Copper Cable Recycling Machine Vaner Co2 Granulator

[@tommytom5650]

The hard drive magnet in the machine was a nice touch.

[@Oneupthesleevecustoms]

I had some issues with rubbish cable that was copper coated steel. Upset my buyer had to buy it all back and reprocessed by hand

[@Sacco112]

no idea how i've gotten here but watched it all! interesting thanks

[@Oneupthesleevecustoms]

The youtube spiral of suggestions go hold of you?

[@gasperajdnik8004]

Happens to me all the time 👍

[@Oneupthesleevecustoms]

@gasperajdnik8004 I watch so much youtube haha

[@gasperajdnik8004]

Me too , i love watching youtobe

[@scrapmanindustries]

I’ve been wanting one of those for awhile now. I’ve rigged up some home made stuff but nothing really worked like it should.

[@Oneupthesleevecustoms]

Na these work pretty well. Gotta tune it as the material changes but easy once your onto it

[@scrapmanindustries]

@@Oneupthesleevecustoms were there a bunch of "hidden fees" once you decided to buy it? online it looks like they advertise them way cheaper than the price you state it took to buy yours. but then again I've never legitimately imported anything so have no clue how that works. I've stuffed things in containers the army paid to bring back but never commercial trade.

[@charlesvannice4790]

Great video. I have a granulator as well but I'm having a hard time with the separation. My granules are dirty with plastic. I've adjuster the shaker table speed and that helps but its still got a lot of plastic. I keep the main screen clean as well. Good idea on the dust collector. I wear a respirator. I thought pre chopping the wire to two inch pieces would help ,it didn't. Different brand from yours. I also paid a.lot to get it to the states.

[@Oneupthesleevecustoms]

What brand did you go with

[@charlesvannice4790]

Gomine 240v 3 phase. I had to buy a big converter because I didn't have 3 phase power

[@Oneupthesleevecustoms]

Oh that's a issue

[@Oneupthesleevecustoms]

Is it similar in design?

[@gasperajdnik8004]

Good video mate , i wana wish you and your family a meery christmas and a happy new year. Two new songs i descoverd 2 montch ago : last of the cowboys, brothers of the higway , tonny justice has good songs , hes a trucker , good man , great songs this friday i listend to this to songs about 20 times over and over when i was repairing trucks and driving down the road 👍👍

[@Oneupthesleevecustoms]

Merry Christmas to you and your family mate

[@gasperajdnik8004]

Thank you mate

[@Oneupthesleevecustoms]

@gasperajdnik8004 hope you have some time off work

[@gasperajdnik8004]

Thanks , yeah i will 👍

[@TimConley-q3k]

Great video! I’m thinking about buying one. I have a couple of questions. We get in loads of Ethernet cable, that is harder to get clean copper from? And what would you say your yield is? Like if you processed 100 pounds of wire, how many pounds of pure copper would that yield? Thank you

[@IkeBarnett-tp7hf]

Does the blower blow in one place or under the whole screen? Is it a double layer screen? I noticed copper out of one end coating out of another. Do you have pictures from the other side opened up. Great video I am just trying to grasp how this works. Dry separation has me stumped.

[@Oneupthesleevecustoms]

Whole screen helps it spread out and lifts the light materials off the screen to be sucked up/ fall out the back. Very efficient

[@IkeBarnett-tp7hf]

I would love to see some pictures of the blower and how it’s hooked to the machine. Thankyou for taking the time to reply to me.

[@Oneupthesleevecustoms]

@IkeBarnett-tp7hf I'll make a video next time I clean it all up mate;)

[@mcxravin]

Hi, how often do you have to change or sharpen the blades in the granulator? What other kind of maintenance do you have to do? How much did you pay for the setup? Thanks

[@Oneupthesleevecustoms]

Cost around 10k aud landed gst tax import ect. I have not had to sharpen change or modify blades ect at all. 2x greese fitting on main shaft and blow it out often with a air gun. Super reliable and simple

[@simenh9208]

I just got my vaner co2 today. Did run some cabels. Both hairy wire and normal wire. But am struggeling with small amount of copper going out on backside.. Any ideas?

[@Oneupthesleevecustoms]

Is your machine level? Left right front back

[@tommytom5650]

Are you break even factoring in time, cost of wire, and the percentage gained from not selling as is at #1 and # 2 wire prices?

[@Oneupthesleevecustoms]

Oh yeah I only buy less than half the cable electrician mates give me heaps, I sell for more than bright shiney no1 copper prices so even if your stripping good stuff I get 20% more in granules as it's going to the manufacturer. Not to more middle men

[@milanjovanovski7593]

Nice video, thanks for presentation! I need one too, can you scrap 300 lbs of cables per day.

[@Oneupthesleevecustoms]

I can do 25 to 40 kgs a hour. A little less in fine data cables. I recommend adding a dust extraction system like my one I can make more videos if you have more questions

[@boywonder6659]

Hi great video and thanks for posting it. How much do you pay for your feedstock/scrap wire offcuts? Thanks.

[@Oneupthesleevecustoms]

It really depends on where I get it and who is selling it. Some of it is totally free just pick it up, other good stuff I pay up to 3.40 a kg

[@Oneupthesleevecustoms]

Thanks for watching

[@kurtremislettmyr7108]

love it, Thanks for the tip.

[@Oneupthesleevecustoms]

Thanks for watching mate they are a great machine

[@gasperajdnik8004]

Yes, it is good

[@biggiecheese5255]

Love the Color choice

[@Oneupthesleevecustoms]

Yeah they said any color I wanted so I went orange and black

[@rewiredelectricalgc8998]

Hi mate I’ve purchased this exact machine the company actually showed me your video. I see your in aus as well. Could I possibly get in touch with you via phone call to ask a couple questions?

[@Oneupthesleevecustoms]

Sure wanna contact me via face book mate or email me [e-mail]

[@randyrichmond2036]

Is that a 1 phase or a 3 phase?

[@Oneupthesleevecustoms]

Single phase 240

[@randyrichmond2036]

@Oneupthesleevecustoms English? I live in Michigan, USA, and was wondering about the price of the unit and the price for shipping?

[@Oneupthesleevecustoms]

Australian. You'll have to contact vaner machinery through allibaba

[@Zappy1210]

Just for smaller wire? Would it work on 500 mcm?

[@Oneupthesleevecustoms]

Yeah you just have to run it through a bandsaw or similar to make smaller chunks

[@simenh9208]

Nice video!🤩

[@simenh9208]

Can you show how the electricity is connected on the machine. Is it one cabel? Singel phase, three phase?

[@simenh9208]

230v or 400v?😅

[@Oneupthesleevecustoms]

You can get either. Mine is 240v

[@jeromeogivenz954]

Do you get more from the bearing manufacturer then you would the recycler

[@Oneupthesleevecustoms]

I do yeah cause it's going straight to a manufacturer. I have to ensure it's perfect or it gets rejected

[@jeromeogivenz954]

Good sir thank you for responding to me. I’m new to the Copper game. Are you pleased with your machine? Would you have gotten a larger machine I would like to get a machine and cut up harness wire out of automobiles And are you pleased with the recovery rate?

[@Oneupthesleevecustoms]

@jeromeogivenz954 power becomes a issue as you go larger but this one just plugs in

[@Oneupthesleevecustoms]

@jeromeogivenz954 yeah it misses hardly anything

[@jeromeogivenz954]

@@Oneupthesleevecustoms thank you again so much for your time. It’s hard to find anyone with experience with these machines so if you put in 200 pounds of corded wire, how much is your recovery rate 50%?

[@michaelwalton9943]

Where did you buy that machine and how much I want to buy one

[@Oneupthesleevecustoms]

Allibaba vaner machinery. Chat to them for a quote mate

[@jbproduction8703]

hello friend very good video will you tell me what is the exhalation volume in m3 and the m3 for the blower please thank you from you 👍👍✌️✌️

[@Oneupthesleevecustoms]

Let me check

[@jbproduction8703]

@@Oneupthesleevecustoms 💪💪🙏

[@jbproduction8703]

normally for the 750w blower it must be 1200m3 hour I would need the suction which must be 370w but how many m3 for the suction? thank you my friend

[@Oneupthesleevecustoms]

I think it would be over 1000 the one I have so made 500 600 m3 for a around 400w unti

[@jbproduction8703]

@@Oneupthesleevecustoms Is it possible to tell me exactly when you have time? That’s super nice of you my friend 🙏🙏🙏

[@ManpreetSingh-ni7fx]

Hello brother ... M Manpreet here from INDIA ... i want to know that In your cutter how much MM whole perforated sheet are you using ... can you please tell me

[@Oneupthesleevecustoms]

It's a 2mm screen mate

[@Oneupthesleevecustoms]

kzbin.info/www/bejne/g4inoquEbMySisU

[@jagjitsinghrandhawa]

Mach size namber please

[@Oneupthesleevecustoms]

Co2

[@jagjitsinghrandhawa]

Screen mash namber

[@Oneupthesleevecustoms]

1.5mm

[@jagjitsinghrandhawa]

Air sarpacion tabel screen mash namber

[@antonioribeiro8851]

how much does it cost?

[@Oneupthesleevecustoms]

Around 4000 usd. Plus shipping imports and taxes