Man, wish I knew how to fix my car and diagnose just like you.
@CoolAirVw9 ай бұрын
ah shucks. Move to KC and come to work here. I'll teach ya a thing or two.
@johnnygiblets43952 жыл бұрын
I live in the KC area. I think I just found a new awesome VW mechanic. Thanks for posting the great video.
@CoolAirVw2 жыл бұрын
get your giblets out here!
@HotTakeAndy Жыл бұрын
“I don’t trust the dealership.” This is exactly why I try and take my car to a guy like you. My car is in the shop for this right now; misfires both on 2 and 4, and it chokes so bad at idle, like it’s suffocating. Replaced spark plugs, wires (because as you said, someone worked on it and didn’t know what they were doing and broke the tabs) and ignition cores. I have close to the same mileage as this car, so I wonder if this just part of the wonderful repairs that comes with age. Thanks for the video.
@CoolAirVw Жыл бұрын
broken tabs on the cores. (coils)
@HotTakeAndy7 ай бұрын
@@CoolAirVwhey.. guess who’s back? Meeee. EPC light this time.
@rickt8325 Жыл бұрын
Man u sure do know ur stuff, I enjoy watching ur videos just to learn, u r very informative and direct, love it, thanks!!!
@CoolAirVw Жыл бұрын
ah shucks... thanks.
@insideridin13763 жыл бұрын
You are a genious! Im impressed with your knownledge and skills. Looking forward to watching part 2. Keep it up!
@CoolAirVw3 жыл бұрын
part 2 is up and available.
@TrellaMs3 ай бұрын
That's a good mechanic. Well done, sir.
@uzzuzz93202 жыл бұрын
2009 Tiguan cylinder 1 3 4 still having intermittent misfire after changing all plugs and coils. It happens sometimes when accelerating it kicks back.
@CoolAirVw2 жыл бұрын
check fuel trim and trouble codes.
@kimtutorials31162 жыл бұрын
Could be fuel injectors?
@CoolAirVw2 жыл бұрын
@@kimtutorials3116 yes, but you could list off a dozen things that it "could be".
@HotTakeAndy Жыл бұрын
This is exactly what I’m going through right now. You get everything worked out?
@uzzuzz9320 Жыл бұрын
@@HotTakeAndy yea it was a kinked wiring harness very weird issue but a master tech figured it out for $100.
@thrasher3053 жыл бұрын
Good stuff and very informative. Hard to find channels on technicians who do Audi/VW. Subscribed.
@CoolAirVw3 жыл бұрын
thanks for subscribing.
@kpuco011 Жыл бұрын
Hello. I liked the video and the easy explanation you have made on the issue. I will allow myself to ask a question - I have an a4 b8 with the cdnc 2.0tfsi 2009 engine. I have a similar problem with P030200 P030000. The problem occurs only when the car is idle (under 1000RPM), once the RPMS exceed 1000-1200 the problem stops and the car runs without issues. So, when the car is idle the whole vehicle shakes and you can even hear the misfires from the exhaust behind the car. The only errors registered were the 2 mentioned above and nothing else. As far as I know the chain is ok, the injectors are new, the plugs were changed, the cylinders and the valves are fine (or so I am told), there was a repair done for the issue with the oil consumption on these engines (the head was opened again after that to check if everything is ok, they told me everything is fine), there is no carbon build up on intake valves. I have tried the official dealership and other high end car services, they all can not locate where the issue is, so here I am. Do you have an idea on what can be the cause or how should I proceed?
@CoolAirVw Жыл бұрын
its not easy to diagnose bad guides that have failed in the way that this engine has. It would require in cylinder pressure sensor with an oscilloscope, and even then you would have to have advances skills to know what your looking at. I certainly dont claim that. The ones like this I diagnosed through process of elimination.
@josesaldana8058 Жыл бұрын
amazing video, sir, thank you.
@CoolAirVw Жыл бұрын
thanks. !
@ShaggyCrew8711 ай бұрын
Excellent video!!!
@CoolAirVw11 ай бұрын
thanks
@Wolfnap313 Жыл бұрын
Did you replace the rear main seal yet?
@CoolAirVw Жыл бұрын
On this one? no. Lots of others. Diagnosis of rear main seal is usually pretty cut and dried.
@saraachtmann77112 жыл бұрын
Our 2016 Tiguan in the shop.. they said the only way to find the issue is to open the motor.. if it’s something wear and tear is not covered under extended warranty .. 😭😱.. cylinder 2 has 0 psi .. the carmax preferred mechanic said it’s like rolling dice.. also said it’s a common vw issue.. the most expensive Gas has always been used n all the services up to date.. it’s nerve wrecking… the sad part we still owe 10G on it.. hoping for it being under warranty so we can fix and trade it in.. this car should be banned from the states if it’s a money pit..
@CoolAirVw2 жыл бұрын
sorry your stuck in this situation.
@saraachtmann77112 жыл бұрын
@@CoolAirVw thank you.. they opened the motor n said it’s a bent spring… not sure how that happens.. but they want maintenance records for the car .. we got lucky except for the deductible but 500 better than 5G… 😅
@CoolAirVw2 жыл бұрын
@@saraachtmann7711 awesome!
@kimtutorials31162 жыл бұрын
@@saraachtmann7711 deductible? Did the insurance pay for it?
@JimmyLucas-ev1hp Жыл бұрын
Dude I am having the same issues AGAIN on my tsi. Absolutely fun to drive but would not recommend buying this car unless you are rich. And if your filthy rich buy something better
@theavlab4 ай бұрын
Hi do you find the problem? There is a secord part? I would like to know if this was a valve gasket problem?
@dmcdow3 жыл бұрын
Great video, Richard. I'm looking forward to part 2.
@CoolAirVw3 жыл бұрын
thanks for watching.
@SergioHernandez-bl3yl2 жыл бұрын
Good explanation! I have a 2011 VW CC with the code p0300 I’ve already changed camshaft and crankshaft sensor as well as mass air flow sensor and coils are good I don’t know.
@CoolAirVw2 жыл бұрын
crankcase vent, rear main seal, injectors, carbon build up on intake valves.
@SergioHernandez-bl3yl2 жыл бұрын
Can’t get no one in my area to do relearn procedure for crank and camshaft sensor and when I tell some mechanics they’re like I’ve never heard of that so I guess ima just trash it!
@CoolAirVw2 жыл бұрын
@@SergioHernandez-bl3yl this Vw Tiguan doesn't have a "relearn" procedure, so your "some mechanics" are right. The test done in this video is for testing and diagnostic purposes.
@kennethking23012 жыл бұрын
In some models of VWs, a bad injector wiring harness will cause a P0300 usually accompanied by P030X (X = cylinder # that is misfiring). I am not certain about your CC. Unfortunately, on the EA888 engine, the injectors live underneath the intake and you may have to remove the intake to test the wiring harness.
@alfredschmidt36593 жыл бұрын
NGK's are by far the BEST plugs on the market. If you've ever had trouble with plugs fouling due to worn engine; NGK's will last 10× longer at least.
@CoolAirVw3 жыл бұрын
thanks for watching and commenting on my channel.
@bobbygeorge22612 жыл бұрын
Awesome video very in-depth 👍👍 So I bought a NO CRANK NO START 2011 Tiguan that’s throwing a bunch of codes P0299-P304 and P12A2 P0507 & P2187 and pending codes are Pretty much all same plus P0016. I tried manually cranking the motor a couple small turns but W/O a lift it’s tough to get in there. Do you have any good advice for me I’m trying to figure it out myself.
@CoolAirVw2 жыл бұрын
If the p0016 reoccurs I would worry its out of time, meaning major engine damage. If it jumps time and the pistons smack the valves it has no compression. That engine usually damages all the exhaust valves. You can hear a lack of compression because the engine cranks over super easy. You can identify this with compression guage or with boroscope through the spark plug holes. Watch the following video. kzbin.info/www/bejne/nHzRZoGng7dqipo
@elias1995ish Жыл бұрын
Can carbon build up cause misfire on cylinders and rough driving at low rpm? Also epc and check engine light? It all started with cold start misfires but car drove well. Recently it started rough idling and misfiring a lot while driving and it was very noticable, engine shaking as well. I replaced spark plugs and coil packs, still the same. Misifiring always from cylinder 2 and 4. My mechanic said it’s carbon build up and we need to clean them, this is a 2013 tiguan 2.0L turbo. Makes sense?
@CoolAirVw Жыл бұрын
carbon builds on on intake valves frequently and causes misfires. Other things can cause it as well.
@elias1995ish Жыл бұрын
@@CoolAirVw what a hassle those engines, he quoted me 400$ for the cleanup, when it’s done I am going to sell it
@CoolAirVw Жыл бұрын
@@elias1995ish Might want to consider changing waterpump while your in there. Its plastic. If your selling it then ignore it though.
@elias1995ish Жыл бұрын
@@CoolAirVw thanks for the tip! Will sell it as soon as it’s done, i had an mk5 gti before, seems that I didn’t learn from my previous mistake 🤦♂️
@elias1995ish Жыл бұрын
@@CoolAirVw well, it was not caused by carbon buildup:/ he did a compression test and the engine cylinders are fine, did a vacum test and there’s no leak. We’re going to verify the injectors now. Any advice?
@vagtech742 жыл бұрын
Stretched timing chain ?
@CoolAirVw2 жыл бұрын
Nope.
@EXOVCDS3 жыл бұрын
I like multiple part videos!! =)
@CoolAirVw3 жыл бұрын
thanks for watching Thomas
@ИвайлоБешев3 жыл бұрын
Very informative video. Thanks. Keep doing it👍👍👍
@CoolAirVw3 жыл бұрын
thanks!
@arturomurillo5703 Жыл бұрын
hello my friend i have the same problem, but already change the head gasket already. What do you think is the problem?
@CoolAirVw Жыл бұрын
if you have misfire then you'll need more diagnosis than "what do you think is the problem".
@arturomurillo5703 Жыл бұрын
probably the problem is that infectors you think this is the problem
@CoolAirVw Жыл бұрын
@@arturomurillo5703 Gather info for diagnosis. I have a video on diagnosing misfires. Seems to be a bit of a language barrier here also. Maybe try typing in the info into google translate.
@amarabdelli487 Жыл бұрын
Thanks for sharing
@danman90173 жыл бұрын
is there a part2
@CoolAirVw3 жыл бұрын
its in edit process
@louvendran72733 жыл бұрын
@@CoolAirVw It's like a who-done-it. Lol. Tnx for the great videos
@CoolAirVw3 жыл бұрын
@@louvendran7273 I didn't mean to leave you a cliff-hanger. :)
@or-anium98152 жыл бұрын
you have brocken piston in betwin the piston ring/ well known for vw
@CoolAirVw2 жыл бұрын
Although I'm sure that's a possibility, we fixed this car, way back then, its been on the road since then, and its working great.
@thomassawtelle70893 жыл бұрын
Going off the broken lock tabs you talked about in this video. Have you ever considered doing a video showing a wide variety of electrical/ vacuum/ sensor plugs commonly used on VW/ Audi and how to get them apart without breaking anything?
@CoolAirVw3 жыл бұрын
Excellent idea
@kamanjati2 жыл бұрын
Please Help with P0341 My 2010 Tiguan has no issues when starts in the morning with cutout driving. The moment I take highway and exist minutes later, the car hiccups epic flashes one with check engine flashes once, and then move. At that point once I accelerate or slow down the error appears on screen “Check Engine Service Now”. I”lol attach my OBD and dealer reports We have done the following but the problem not going away. - Changed camshaft sensor (5 times) new - Changed spark plugs - Changed coils - Engine was removed from car, opened and changed complete came shaft - Solenoid replaced - Changed camshaft wiring - Timing chain is correct - Replaced Tensioner - Oil change (of course) Problem remains the same and more frustrating with the amount of money payed and time spent
@CoolAirVw2 жыл бұрын
Whew wee! Check that crank pulley hasn't moved on crankshaft. (small one that chain rides on).
@jook400k82 жыл бұрын
Whoaaa how much have u spent on all this kinda having a similar problem
@jook400k82 жыл бұрын
@@CoolAirVw have only 2 misfires change spark plugs coils and injectors wat could be the next step ???
@kamanjati2 жыл бұрын
@@jook400k8 it cost me more time and frustrating than cost. Mainly the cost was the parts. Now the car has been fixed, and it seems to be electrical issue (computer part and programming). Thought just found couple oil drops leaking. Will have check it out this week. I am assuming from oil pan
@CoolAirVw2 жыл бұрын
@@jook400k8 I dont know what you mean.... "have only 2 misfires". If you are looking at goup 15 and 16 and a specific cylinder shows 2 misfires then you have no problem.
@ninvin21 Жыл бұрын
Could be as simple as excess oil contacting the spark plugs and causing a misfire. Check oil levels,
@CoolAirVw Жыл бұрын
Nope.
@HotTakeAndy Жыл бұрын
😂
@ninvin21 Жыл бұрын
@@CoolAirVw Yep!
@ninvin21 Жыл бұрын
@@HotTakeAndy HAHA What a dumbass.
@CoolAirVw Жыл бұрын
@@ninvin21 Watch the video. Maybe your saying a misfire can be as simple as that. I'm saying this car WASNT that. It also could be as simple as lots of things. You might as well list all of them.
@MrBchott Жыл бұрын
Low blow about the connectors... they are sometimes brittle as egg .. dumb design 😅
@CoolAirVw Жыл бұрын
thanks for watching.,
@HotTakeAndy Жыл бұрын
Totally. I had four out of three snap.
@boazvarcoe19322 жыл бұрын
Hi there! Really appreciate your video! My partner took her car to get the coolant changed. When she picked it up, the check engine light was flashing accompanied by another - EPC. We took it straight back and the mechanic accepted no responsibility whatsoever despite me explaining that the car had 0 issues before. Now it’s in limp mode and sitting in our drive way. Is it possible that what you said around 10:52 about air leaking into the coolant could be the cause? If so, where do I check? I should also mention that the mechanic scanned the car when we brought it back and he said it was the ignition coil in cylinder two. After I change that we noticed little to no change at all 🙃 Thank you kindly for your help!
@CoolAirVw2 жыл бұрын
listened at 10:52 and I was discussing the cylinder leakdown test where the air from my test tool was going. I dont know how that applies since you dont have that tool installed on your car. These cars develop misfires all the time so it is absolutely plausible that it is unrelated to the work your mechanic did, although it is also plausible it is related to something he did. I have lots of videos on misfire diagnosis, you should employ the diagnosis techniques in those videos or get it to a mechanic you trust.
@commonsense4you Жыл бұрын
Just a horrible car. But great video, thanks for sharing!
@CoolAirVw Жыл бұрын
I like tiguans. Just dont like the CCT engine that much. dont get me wrong it runs great, but it has too many problems.
@mahmoudhantouli54343 жыл бұрын
Clean the int with 44k
@CoolAirVw3 жыл бұрын
thanks for watching.
@kimtutorials31162 жыл бұрын
What product do you use?
@rosaritomex4223 Жыл бұрын
My 2012 pruis has p300 p301 p302 misfire i took it to Tijuana they fix it for $500 :).
@CoolAirVw Жыл бұрын
i have a prius misfire video.
@motube2389 Жыл бұрын
Classic act, it’s amazing to me how every single so called mechanic on KZbin literally trashes whoever mechanic worked on the car before him😂 as if this suppose to make him look any better
@CoolAirVw Жыл бұрын
i dont know what you are talking about. I was the mechanic who worked on the car previously. So am I doing the classic act of trashing myself?