSDZ seems less snatchy when changing, probably as a result of the torque sensor, which I love. There you are more subjective opinion for you to chew over. I should finally add that the TSDZ2 sips battery power in comparison. This is perhaps due the torque sensing again as it gives you a band of assistence for each of it's four levels where the Bafang is either on or off at any one level.

[@GregCornelius-rs6pb]

I'm on the fence with 2 conversion kits 3.batteries I wired up for longer distance more drive time for scooter to see motor work and.determine direction sprocket wants to spin motor where to put.2 twelve volt lithium attach remotely and secure motor on bycicle.what did I get into fasten midrivelooks better than backtire attach ALTHOUGH bike I wanted motor on is one piece pedal crank not 3piece ????

[@degroot50]

When a BBS0*-***W is tuned in software and mode is set to "current" it works like a charm. I tried the TDSZ2 but did not like the torque system, the current mode Bafang was more suited for me also because it has a throttle.

[@asassasasa3233]

CAN YOU COMPARE THE TORQUE SENSOR FEELING OF TONGSHENG AND SHIMANO OR BOSCH?

[@PapayBmet]

Planning to get Tongshen because I think it encourages me to get some workout and exercise with the bike more than the bafang. Do you guys agree?

[@LukeLorusso]

I do: I've chosen the same for my daily commute bike, same reason as yours! The Bafang bike waits for my holidays, even if in certain condition (very steep climbs or strong wind) may require some workout too 😅

[@rahuldasmajumder5121]

Agreed

[@robertallport3126]

I guess it all depends on your personal circumstances, if like me with COPD I prefer the Bafang BBS02 which I used daily to commute with minimal effort over 10 miles each way to work and back for over 2 years.

[@nihilisticsoup2919]

I hope your well man, I have family with COPD and it's no joke I know! It breaks my heart when I see family struggling to get a breath just sitting on the sofa.

[@wattyler5591]

I'm waiting for my tongsheng tsdz2 to arrive. I decided to go for the tsdz2 over the bafang because of the positive feedback of the torque sensor, if it's as good as the Yamaha on my haibike, I'll be most pleased. My next one will either be bafang 1000w or the cycx1.

[@emiel1976ep]

I went for the tsdz2 and I am very happy with it. The Befang that I tried was also very good, but I prefer the torksensor. My next motor will be again with torksensor.

[@pablonoguerales1425]

How was your experience after all?

[@wattyler5591]

@@pablonoguerales1425 Hi, I'm really happy with the motor. It comes very close to the Yamaha pw-se on my haibike in terms of responsiveness and performance, the quality of the motor however is not great, but replacement parts are readily available and fairly cheap. If you're thinking of getting one you won't be disappointed.

[@rkstreeter]

@@wattyler5591 I read about your tongsheng and yamy there and wondering if your still pissed???🤔🤠😆😝🤙

[@rkstreeter]

@@wattyler5591 I'm wondering how to mount a drive straight up in between the two frame tubes seems silly to hang the motor in the forward position to also use as a skid plate?

[@o00scorpion00o]

I got the 850c display does this mean I can not update the firmware ?

[@Alksbbch]

I have front motor and also have big delay like in this video of trotle.

[@michaelrowland6538]

Which is the best? The Bafang is a little more expensive and even so by my opinion slightly better then the Tonshang but all motors have there strengths and weaknesses, the Bafang strength is it is quieter and smoother and hear it encounters less problems and parts are easier to come by, it weaknesses is price its a little more then the Tonshang and the fittings. The biggest problem I have had with the Bafang the securing nut coming lose and motor lowering so could do with a more secure fastening, the Tongshang as a fixing bolt that secures the motor to the frame but where that fits I have a stand fixing there. My advice if you do fit a Bafang motor you can secure it to the frame by fitting the motor with jubilee clips, a jubilee clip aroung the motor then a smaller one through the firs clip securing it to the frame. Ideal sizes 120mm to 140 mm for the motor and 50mm to 70mm for the frame and this will give a stronger fitting to the motor to frame and stop the risk of your motor coming lose. I hope this helps as I find the Bafang slightly better and worth the extra cost and work. Mike

[@MathieuTechMoto]

You can order a USB Cable that you can plug on your phone or computer to fully reprogram the controller including the max amps and each levels individually or change levels from speed limit to current limit on the Bafang

[@LukeLorusso]

yep, sure thing! checkout the new videos 😉

[@zakazfajcit1314]

Hello Luke, thank you for this useful vid! Can you answer to me, with which motor is possible to ride using less cardial work? I've got very serious heart failure, that means im able to walk mid-speed continously, but riding a normal bike is too much. I tried it, i ran out of power and oxygen after 2 km. So as I understood well the Bafang set would be better for me? Thank you!

[@LukeLorusso]

you got it right man: the Bafang kit is the right one for you! the 500W at 48V motor will allow you to install bigger batteries, and if you buy a 48V 17Ah one you'll be set. in case you have a lot of steep climbs on your way, you can think about the 750W version :)

[@ahmesceanga6382]

Does the second bike really have more torque than the base Renault/Dacia Logan ?

[@alqua3294]

Complimenti molto esaustivo,io vorrei trasformare una delle mie due mtb per andarci al lavoro ma anche per divertirmi,dopo i tuoi video sarei orientato su un tongsheng da 500 o 750 devo fare 40 km e ci sono parecchie salite.l unico dubbio che ho e che le mie bici sono full e nel carro posteriore non c e quel trapezietto dove andrebbe il cavlletto cioè quello in cui tu fissavi con una staffa il motore per nn farlo muovere,bastera solo stringerlo li sul movimento centrale secondo te prima che faccio la spesa?

[@alessandronunnari2329]

Ciao Luke, complimenti per il confronto. Avrei una domanda, è possibile installare il motore bafang senza lo schermo e il sensore di pedalata? Solamente con l’accelerazione per intenderci..grazie mille per la tua disponibilità!

[@LukeLorusso]

il sensore di pedalata è incorporato nel motore... potresti non installare le leve e i pedali, ma poi devi trovare un altro appoggio per i piedi xD Poi esistono interfacce piccole laterali, come il 500C, ma senza interfaccia non puoi accendere il motore...

[@jonfairway8235]

15MPH limit is for UK ... it is maximum in UK allowed :)

[@GTGTRIK]

There's custom firmware for Tongsheng that improves it drastically, but that requires some elbow grease to install and a different screen unit.

[@InfiltrateIndustries]

You don’t need a new display for the custom firmware, though it givea you more readings

[@noobulon4334]

Does anyone know if the open source firmware for the tsdz2 fixes the throttle?

[@michaelgower8577]

Thanks for all of your comparison videos between the Tongsheng and Bafang. On the Tongsheng, will the motor carry you at 20 mph or 32 km/h on throttle only? I like the torque style better but want to make sure it has enough power on throttle only a day the end of a ride at the end of a long day.

[@LukeLorusso]

sure, 32kmh is simply reachable throttle only :)

[@DFX2KX]

Mine does *about* 20 if you give it enough time to get there and pick the right gear. Even with 210 lbs me, heavy-ish Walmart bike (Schwinn Aluminum Comp), and a rack and backpack full of groceries. It definitely complains about it, though.

[@marcobono3619]

Ottimo video io ho il tsdz2 da un paio d'anni e sono molto contento. Dovresti solo sottolineare che entrambi i motori da testati non possono circolare in quanto il trottle è vietato il limite di potenza è 250 w. Marco

[@LukeLorusso]

Ciao Marco, grazie del feedback! Se guardi nei commenti ci sono dei warning pinnati per l'Italia e per la Francia. In altri posti nel mondo, invece, essi sono assolutamente legali

[@giovannimagrelli2750]

Ciao Luca, video molto.... mooolto interessanti e ben fatti!!! Ti volevo fare una domanda alla quale tu, che li hai provati entrambi potresti rispondermi. A priori sceglierei il primo perché il sensore sulla coppia mi piace di più..., ma il bafang mi .... intriga di più... La domanda è: " se il bafang, impostato su un intervento basso di assistenza, possa sembrare che intervenga sulla coppia." Grazie

[@LukeLorusso]

Ciao Giovanni! Il sensore di coppia non si può "simulare". Interviene diversamente. Il bafang a basso livello di assistenza fa così: spinge più che può all'inizio e poi ti tronca alla velocità predefinita. Da quel momento è solo gambe! Se il livello di assistenza è medio arriverete più o meno a spegnere con la stessa grinta (ma non proporzionalmente); se spingi meno fa forza il motore, se vai forte tu invece si placa lui. Ad alto livello, praticamente tu fai finta e il motore fa tutto da solo. Col tongsheng tutto ciò non esiste. È tutto proporzionale, sempre. Ma questo significa che per alte velocità devi sudare! Cerca semplicemente di capire per cosa vuoi la bici: esercizio e naturalezza per il tempo libero? tongsheng; spostamenti regolari con poca fatica: bafang

[@davidtaylor7491]

Thanks for the comparison. I've just added a Tongsheng motor to an Apollo front suspension hybrid but haven't ridden much due to our wet and cold winter here in Melbourne! I'm looking forward to the weather improving so I can try some longer rides. The open source firmware project for the Tongsheng was a factor in my decision.

[@AndrewGloyns]

How has it been now that we've had a *few* sunny days....? Did you flash the firmware?

[@ipodtouchtony6027]

how many range in km do you make in tongsheng ?

[@Rob337_aka_CancelProof]

I recently learned all Tongshen mid Drive kit use the same exact motor the only thing that's different is the firmware what you can change with the USB interface that you hook to your computer which I'm sure isn't something they want all potential buyers to know about but that's not my concern so I say modify the firmware overvolt it and give it hell 😊😅😂

[@andreavolpe86]

Bafang Top 😉

[@francisleesc]

👍👍👍👏👏👏Thank for the review. Can you tell us which one is noisy.

[@LukeLorusso]

Hey there! In reality none of them is noisy, the very little noise you got at high speed is covered by the wind Judge by yourself: kzbin.info/www/bejne/aGfciICMZ55rrqs kzbin.info/www/bejne/rX6tm4yme5WCi8k

[@francisleesc]

Thank you!

[@superelectic45]

I think you prefer the Bafang a little more than the Tongsheng ;-)

[@bjnslc]

I have a BBS02b on my retrofit. I dislike the onset of power pedaling doesn't feel natural. The Tongsheng's torque sensing sounds nice, but the downsides look numerous. I've been considering a CYC Stealth motor, but it's too expensive and there are too many quality-control issues for me.

[@LukeLorusso]

I totally agree with you man... In the future I will share some settings for the BBS02B via the programming tool that should make it a little bit more confortable Maybe it will help you too

[@fajarjarjarbinks1946]

hi luke, i wanna know is the tongsheng with a torque sensor really need a brake with cutoff sensor?

[@LukeLorusso]

my short answer is yes :) my long answer is kzbin.info/www/bejne/gYvVeKmdacR-fpI

[@JohnHoranzy]

Luke, Thank you for making this excellent video. Is there a noise difference between the two motors?

[@LukeLorusso]

Thank you for your interest! 😊 The Bafang motor is really quiet! The Tongsheng is maybe a little bit noisier, but nothing that can distract nor disturb you 👌🏻

[@JohnHoranzy]

@@LukeLorusso I found a video of the Tongsheng noise along with video of disassembly. The noise appears to be from improper face form cut on the gears. Gears are very complex in their tiny details. Tongsheng apparently fails to QA their outsourced parts or they do not understand the fine points of their gear train design. I ordered the 1 pound heavier BFS02 750 Watt unit and 48V 20Ah battery for the mountain I live on. I think this will be a more reliable motor though I would prefer a torque sensing unit. I probably see only 3 cars on my evening rides and I also am able to sneak up on deer along side the road. Quiet is very important to me.

[@LukeLorusso]

@@JohnHoranzy I see your point. For my personal experience the TSDZ-2 doesn't sound noisy, but I will surely upload a video with the microphone next to the motor, in order to better explain it! You ordered a super motor 👍 just be aware of the more intense tyre consumption (especially the rear one) and battery drain

[@JohnHoranzy]

@@LukeLorusso Hi Luke. I got my BBS02 installed on my Mongoose Gravel Bike with studded snow tires. I take it out in the evenings and in the deeper snow covered roads, it is absolutely silent. A bright Moon, and white snow covered fields and trees. The whine of a gear box would be so out of place in the surreal quiet of these forests.

[@LukeLorusso]

Hi @@JohnHoranzy, I can see that wonderful picture through your description! I'm very glad that the motor fits your needs; after 1500km I'm stiil very exited each time I use my bike with the BBS02b

[@clementa9432]

Did he say the Baafang was faster? How is that possible when the tongsheng is a 750W motor?

[@michaelsprinzeles4022]

With the programming cable you can program the PAS and throttle to allow full speed regardless of the PAS level. I also have a BBS02 (750 watt) and mine is programmed that way. Unfortunately there is a glitch that makes PAS cut out when you hit the throttle and then the power comes on full blast. That required me to stop pedaling before applying the throttle or risk wheelies. I finally solved the problem by removing the throttle;)

[@LukeLorusso]

hope to make some programming myself too! 🤞

[@michaelsprinzeles4022]

@@LukeLorusso Mine came programmed to reach top speed regardless of assist level. I programmed it for lower amps so I'd get more range from a 6AH battery. Also lowered the % of assist in the lower PAS levels because it started at 30% in PAS level 1 which was unnecessary. Now PAS level 1 gives 10% power which is more than enough for slow moving around pedestrians. If I want 30% I just up the PAS level to 3 (of 9) now.

[@LukeLorusso]

@@michaelsprinzeles4022 very interesting! question: can you still choose to have 5 customizable levels of assistance instead of 9? Thank you for sharing your experience 💪

[@michaelsprinzeles4022]

@@LukeLorusso Sorry I didn't see your question sooner. Yes, you can still choose the number of assistance levels. Note: if you change the number of levels the settings for level 9 are still the highest, with level 5 being the middle and 1 the lowest (while still getting assistance) so while programming assume the full 9 levels of assist and the motor will make the corresponding adjustments when you choose how many levels you want on the display. For example set all 9 levels while programming then on the display set the number of levels...the motor knows no matter how many levels you select that level 1 will be unchanged but the middle setting, no matter the displayed number, will correspond to level 5 in the programming and the highest setting, no matter the displayed number, will correspond to level 9 in the programming. With 3 levels of assist the display level 2 will be the programmed level 5 and level 3 on the display will be the same as level 9 in the programming. If you choose 5 levels, 1 is still 1, 2 on the display is like 3 in the programming, level 3 on the display is like 5 in the programming, level 4 on the display is like level 7 in programming and level 5 on the display is like 9 in the programming. With the programming cable (and software) you can also change the amount of power in each setting. Hope that's not overwhelming. It's simple once you've done it. Ride on & enjoy;)

[@LukeLorusso]

@@michaelsprinzeles4022 fully understood, was the doubt I had, so hard to articulate but you answered straight! 👌 thanks man

[@SupraTompan]

One thing I'd mention, is that the Bafang is dead quiet compared to the noisy tsdz2

[@thomasgrandi157]

Ciao, ti volevo chiedere se con il motore Tonghseng la pedalata è realmente libera a motore spento? Oppure c'è una piccola resistenza?

[@LukeLorusso]

Io usavo regolarmente il Tonghseng a pedalata libera, quando uscivo per dei giri con la mia compagna. lei ha una bicicletta normale ed io per restare allo stesso livello lasciavo la batteria a casa. Per me è largamente libera, forse non identicamente libera quanto lo sarebbe un blocco pedale classico, ma se come me parti in prima marcia non sentirai alcuna resistenza. spero di aver risposto alla domanda

[@itekani]

Is there any chance that any of the auxiliaries used for Bafang kits also work with Tongsheng? I converted my bike with a Bafang BBS02, but would like to try a Tongsheng. Do I have to change everything? The most difficult part is my magnetic brake sensors that are epoxy glued to the handles. 😄. The most expensive is of course the battery.

[@LukeLorusso]

nope man, sorry... battery aside, everything else has different plugs. Also the cabling system itself is totally different

[@colincampbell4261]

Thanks for video and info. Totally agree about the tongsheng throttle cutting power when pedaling. Is there a fix anyone?

[@LukeLorusso]

Hi there, thank you for watching! I think with a firmware mod you should get rid of it, I'll make sure to cover that next year ✌

[@LukeLorusso]

@@kevinshort3943 the throttle is there exactly for that reason. Since a mid-drive motor is a generic-purpose motor, you could eventually build a motorcycle, than go to the motorization office, follow the legal steps and legalize your diy motorcycle with a licenseplate and all! That's absolutely possible and that's the reason why the throttle is present

[@davedzone]

@@kevinshort3943 By your logic, why put an electric motor on a bicycle? It's BECAUSE WE WANT IT TO BE DIFFERENT. Throttle gives you the option to do what you want with it. You can just cruise around on electric power.

[@saber1epee0]

Setting the speed limit (and the pre-set on/off) is for Legal reasons in some places. If an EBike can go over a certain speed in my city, it is classified as a motorcycle and you need to register it and get a special license. To avoid this, you can prove to a police that you are using a speed limiter

[@mikethomas6051]

If the tongsheng has torque sensor shouldn't that apply added power only needed so it would make the battery last longer, the bafang drives its power constant levels and cuts off at speed limits on each pas level.

[@bumbarabun]

Thanks for the nice review. I have Bafang and I am very disappointed with their assistance implementation, one thing it pushes too hard, but worse - speed is too high. For example mine on L1 assist pushes to 12MPH witch is way too high. And worst thing it is not adjustable. I found that some makers for the same display 680C has settings to set power limit and speed limits for assistance levels, but Bafang decided you do not need that. Terrible decision. Note: if they make it too slow/weak that would be annoying at most, as you can just skip to higher level of assist. But other way around is really terrible - level 0 is not assist and level 1 is already too high/ and there is nothing in between.

[@LukeLorusso]

all of that can be customizable! stay tuned cause one of my future videos would be about how to make it "less strong"

[@bumbarabun]

@@LukeLorusso I do not really see how it can be customized without tweaking firmware, which leads to loosing warranty. But I would be glad to be mistaken.

[@sebastianmusic6205]

Agreed the Bafang factory settings for Power delivery are terrible, however an app called eeebike will allow you to plug into controller and custom tune them. It transforms how the motor behaves