Cool idea from the old HUB !

Cool idea from the old HUB !
I welcome everyone to my channel! My name is Dima - I'm the author of the Men's Craft channel.
I am fond of tools, as well as doing unique things which cannot be bought in the store.
Subscribe to the channel, it’s really interesting here !!!
#craft #wood #diy

[@menscraft7985]

Do you like this idea friends?

[@robfra7860]

Yes i like that

[@MuhammadDaudkhanTV100]

Cool 👍👌💯🌹❤️

[@agguilarmetalwork4494]

Outstanding design, thanks

[@ericduncan7421]

Pretty good idea. Need to work on your welding though lol I know it’s not for looks but that wasn’t bad fabrication.

[@rootloggins3951]

Any ideas for a backsplash or back wall maybe removable for big projects maybe hang tools from it like a peg board set up?

[@elguapo3527]

Man, that is one hell of a good-looking, life-long lasting masterpiece. That thing will still be around in 500 years. Excellent idea and job.

[@lovetofly32]

I see and issue. I know its a junk hub but hooking the ground to the main part of the table then welding on the turntable forces the the electrical current to travel through the bearing and arc the rollers or balls in the bearing. It might get stuck or really rough to turn over time because its going to destroy that bearing.

[@pcicraftsman8472]

Oh man I need that table so bad it would drastically improve and make welding so much easier and enjoyable. I've been trying to figure out how to make my own searching for ideas and this is by far the best I've seen. Excellent job sir👍👍

[@759NPR]

So I'm a woodworker of 30+ years, the initial picture piqued my interest. I started to watch thinking, "this is gonna be a pretty slick man-cave-barbque"... I'm waiting at the end to see how you're gonna "roast" the meat with serious heat, then.... DOOOH !!! It's a wielding table... Dude brilliant ! Makes me want to add metal work to my skill set. Awesomeness - thnx, job well done young man. Big fist bump

[@jasonwysong7625]

Genius. Hell of a nice weld table. Outstanding job.

[@JR-gc8el]

I wasn't sure what you were building but when I saw later I thought how awesome because I need a welding table like that!

[@user-fn9nm5xk9w]

Ну что за мастер!!! Смотрю и диву даюсь!!! Как в моем доме нужен такой!!!!!!!!!👍👍👍👍👍👍👍💝💝💝💝💝💝💝☀️☀️☀️🌸🌸🌸🌸

[@jeffreyhill3960]

Be sure to land your ground clamp on the turntable, otherwise the bearings won’t last too long

[@horsegizmodisney4188]

With a single point ground like that, you will fuse the bearings doing any welding. The table will no longer turn. Also, consider the tubing wall size. Depending on what you weld on it, the table top will not last to many years. You also, when using DC welding, are going to build a magnetic field that will pull your welds around over time.

[@alablksnakelonghalfpintowh4038]

This was my military occupational skill in the marine corps in 1980. This guy is impressive.

[@afghanj1381]

I'm a carpenter and don't know shit about metal work but that table makes me want to

[@georgestam1710]

I'm carpenter too but i have a simple stick welding machine... I've built and repair many things,for my work,house or car...best 150 euros I've ever spent... You should buy one too mate

[@afghanj1381]

@@georgestam1710 yea, I think I will. I've seen a lot of wood and metal projects lately that I'd like to try

[@ralfie8801]

Don't forget the pine welding electrodes! 😎

[@heregulmithal7063]

My thoughts exactly.

[@umgusastar]

Very very clever idea for welding bench

[@SJ21608]

Genius! Fabrication skills surpassed only by video skills, no music, no chatter just action .

[@bujin001]

Best table I have seen so far.

[@tsv9264]

Люблю поизвращаться, а особенно без дела не седеть! Супер! Давай в розничную продажу изделия свои!

[@everready19373]

A bazillion extra bonus points for no shitty music. Well done sir.

[@menscraft7985]

Thank you for appreciating our video!

[@Doobster67]

VERY VERY COOL! Great work there!

[@allenmckinney9533]

The only thing I would've added would to use a bearing with the hole for a cv axle so a motorized shaft can be used. Nice build either way.

[@menscraft7985]

Good idea!

[@inlinefourtr]

All that from an old bearing. Pure magic.

[@petermapp5988]

This table is maaad craaazy good

[@TejasToolMan]

Pretty darn trick idea! All I made was some air & water hose reels with my old hubs & used 2 others for heavy steel gate hinges

[@JoseRodriguez-oc5xo]

Great job amigo I need one like this in my garage I start making one this week larga vida a ti amigo gracias por este video saludos desde Colton California.

[@maxgernand4321]

As was mentioned by a couple of others, electric current should NEVER run through the bearings. The contact probably will be poor as well as arcing at the bearing balls/cylinders, which will damage them. It may not cause an issue for you, but as a 40 year auto mechanic instructor, we knew we had to replace bearings if a student grounded a welder at the axle end while doing any welding.

[@petersack5074]

ABSOLUTELY correct ! ONE, must ' think ahead'' when deciding, on DOING ANYTHING, in the shop/garage. Especially when it comes to anything ELECTRICAL.

[@rayvillarreal6646]

This chick has got skills... That's a cool welding table.. from scratch..

[@drsoot9760]

Fancy welding table! Nicely build!!! 👍 Not many folks wear there PPE while making videos. 👍👍 I think I even saw a breathing mask.

[@davidswimsr.8343]

Excellent! You are brilliant. I don't have the access to tube steel unless I purchase new from steel distribution. I think this table IS PERFECT for home or small business. Thanks for sharing ! Appreciate it friend.

[@guygutierrez3037]

Excellente idée et belle execution....

[@donaldemminger2349]

nice. don't care what you call it, it's a dam nice fabrication bench for welding

[@MuhammadDaudkhanTV100]

Good 👍👌💯💯

[@kentieber7309]

Very cool features

[@benjaminkline4855]

Bearing don't last long when you arc thru them. The welder doesn't start well either.

[@WW5RM]

Yeah my thoughts exactly! Bring the ground up to the part. Otherwise the bearings will freeze up!

[@Gears.and.Gadgets]

Very clever. Thanks for sharing.

[@menscraft7985]

Thank you! Glad to be of service to you!

[@stevepellew8021]

Brilliant and useful...

[@craftzars]

So welding earth goes through bearing 🤔 soon bearing balls will not be so round anymore. But i like table!👌

[@burnerjack01]

That was my very 1st thought (right after "I'm glad I always go to the last 30 seconds and view that FIRST.").

[@randyslone5706]

That could be fixed by making a contact brush underneath for the electrical path.

[@philmachineman8927]

I built one of these from a shaper bull gear & housing. Intended to add a grounding brush, but never did get to it. Litterally hundreds of arc/hours later, up to 300 amps at times, sold it, it now has hundreds of hours more. No arc pitting what so ever.

[@philmachineman8927]

Uhh. No. No failure. And the brush idea IS whats inside a "store bought" positioner. Usualy a heavy braid around a shaft or pushed against a face.

[@ZEUS-eg8jw]

@craftzars - 👀 ... 😎!

[@markhanson8366]

So good! TY for demonstrating

[@scamp7441]

I think you did great. Welds are fine for what you were building. Cool idea also. Gave me an idea about putting a bearing under a fire pit for a rotating pit.

[@peterwait641]

Looks like a bit of weld porosity, gas flow might be a bit low or oil on metal, good design and video .

[@gordonbrown9382]

Not just the best table, but the best idea I've seen in ages. Well done.

[@raulaguirre71]

Man!!! I like your job!!! Grettings from México.

[@JustMe-ku6rk]

Sweet project. Who wouldn't love to have one.....

[@menscraft7985]

Gracias amigo

[@lineman55]

best table design yet!

[@jayone7437]

Now that’s an awesome build. So functional.

[@joaquinsablan5406]

Out standing Job!

[@tomasarguinzoni9022]

Very cool idea 👍🏼👍🏼👍🏼👍🏼👍🏼

[@johnnelson9309]

OUTSTANDING, you show off.😃

[@glenturney4750]

Not bad, not bad, however, you shouldn't have put your welding pistol holder where it allows the wire feeder so close to the edge, 'cause somebody, or something will ALWAYS come walking by and hang up on the wire and bend your welder pistol and it'll break. Also, should've elevated the spinner table a bit higher, whereas if your project over hangs the spinner table, it'll be harder to rotate it, 'cause it'll hang up on the rest of the table outside of the spinner table. But over all, I'd say that this is a pretty cool idea. 😁👍

[@patmason7276]

Love when I used to weld amazing the things you can come up with. Cool table.

[@menscraft7985]

Glad to

[@Xander-px2ir]

Great vid. This video shouldn't have any dislikes. I don't understand why good video get dislikes.

[@budboggs4193]

That is one awesome welding table. .

[@leoneldelgado271]

Nice & smart.....!!! I will copy those side hinge drawers you add to your table👍🏻🇵🇪

[@RoadWarrior-lo9vt]

WOW.. you can get some serious bucks for that table. Nice!

[@alfonsocruz2412]

Ñu0

[@ericalmberg9022]

Man that's awesome. Really nice clean work. And a wonderful welding area. Smart turn table too. It's got everything you could need. Really nice work.

[@TheJohndeere212]

fantastic idea

[@barrylitchfield250]

Just a couple of words like "welding table" in the title would be helpful to let viewers select the videos they'd like to watch. I'm not a metal fabrication guy, but I watched your video through to the end. I pick up ideas and tips from every video I watch. Yours included. Thanks for sharing!

[@grumpyg9350]

Need a rotary table ground. Fun to watch👍👍👍👍👍

[@patrickcarney9474]

Wonderful idea. I have been a welder for over 30 years,... excellent idea and it’s simple

[@ghostrider.13]

Excellent table to weld parts on. I can see the usefulness with that build.

[@bottmar1]

I like my welding table that tilts since it is attached to an engine stand and has wheels so it can be wheeled away from the wall. Some welds are easier to do vertically or at angles. I did like the version shown here though.

[@martinhogan5970]

Awesome. And therapeutic

[@catchup3623]

A wooden welding table??? Huh??? OK,,, OK,,, so now you got a cool welding table ;-)

[@rlachermeier]

Like the idea of the swing drawers

[@georgeyoung613]

Brilliant idea

[@martinp8889]

Some linseed oil on the bare metal will dry over time and stop it rusting. Good job.

[@eCitizen1]

I love your table, and I want one! ":)

[@JediMasterVega]

I've got a cool idea for a light bulb... Build a skyscraper and put the lightbulb in one of the offices. Fantastic project, though! If I welded more and had all this material, I'd make one for sure. You can also light a fire underneath and grill on it!

[@joseantoniogomes9248]

Muito bom gostei 👍 Chow de bola parabéns

[@micjam1986]

that's a beauty!! My welding instructor made a similar table but he had a foot disc that he used to turn the table.. He resurfaced drilling bits for some side work..

[@railmaker]

Great idea and good build. I would question the grounding through the bearing, though.

[@shanester2594]

I figure it will arc through the bearings and get gritty after a few uses.

[@Z-Ack]

Wheel bearings are not ball bearings. Theyre tapered roller bearings which have 100x more of a contact pattern over ball bearings. They use roller bearings over balls due to the shearing forces applied to the wheel when turning the wheel as ball bearins are only deigned to handle lateral forces, a shear force would be like trying to remove a bearing by its center race which if anybodies tried knows it will fuck up a ball bearing quick as shit.. but with the amount of contact that the rollers would have, if a conductive grease were packed in and used like graphite it would greater increase the contact area and the work would be more likely to arc to the table than through the bearing.. especially with a wheel bearing, theyre usually jam packed with rollers on those bearings to maintain that clearance so shit doesnt wobble..

[@mikldude9376]

Masterfully done sir ! very cool indeed .

[@HuskyFlocke]

My english is not the best. But i can say Thats a masterpiece... I watched 10 Videos making a Tablet for welding. And there we're Always baisic. I never thougt about Something Like that. That blows my mind. That masterpiece would cost over 3000$ Here in Germany

[@magwamagwa45110]

awesome welding table just need a vice on one end and it is complete very well thought out 10 thumbs up....

[@RK-fp7ob]

Now thats a cool idea !!! im going to copy that.... ;)

[@hertzbros5873]

This is like saying "Cool idea for a tire" then building a dang car and puting the tire on it!

[@Bnick2009]

Hahahaha

[@Laffy1345]

Dang😂😂😂😂

[@owenwalters7186]

great video, looks great , small bit of advice when MIG welding ''push'' the weld pool away from you, as pulling the gas doesnt shield as well, thanks for the upload

[@menscraft7985]

Thanks for the advice I will definitely consider

[@owenwalters7186]

Men's Craft no problem thanks for the upload , what a great idea it is

[@burtonkidd]

Unless it's FCAW not SGAW 😏

[@owenwalters7186]

burtonkidd fair point , I just seemed to hear gas from the torch

[@nollid006]

Whoa... All that from an old bearing? What dark magic is this?

[@theGADGETSplaylist]

I would add a thin safety band around that rotating table. If fingers get caught between the rotating slots and the stationary ones, they're gone! Other than this criticism, great job on the table and the video production.

[@markholmgren3697]

Nice welding bench

[@TD-tb5xk]

This guy is CRAZY! In a good way outstanding👍🏿

[@gilmaramorim6530]

Esse cara e um exímio artista, PARABÉNS.

[@bradmc6182]

That's the best welding table ever

[@pilowtop7077]

Realmente impresionante.lo versatil de esa mesa de trabajo.impresionante y de paso vi el porta torcha.yo tengo el mismo pero mas grande y a veces me gatilla la torcha hasta eso aprendi.de achicarlo eres 1 maestro.gracias y bendiciones

[@paulvanreenen6986]

Very cool. Old water pump could work too!

[@kkkoha1]

From the bearing)))Yes it turns out that you can make a spaceship out of a nail)))

[@dedomv11]

It's a good idea but if you're grounding on the bench and you're running power through your bearings your arcing across the bearings. Those bearings won't last too much longer.

[@Richard-gy1fo]

Your Badass. Thats the best welding table ive seen

[@rs6383]

Splendid idea I must say. Spinners are winners. 👍👍

[@davidk1579]

Very nice.

[@SuperAwesomeGarageTime]

Awesome! I need to build myself a table too! Maybe I'll make a video on my channel of this! Love it!

[@davidduarte5218]

Very nice !

[@omgoen1367]

I LIKE your equipment

[@thejanzenfamily3236]

Great work bench. Only thing I saw was, you're welding backwards, never pull the gun, push it, that's why your weldings look so bumpy. push the gun ahead, with the welding, at the same the material is warming up ahead of the weld and your welds will look nicer.

[@petersack5074]

@@5185154 ? hmm....cant find 'er.....then just grinder......one of those days......

[@dougwhitt68]

EXCELLENT table.

[@manuelolivares1983]

Very.good 👌

[@davehoward2791]

I think I just found my next project. Awesome build, thanks!! 👍

[@menscraft7985]

Thank you for appreciating my work!

[@lindsayrixon7402]

👌Top shelf ✅

[@marioalanis1855]

Badass welding table

[@sr972]

Great idea very creative. If you made an effort to learn how to weld good you could save alot of grinding time.

[@kenmanx1298]

Okay, I will make a couple of these tomorrow morning! No problem! 😜

[@firmansyah-rd9hu]

Incredible ! I love it.👍👍👍👍

[@menscraft7985]

thanks

[@kerlnicklows4939]

Fantastic!